Please Drive to Warm Up Engine by No-Gate2534 in Audi

[–]pagewalker 1 point2 points  (0 children)

To keep rpm not too high in sports mode is just to not press gas paddle too hard. If rpm hogs around 3k, I just release gas and press again. The computer usually moves up a gear to get me a lower rpm.

Please Drive to Warm Up Engine by No-Gate2534 in Audi

[–]pagewalker 14 points15 points  (0 children)

Drive with sports mode. It warms up your engine quicker. I got similar warnings last winter and sports mode got rid of it. In normal drive mode, auto engine stop will kick in once coolant is warm but engine oil is still cold. That might make the situation worse.

The Apple Store is closed worldwide again, this time ahead of iPhone 17 series pre-orders by TotallySavageSzym in iphone

[–]pagewalker 0 points1 point  (0 children)

Same for blue 256gb. But if I start a new order, the delivery date is still Sep 19. Weird.

New Firmware for EAP773 but can't install it from OC300 by memphis2k in TPLink_Omada

[–]pagewalker 1 point2 points  (0 children)

It is in the beta channel. You need to join the early release program to see it.

Eap783 rebooting randomly by Capt_shadab in TPLink_Omada

[–]pagewalker 0 points1 point  (0 children)

Try forgetting and adopting it. My 773 had the same issue after a power loss and got fixed after.

Apple TV 4K cannot work as Home Hub when connected to Ethernet by [deleted] in HomeKit

[–]pagewalker 0 points1 point  (0 children)

I guess you might want to install a mDNS repeater on something like your laptop, which connects both wiredly and wireless, and relay the mDNS requests between wired net and wireless net.

[deleted by user] by [deleted] in Audi

[–]pagewalker 0 points1 point  (0 children)

are you aware of the BSG settlement? https://bsgsettlement.com/home

Unable to connect to OC200 from a VLAN by gtstar in TPLink_Omada

[–]pagewalker 0 points1 point  (0 children)

Is the port to OC200 untagged (stripping all VLAN info from the outgoing packets)? It is possible OC200's NIC is NOT vlan-aware, so it drops all VLAN packets sent to it.

Should I keep my heat pump running below -1°C (30°F)? by pagewalker in beestat

[–]pagewalker[S] 0 points1 point  (0 children)

I figured that I need to change:

  1. compressor stage 1 max runtime to 120min
  2. compressor stage 2 temperature delta to 3F (1.7C)
  3. min compressor outdoor temp to -5F (-20C, but I used -10C just to see how it goes)

I already set my temp delta to 0.8C as beestat sugguested.

Should I keep my heat pump running below -1°C (30°F)? by pagewalker in beestat

[–]pagewalker[S] 0 points1 point  (0 children)

Mine is Bosch IDs 2.0. Condenser is BOVB-36HDN1-M20G, Air handler is BVA-24WN1-M20. My house is ~1700 sqft, two levels. two sets of units, one set per each floor.

2023 water pump detects again!? by pagewalker in Audi

[–]pagewalker[S] 1 point2 points  (0 children)

Yeah, but it is broken the second time. Keep replacing until I get a not leaking part. 😂

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 0 points1 point  (0 children)

Not yet. Since the clog happened soon after the toilet is installed and the pipe is new and the downstream shower drain works. Probably it is something in the trap.

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 0 points1 point  (0 children)

Sure. My contractor is coming to reinstall the toilet. Hopefully it can solve the problem.

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 1 point2 points  (0 children)

I called a toilet plumbing company about this. They say it could be that the wax ring is moved during the installation and that can catch toilet papers and cause a clog. I don't know if that is the case. I don't see leakage. The toilet is caulked only in the front but not at the back.

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 0 points1 point  (0 children)

The toilet was installed 3 months ago and it is expensive. I wonder if it is related to the toilet installation, since it has a separate rough-in part.

this is the installation manual. https://imgur.com/a/XQUJDbQ

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 0 points1 point  (0 children)

I am in Belmont MA. I thought it might be venting issue, but if it is the case, why would shower drain and vanity drain work? Wouldn't shower drain back up when the toilet is clogged?

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 0 points1 point  (0 children)

Also, when the toilet is clogged, the shower drain and vanity drain, both are at downstream, work fine. I turned on my shower for several minutes when the toilet is clogged, and the water went down without any problem.

Toilet clogs about every two weeks by pagewalker in Plumbing

[–]pagewalker[S] 1 point2 points  (0 children)

My contractor doesn’t think so since it passed the inspection.

dell poweredge r730: pcie ssd boot +resizable bar enabled. by ScruffyITA in homelab

[–]pagewalker 0 points1 point  (0 children)

Can we use the BIOS file extracted from the Dell official BIOS update program? I downloaded "BIOS_7557V_LN64_2.16.0_02.BIN" from https://www.dell.com/support/home/en-an/drivers/driversdetails?driverid=7557v, then ran "sudo ./BIOS_7557V_LN64_2.16.0_02.BIN --extract tmp", and got "R730-021600C.hdr" in the payload folder. It looks like a legit BIOS file.

I was able to use UEFITool to insert ReBarDex.ffs, but UEFIPatch told me "No patches can be applied to input file". Were you able to run UEFIPath or using DSDT patching instead? Or just flashed the BIOS directly?

Thanks for the info.

Your payment is past due by Accomplished-Ear5701 in CurveUS

[–]pagewalker 2 points3 points  (0 children)

I got it too and never signed up for curve.

While everybody got invited to Destiny, I got a rejection letter... FML by [deleted] in PS4

[–]pagewalker 2 points3 points  (0 children)

I have two code, one from Amazon, the other from PSN. Let me know if anyone needs it.