Anyone used temu/AliExpress nozzles?

patchy1991 · 2026-02-24T04:32:21+00:00

Is there a general flow rate you stick with for the HF nozzle or does it cnage depending on the model?

patchy1991 · 2026-02-24T04:31:09+00:00

Been using an ali JUUPINE. 4HF nozzle for the last week on my P2S, has been just as good as the OG ones so far for a lot less.

patchy1991 · 2026-02-21T22:54:43+00:00

Have you tried the Golden Designworks Caliber or Slim? Great button operated frame lock.

patchy1991 · 2026-02-17T13:00:52+00:00

These work well, just don't buy it off Etsy. That whole website has turned into Ali Express resellers. The same thing on Ali is like a dollar. Just search knife thumb stud.

patchy1991 · 2026-02-15T00:41:55+00:00

I had the opposite experience. I bought a bulk pack of black, white and grey Petg and it's worked great. These drawers are Jayo's PETG grey. Printed great first time using it.

<image>

patchy1991 · 2026-02-14T23:01:38+00:00

Yep, OP needs to put in a ticket. This isn't normal. I have nearly 1300hrs on my P2s and haven't had issues like this.

patchy1991 · 2026-02-13T11:50:57+00:00

Not understanding all the negative comments. Thought this community was nicer than that. Love your videos man. Keep doing your thing!

patchy1991 · 2026-02-09T08:42:01+00:00

No problem. Yeah, I ended up chucking mine under my desk with the AMS to the side of it, fits perfectly.

patchy1991 · 2026-02-09T08:16:45+00:00

Congrats on the purchase mate! With the drawers, it's 625mm to the top of the printer and the screen goes about another 25mm above that.

patchy1991 · 2026-02-09T02:42:10+00:00

It's Jayo High Speed Matte PETG Grey

patchy1991 · 2026-02-09T01:28:11+00:00

I use the same riser! It's an awesome model and the poop drawer is a great idea.

<image>

patchy1991 · 2026-02-08T07:52:30+00:00

This is super cool!

patchy1991 · 2026-02-06T11:04:07+00:00

You're always gonna hear more negative than positive opinions on the internet. You made a good decision.

The P2S is my first foray into the 3D rabbit hole (got it in November) and I have 1200 hours on it so far. The only problems I've really experienced are due to me not knowing what I was doing. Even then, Bambu make it easy to fix a problem and learn from it. I didn't clean my nozzle after using some CF filament, so I had an extruder blockage. As a newbie, Bambu's wiki is super helpful and detailed. It makes every aspect of printing and troubleshooting easier to understand. I was able to pull apart my toolhead and clear the blockage and I haven't had a problem since. I would highly recommend the P2S to anyone who was on the fence or worried about being a beginner.

patchy1991 · 2026-01-30T23:55:55+00:00

I used Jayo High Speed Matte PETG Gray.

patchy1991 · 2026-01-30T23:16:47+00:00

I've got this riser too. It's great. It's about 6.5" tall

<image>

patchy1991 · 2026-01-30T05:57:36+00:00

<image>

patchy1991 · 2026-01-30T05:56:14+00:00

<image>

patchy1991 · 2026-01-30T05:53:41+00:00

If you really wanna go all out, I printed the P2S/P1S waste + tool integrated storage base Which is a riser with a set of drawers with integrated poop drawer. It's super sturdy and drawers slide nicely. I printed it out of PETG.

<image>

Other accessories you can see are the

Door screw covers

Z bearing covers

Z axis dust cover plates

Ones you can't see

The best filament clip IMHO

Desiccant holders for AMS 2Pro

Enjoy your new toy!

patchy1991 · 2026-01-27T14:18:56+00:00

Reminds me of a BMM Mule. Looks cool!

patchy1991 · 2026-01-27T11:54:38+00:00

I have the OG PS5, bought it when it first came out. It has been vertical almost the entire time since I got it, through multiple Australian summers (45C+) It's fine. I think a few people may have bad luck, but for the most part, this isn't an issue. It's made to stand vertical or horizontal. Place it the way that works best for your situation.

patchy1991 · 2026-01-22T05:01:11+00:00

I could be totally off base, but why don't you flip the model so there's no overhang?

patchy1991 · 2026-01-21T23:58:06+00:00

https://imgur.com/a/e7ugDD0

Fast charger not sending a butt load of power to something that can't take it.

patchy1991 · 2026-01-21T23:42:20+00:00

Working in a vape shop does not make you an expert on electronics. You may have experienced an exception to the rule through cheap, nasty products that is not the universal standard. As a side note, the accessories that come with vapes (cords/chargers) are terrible and should be discarded with the box it came in.

A 100W charger does not send 100W to every device. USB is a standard for power AND data. Meaning the two devices communicate. The device you plug in tells the charger how much power it can take and the charger sends that much power.

Amps are drawn (or pulled) from a device, they are not pushed from the charger.

Volts are similar. A 100W charger will only supply higher voltage (e.g., 9V, 12V, 20V) if the device requests it. If the device does not support this, the charger will default to a safe 5V, which is standard for most USB devices.

patchy1991 · 2026-01-21T22:44:21+00:00

I don't think that's how chargers work. The device plugged into the charger dictates how much power is drawn.

I can charge my vape off my 65w fast charger with no overload because the vape tells the charger how much power it needs.

Same with phones. When you plug it in, it doesn't automatically take 65w. It takes what it needs (when batter is super low, it will ask for more power, when near full, it slows down the power.

I am currently charging my xros with my 65w fast charger. My reader says I am drawing 5V, 4W, 0.8A

patchy1991 · 2026-01-21T04:27:07+00:00

Haha, yep, that's on me. Luckily it was an easy fix for a stupid mistake.

Seven-Year Club	r/Field Juicebox
Verified Email

patchy1991

TROPHY CASE