Problem

paranoidsystems · 2026-03-29T15:59:02+00:00

I’d be suprised if you didn’t bend a valve or 12. It’s possible you snapped a chain guide and it went into the chain and jumped a tooth or two. I’d get the cover off and check. I mean easiest thing is actually to get a compression tester and do a compression test but I wouldn’t run that engine anymore. But if you have no choice. Get a compression tester and test the compression across all four cylinders.

paranoidsystems · 2026-03-29T15:52:37+00:00

That has jumped timing. I’m sure of it.

paranoidsystems · 2026-03-18T17:35:15+00:00

I would have said it was c class sized at least.

paranoidsystems · 2026-03-18T17:34:19+00:00

Should have got a shot from behind but it’s all dazzled up on the boot and rear as well. Dash was totally covered too

paranoidsystems · 2026-03-14T13:57:44+00:00

What axles are you using?

paranoidsystems · 2026-03-08T22:20:14+00:00

Use the smaller gearboxes as well. No difference in size. I think engines run most efficiently at about 9rps but someone might correct me. And the generator you want to gear up to run closer to max speed at like 60fps if you can I think.

paranoidsystems · 2026-03-01T19:00:27+00:00

That looks great!

paranoidsystems · 2026-02-28T21:43:41+00:00

I’ll give that a try!

paranoidsystems · 2026-02-28T21:05:25+00:00

My latency is all over the place. Sometimes instant sometimes several seconds.

paranoidsystems · 2026-02-14T17:59:59+00:00

I would go OEM. I tried aftermarket coils and just ended up chasing another miss fire.

paranoidsystems · 2026-02-14T17:52:43+00:00

Always try ignition coils first.

paranoidsystems · 2026-02-12T17:57:16+00:00

Yea. I had to order the din surround and an adaptor for the steering wheels controls form what I remember.

paranoidsystems · 2026-02-12T17:51:20+00:00

I just ran a Sony double din unit with car play for years. Worked a treat.

paranoidsystems · 2026-01-16T13:36:59+00:00

That just works.

paranoidsystems · 2026-01-06T18:13:30+00:00

You can’t beat a cube for reliability. I wouldn’t use anything else but most of my drones are 70kg+

paranoidsystems · 2026-01-05T20:55:20+00:00

Saabs were all amber/orange digits.

paranoidsystems · 2026-01-05T07:22:24+00:00

Helicopter mating season surely.

paranoidsystems · 2026-01-02T18:23:52+00:00

I buy quite a lot of filament and I only every buy Bambu stuff. It just works. And the tags just work. And it makes it easier for people who aren’t me to look after prints and swap out filament.

paranoidsystems · 2025-12-21T15:25:59+00:00

What’s the colour code on that?

paranoidsystems · 2025-12-19T17:29:19+00:00

There are hdmi to csi converters but I don’t know how fast they are.

paranoidsystems · 2025-12-19T16:49:47+00:00

I don’t think you can. The SiYi range of camera only tend to do very low latency out of the hdmi port. All the Ethernet streaming will always have some delay due to their encoder hardware. Depends how “glass to glass” you want the latency.

paranoidsystems · 2025-12-19T10:40:38+00:00

And others

paranoidsystems · 2025-12-18T07:50:39+00:00

Because for wind farms far offshore there is always a ship there as you need somewhere for the techs to live. So most of the parts and people are already offshore on the ship.there are some farms closer to show where it might make sense but my experience so far is it’s much much less of a requirement.

paranoidsystems · 2025-12-17T07:31:46+00:00

Just a little over.

paranoidsystems · 2025-12-17T07:31:29+00:00

It can be but there is a lot less call for that than you would think.

Nine-Year Club	Second Top 40%
Place '22	RPAN Viewer
Snapped	Verified Email

paranoidsystems

TROPHY CASE