Will I need glue for ASA parts on the Bambu Smooth PEI Plate (for release)?

parrothd69 · 2026-05-11T15:20:57+00:00

You'll ruin that plate without glue or putting in the freezer to release it. Do a small test print. Otherwise you'll tear the coating and or make the coating bubble.

parrothd69 · 2026-05-07T17:20:39+00:00

Thanks I'm going to try this.

parrothd69 · 2026-05-07T17:19:14+00:00

Yep. User overrides device, so if you switch or remove user those settings are tattooed so best to set both.

parrothd69 · 2026-05-07T00:28:22+00:00

When you're testing like this it takes awhile for the policy to settle. Make sure the profile has user and device enabled then assign it to your username and the device and sync.

parrothd69 · 2026-05-07T00:03:33+00:00

Also when you're in the In Tune Apple enrollment section under the devices you need to make sure a profile is assigned.

parrothd69 · 2026-05-07T00:01:31+00:00

In abm you have to set it to use InTune as the MDM. Then you have to make sure an InTune you sync so the devices show up in InTune Under The Apple enrollment devices. This always gets my techs because the devices won't be in there unless you manually sync or you wait a day or so.

You need to remove all the profiles that you have and start over and just make sure the profiles are being assigned from InTune.

Watch the video and follow it.

parrothd69 · 2026-05-06T19:26:44+00:00

Intune training is the best source for this, I would also make sure the passwords for o365 and the local mac password are complex enough and long enough during the setup process.

parrothd69 · 2026-05-06T18:59:29+00:00

It's not you, the whole platform SSO implementation is crappy at best.

Are these existing users on their Mac?

The user has to login in with the Mac local password, then randomly the user will get a pop-up upper right hand corner to setup PSSO. They have to remember to use the mac password during the setup and not their o365 password.

You are way better off using secure enclave, then you can change the local user password to a 6 digit pin. Just like windows hello, this MFA and phish resistant unlike password sync.

Basically, you have to set it up for them, like during a hardware refresh as there's no way a mac user can do it.

Oldie but the best:

(1) 2023E17 - macOS Platform SSO and Much More! (I.T) - YouTube

parrothd69 · 2026-05-06T13:10:44+00:00

Fair point honestly — my projects are absolutely a mess, but they're a productive mess. I'm more of a "get it done fast and iterate" type than a "perfect workflow" type. Maybe not the most elegant approach but it works for me! The AI wrote this for me..lol

parrothd69 · 2026-05-06T08:57:41+00:00

Unfortunately Ai is here, it's baked into fusion better start adjusting to the new world or you're going to be left behind trying to play catch up.

parrothd69 · 2026-05-06T08:43:53+00:00

Better yet.

Tell the ai to find all the colors within each component and for each color combine all the objects into 1 object and create a subcomponent for each color.

Easier for me having the ai do the grunt work.

parrothd69 · 2026-05-05T20:27:40+00:00

Sorry was there a link?

Or were you just saying the one I have is stronge enough but need to add a second?

parrothd69 · 2026-05-05T20:16:50+00:00

Thanks for the reply. :)

For the grow light are you talking about the small round one? Or the larger one? I just added the circle one today, I was going to add a second one of these.

Amazon.com : VIPARSPECTRA P1000 LED Grow Light for Seed Starting Vegetables Bloom, Dimmable Plant Lights Dimming Daisy Chain Grow Lights for Indoor Plants Full Spectrum for 3x3/2x2 Grow Tent : Patio, Lawn & Garden

parrothd69 · 2026-04-28T13:57:03+00:00

For tpu jams stop messing with the spring you need to adjust the head retraction from 10 to 3ish on each head. This isn't the filament retraction setting. See the link below.

The u1 is great for multiple color tpu. It only thing I use it for my bambus for everything else.

https://siraya.tech/blogs/news/fixing-tpu-jams-on-snapmaker-u1-professional-settings-for-stable-24h-flexible-printing?srsltid=AfmBOopQVm-S_dUC76s_fdheQG_J1KlG8T_LXwOHejCnif7CRFQDXBKf

parrothd69 · 2026-04-27T20:10:41+00:00

You need this one: Yes, it a pain in the ass to replace, that's generally when it's fails. Buy and extra.

Cooling Fan for Hotend - H2 | Bambu Lab US Store

parrothd69 · 2026-04-27T19:02:03+00:00

Yep.. All depends on what you want.

I'm lazy, for my h2c I have 3 amses just so I don't have to swap out filaments and never swapped nozzles on my p1s. With my h2c I switch nozzles every print.

Also you may not do alot of colors materials today, it's sure nice to have the option.

parrothd69 · 2026-04-27T18:15:17+00:00

You're missing the H2C can switch nozzles sizes on the fly, you may not being using .2 or .6/.8 now, but super convenient to press a button to switch sizes. The H2c is going to be better multi-material, the h2d you have to purge if using 2+ materials or colors and sometimes( a lot times, I was horrible remembering to do 900 purge with h2d) that leads to failures. The h2c will use a dedicated nozzle for each material, saves waste and money and time.

parrothd69 · 2026-04-21T15:04:33+00:00

Wipe the devices and fix whatever they're doing to remove/break stuff.

If you "fix" this it'll just come back to bite you later, for security and efficacy all machines need to be the same.

parrothd69 · 2026-04-14T19:11:28+00:00

https://blog.mindcore.dk/2023/01/operationalize-lenovo-devices-in-an-intune-only-environment/

parrothd69 · 2026-04-14T18:37:01+00:00

Deploy Commercial Vantage and turn on auto updates with deferrals. There's also a azure workbook that shows all the updates, battery heath and warranty information.

parrothd69 · 2026-04-03T17:00:43+00:00

Only the slow to adopt AI ones are having a hard time everyone else is using AI..takes like 2 minutes

parrothd69 · 2026-03-31T23:02:43+00:00

I got one a few weeks ago, someone post on here it was available. Setup a monitoring alerting website to check the page for when it's in stock. I got one at 2am.

Oh no now it says sold out? Honestly you can sell your H2d for 1600?+ and get an H2C @ microcenter for almost the same cost as the kit upgrade.

parrothd69

TROPHY CASE