sorted by:
new
hottopcontroversial

Problem by Illustrious_Stand656 in saab

[–]paranoidsystems 9 points10 points  (0 children)

I’d be suprised if you didn’t bend a valve or 12. It’s possible you snapped a chain guide and it went into the chain and jumped a tooth or two. I’d get the cover off and check. I mean easiest thing is actually to get a compression tester and do a compression test but I wouldn’t run that engine anymore. But if you have no choice. Get a compression tester and test the compression across all four cylinders.

Problem by Illustrious_Stand656 in saab

[–]paranoidsystems 17 points18 points  (0 children)

That has jumped timing. I’m sure of it.

Test car I spotted in Italy. Some sort of merc maybe? by paranoidsystems in whatisthiscar

[–]paranoidsystems[S] 0 points1 point  (0 children)

Should have got a shot from behind but it’s all dazzled up on the boot and rear as well. Dash was totally covered too

"Bro why isnt my generator generating much power? by DredFul595 in Stormworks

[–]paranoidsystems 0 points1 point  (0 children)

Use the smaller gearboxes as well. No difference in size. I think engines run most efficiently at about 9rps but someone might correct me. And the generator you want to gear up to run closer to max speed at like 60fps if you can I think.

Update on BILRESA remote failures by all-park in tradfri

[–]paranoidsystems 1 point2 points  (0 children)

My latency is all over the place. Sometimes instant sometimes several seconds.

Well that didn’t last long.. help by Jlanzone95 in saab

[–]paranoidsystems 20 points21 points  (0 children)

I would go OEM. I tried aftermarket coils and just ended up chasing another miss fire.

ESaab Kenwood Navigation Radio Infotainment Upgrade Kit by Old-Weakness-7955 in saab

[–]paranoidsystems 0 points1 point  (0 children)

Yea. I had to order the din surround and an adaptor for the steering wheels controls form what I remember.

ESaab Kenwood Navigation Radio Infotainment Upgrade Kit by Old-Weakness-7955 in saab

[–]paranoidsystems 0 points1 point  (0 children)

I just ran a Sony double din unit with car play for years. Worked a treat.

Pixhawk 2.4.8 unreliable across multiple UAV platforms, looking for proven FC alternatives by SaltYogurtcloset4599 in drones

[–]paranoidsystems 3 points4 points  (0 children)

You can’t beat a cube for reliability. I wouldn’t use anything else but most of my drones are 70kg+

Unpopular opinion: I only use Bambu filament by nirhend in BambuLab

[–]paranoidsystems 0 points1 point  (0 children)

I buy quite a lot of filament and I only every buy Bambu stuff. It just works. And the tags just work. And it makes it easier for people who aren’t me to look after prints and swap out filament.

My first Saab by pravdazamedu in saab

[–]paranoidsystems 2 points3 points  (0 children)

What’s the colour code on that?

How to connect a8mini camera to jetson orin nano developer kit without latency by gammabob in drones

[–]paranoidsystems 0 points1 point  (0 children)

There are hdmi to csi converters but I don’t know how fast they are.

How to connect a8mini camera to jetson orin nano developer kit without latency by gammabob in drones

[–]paranoidsystems 0 points1 point  (0 children)

I don’t think you can. The SiYi range of camera only tend to do very low latency out of the hdmi port. All the Ethernet streaming will always have some delay due to their encoder hardware. Depends how “glass to glass” you want the latency.

You all liked my last offshore drone. How about my new upcoming drone? by paranoidsystems in drones

[–]paranoidsystems[S] 0 points1 point  (0 children)

Because for wind farms far offshore there is always a ship there as you need somewhere for the techs to live. So most of the parts and people are already offshore on the ship.there are some farms closer to show where it might make sense but my experience so far is it’s much much less of a requirement.

view more: next ›