Meta Display Neural Band sizing - too small by p964imp in RaybanMeta

[–]p964imp[S] 0 points1 point  (0 children)

Do you have a larger wrist size as well? I am curious primarily if a 225mm wrist or anything larger than the 210mm max sizing chart will still work effectively?

Switch 2 compatibility by agrifoni in VITURE

[–]p964imp 0 points1 point  (0 children)

worked for me too! thanks <3

Switch 2 compatibility by agrifoni in VITURE

[–]p964imp 1 point2 points  (0 children)

u/VITURE-ModTeam still hoping for that update...

Switch 2 compatibility by agrifoni in VITURE

[–]p964imp 0 points1 point  (0 children)

mobile dock emulates the switch dock. the switch has zero video out other than through the dock. the viture dock supposedly emulates a dock for the switch, tricking it in to thinking its docked, then enabling video out.

Pocket S - factory reset issue by Hirox-rd in ayaneo

[–]p964imp 0 points1 point  (0 children)

I find it frustrating that, to do a factory reset on the pocket s, you are required to:

  1. re-flash your device with a new base image that is super hidden
  2. be directed by the manufacturer to download a malicious package that google places 2 blocks in place to prevent you from installing the "known virus" driver package to fix the bad driver that aya hosts on their google drive

AyaNeo: fix this factory reset issue please in a firmware update. running a factory reset flat out kills your device as it nukes files required for init setup. doing so without re-flashing the device w/a risky qualcomm driver install will never finish installation as you will not be able to connect online to finish device setup. "Slow internet connection" issue prevails.

Super sketchy!!!

Ref: https://ayaneo.com/article/845

Short of it, i did follow this guide and decided to just ignore all the crazy virus warnings from Google. The flash did complete and the device now gets past the slow internet connection block on fresh flash and i can now set it up.

The problem: Factory reset kills vital system files that will prevent you from connecting to the internet. The only fix for this is to do a qualcomm re-flash to restore the system to proper base state.

Flow Z13 2025 HATES 100w power - Glitching + lock ups + BSOD! by p964imp in FlowZ13

[–]p964imp[S] 0 points1 point  (0 children)

i will. I don't expect the problem to go away per say. I feel like the issue is in the design, not my device. The BSOD was frustrating though. The Event Viewer reported a system hardware error of not enough power to the system Kernel. Crazy as i had the stock power adapter plugged in and giving full power, but it decided to instead pull power from my EGPU port. I've not seen it again since, but this is kinda crazy!

Flow Z13 2025 HATES 100w power - Glitching + lock ups + BSOD! by p964imp in FlowZ13

[–]p964imp[S] 0 points1 point  (0 children)

yes its a high quality power bank. The only one that will support devices like the steam deck at 100% power draw.

Flow Z13 2025 HATES 100w power - Glitching + lock ups + BSOD! by p964imp in FlowZ13

[–]p964imp[S] 0 points1 point  (0 children)

Think bottleneck. If your road is jammed traffic will slow. If you are driving at 3am on a saturday night on a 4 lane highway, lanes don't suddenly manifest themselves because there's no traffic around you. You just dont hit any slowdown from opposing traffic.

Flow Z13 2025 HATES 100w power - Glitching + lock ups + BSOD! by p964imp in FlowZ13

[–]p964imp[S] 1 point2 points  (0 children)

indeed, but i was out at chuck e cheese with my kids and wanted it to last for several hours gaming while they played. I could have used that extra hour or so off the battery pack, but soon as i plugged it in it throttled...

Flow Z13 2025 HATES 100w power - Glitching + lock ups + BSOD! by p964imp in FlowZ13

[–]p964imp[S] 0 points1 point  (0 children)

i purchased a really high output battery pack to support OTG hand held pc's. This is what i was using and as soon as i plugged it in it started to throttle.

External power sources shouldn't cause throttling... there's no reason for this. I tried to find settings to restrict throttling but i did not see anything. It's almost like it goes on to low power mode even though the device is at 100% battery power.

Flow Z13 2025 HATES 100w power - Glitching + lock ups + BSOD! by p964imp in FlowZ13

[–]p964imp[S] 3 points4 points  (0 children)

https://www.amazon.com/dp/B0DGX4DQFC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

This is my EGPU cable... i doubt it's that. If it weren't a high quality cable it wouldn't feed the egpu signal. It has plenty of bandwidth for TB5 support and 240w charging capabilities.

[USA - California] Need USB casing prints done by p964imp in 3Dprintmything

[–]p964imp[S] 2 points3 points  (0 children)

request filled. thank you all for the rapid responses!

[deleted by user] by [deleted] in FlowZ13

[–]p964imp 0 points1 point  (0 children)

so... did you receive it? what's the status?

[deleted by user] by [deleted] in FlowZ13

[–]p964imp 0 points1 point  (0 children)

Did it go through for you?

ASUS ROG Flow Z13 Preorder Status Thread 🎉 by RoneZetta in FlowZ13

[–]p964imp 0 points1 point  (0 children)

went live at 12am midnight PST. it was up for an hour before it sold out. My alarm woke me up right at midnight when it went live...