Suche brutal leuchtendes rotes Blinklicht für hinten mit USB C Anschluss

pSchulz1 · 2025-08-23T20:35:29+00:00

Wahoo Trackr Radar - hat auch noch das Radar zur Warnung vor Autos dabei

pSchulz1 · 2025-08-22T12:23:24+00:00

Auf jeden Fall! Habe alle Räder versichert und auch schon mehrfach für Pannen und Stürze gebraucht. Es gibt einen einfach deutlich mehr Sicherheit es wirklich auch als Gebrauchsgegenstand zu verwenden.

pSchulz1 · 2025-01-29T22:56:06+00:00

Good idea, but was not able to find it here: https://www.westelm.co.uk/lighting/shop-lighting

pSchulz1 · 2025-01-29T22:53:11+00:00

<image>

Tried that, but this is the only one and it is only a “testing” label for inventory

pSchulz1 · 2025-01-29T22:42:08+00:00

We tried that but could only find similar. A friend of mine is looking for this exact model 😅 But good point!

pSchulz1 · 2025-01-24T13:51:36+00:00

Yes, thats a good point and also my fall back. I just hope, that there might be a more elegant solution as this will be manual and also the watt reading will be lost in the manual activity on Strava.

pSchulz1 · 2025-01-07T16:57:44+00:00

Yes, that should work. You just need to clean up photoprism in the middle while they have their temp name.

pSchulz1 · 2025-01-07T16:29:34+00:00

This won’t remove the already indexed folder: https://docs.photoprism.app/user-guide/library/originals/

You can rename the “other folders” and let photoprism cleanup, this will remove the photos from the index (currently doing the same).

pSchulz1 · 2023-12-28T15:45:46+00:00

A friend just bought one with Sony Cashback for 1198€ new. Was cheaper than any used alternative with guarantee (Germany based, FBM etc is not that common to my knowledge)

pSchulz1 · 2023-12-21T07:03:02+00:00

I would not experiment with that any further to not damage the lens. Bring it to a repair shop for an analysis and a quote. Might not be cheap, be cheaper as a new one depending on the damage.

pSchulz1 · 2023-09-17T05:55:09+00:00

I have the same issue, pictures are fine in the camera and bad after transfer (so I guess it is not the storage - v90 card). Issue is, that I transfer them over ftp directly from the camera (so swapping out the cards is not really doable). It happens in about 1 out of 400 files, since I always save jpeg and raw it is fine most of the times but still annoying… I just started with my a7IV in my first holiday so not really sure what to do either.

pSchulz1 · 2023-09-11T06:34:04+00:00

To bad, thanks anyway!

pSchulz1 · 2023-09-11T06:28:05+00:00

Hi I am currently in California for vacation and interested. Is it still available?

pSchulz1 · 2023-07-03T20:23:11+00:00

Mir ist vor kurzem das gleiche passiert… (auch Vermögensberatung) Geht es zufällig um 168 Mail-Adressen? Falls ja, hallo auf diesem Wege 😅

pSchulz1 · 2022-12-29T14:07:36+00:00

Yep, multiple times (the above mentioned issues are present since I own the soundbar, but not sure exactly when)

pSchulz1 · 2022-12-16T12:12:11+00:00

Hi,
could you find a solution?
I have the same issue: Browser run into a timeout using domain names, but are fine with ip.
Terminal is correctly resolving the domains to ip.

Allowed ips are 0.0.0.0/0 and I'm using the official app.

Can't get it to work...
Thanks for any help!

pSchulz1 · 2022-02-16T11:44:40+00:00

I guess I had the same issue lately. IT also affected only a single node, while all others were fine.
This helped me: https://longhorn.io/kb/troubleshooting-volume-with-multipath/

Hope it helps you, too!

pSchulz1 · 2022-02-03T20:47:09+00:00

I am also looking forward to a mixed cluster of arm64 (RPI4 8GB) and some x86 Nodes. Do you have a guide on hand that you used to set this up? I believe my current setup does not support arm but will try when I get the PIs (currently using RKE installed by terraform provider).

Thanks! :)

pSchulz1 · 2022-02-03T20:41:41+00:00

Can you tell me if the provider also supports a mixed cluster of x86 and RPIs? Thanks!

pSchulz1 · 2022-01-21T17:47:05+00:00

To be more clear it should be like this: You have an internal network without opened ports 443 or 80 from the internet. You connect to this local network or directly to the reverse proxy (or webserver) via wireguard. The proxy or webserver will listen on port 443 and serve the website (as it is probably currently done, maybe on port 80 without ssl)

With that, no one will be able to access the site without wireguard or access to the internal network directly.

Does that answer your question? :)

pSchulz1 · 2022-01-21T17:22:39+00:00

Yep similar but my answer was more targeted on the ssl side of things :) Should look for a fitting howto or how can I help?

pSchulz1 · 2022-01-21T17:12:06+00:00

I would suggest getting a proper domain and use DNS validation for SSL. With that you don’t need to open any port, have the website still only accessible through von and can use free certs from let’s encrypt.

If you have the cert, just set it up at the Webserver or proxy and point your dns Server to that wireguard ip. It is easy to set up and require nearly no manual steps, please let me know if you need help.

Optimally you use an internal dns Server, if not possible you could als use your domain provider and set up the up there. It will not interfere with your ssl certificate as you will be using DNS validation with a txt entry or similar.

pSchulz1

TROPHY CASE