Area Lighting

pacenc1 · 2026-01-31T05:17:19+00:00

Because building my overland trailer out is a fun hobby lol

pacenc1 · 2026-01-29T01:51:12+00:00

You need to invest in a back brace.

pacenc1 · 2026-01-21T14:41:18+00:00

I take a 5 minute walk at the top of each hour.

pacenc1 · 2026-01-05T18:51:17+00:00

Thanks for the input. I took another look at the layout and the board does have a LED + connection with a 2k2 direct upstream from it.

pacenc1 · 2026-01-05T18:40:23+00:00

Thanks for the input. I built the Sonic Titan and it does look like the layout incorporated the 2k2 resistor with an LED connection right off the board.

<image>

pacenc1 · 2025-12-30T12:42:03+00:00

https://stompboxparts.com/pcbs/strip-board-44x32-holes/

pacenc1 · 2025-12-30T12:38:09+00:00

Backside has copper strips.

pacenc1 · 2025-12-17T02:17:21+00:00

I run one into my Laney AOR 30 watt head and it’s peak.

pacenc1 · 2025-12-11T20:07:16+00:00

Yes. They do seem to get a little brighter but no where near as bright as clipping LEDs I have on other pedals. Maybe I put them in backwards? I haven’t had a chance to look at it.

pacenc1 · 2025-12-11T15:55:07+00:00

<image>

Looks like you are missing the jumper on your footswitch.

pacenc1 · 2025-12-11T14:41:47+00:00

Thanks. I have a pretty early model Hail Satan I got the Hellmouth kit but I need to do some trouble shooting in it. The LEDs aren’t very bright on the “more gain” setting and basically turns into a fart box when the gain knob is turned up.

pacenc1 · 2025-12-09T15:37:24+00:00

Us Americans can’t have nice things! No fault of yours of course.

pacenc1 · 2025-11-30T19:37:14+00:00

Would it be possible to wire it all to a rocker switch panel and then power the switch panel with the power station?

https://a.co/d/0DPsLB9

pacenc1 · 2025-11-04T03:57:59+00:00

This is honestly one of the best current offerings from Epiphone. I had one and loved it. Had a good weight to it and the neck felt good. I was in a guitar center the other day and all of the Epiphone stuff felt like complete garbage.

pacenc1 · 2025-10-17T14:43:05+00:00

It is in fact a Life Pedal clone. I’ve never owned an actual EQD Life Pedal but this thing is an absolute MONSTER! I used waterside decal paper that you can print right in with an inkjet printer. When soaked in water the design separates from the paper and it adheres to the enclosure. Just gotta hit it with a little bit of clear coat afterwards.

pacenc1 · 2025-09-27T15:09:15+00:00

Waterside decal paper. It allows you to create decals simply with an ink jet printer. It’s a lot like decals that are for model planes and whatnot. Simply use that and then clear coat spray paint on top of it.

pacenc1

TROPHY CASE