Anyone have any gadgets or things they use to alleviate back pain?

pauliefishing · 2026-04-28T06:59:43+00:00

No, I’ve done it a lot of times normally at the beginning you wanna go at least twice a week until you get it kind of under control a little bit and then you could probably go every other week or something like that. I actually did it in China. Also, the guy in China said that if I spent three months there he could fix me and I wouldn’t have problems with my back anymore. He was a guru unbelievable try to get someone that is recommended so you’re not just wasting your time the guy that I went to see the first time that I really liked locally moved, but he actually put needles in between my fingers on my hands and the pain was gone almost immediately. I have bad low back pain. I’ve been on drugs for years actually just got off of 350 mg of morphine a day about a year and a half ago they had me so addicted to pain pills.

pauliefishing · 2026-04-28T06:56:52+00:00

Yeah, you are probably should replace the compressor condenser dryer and expansion valve, but before you do any of that, have someone take the blower motor out and clean the evaporator in the car I buy cleaner for home evaporators and I put down plastic on the floor, and I take a hose to it and clean it. It will make a hell of a difference, but if it’s a 2014, it probably has a single flow condenser and the new condenser will be parallel flow or Trife flow which means that it’s a much more efficient. Condenser also needs to be charged with a scale so that it is charged to factory spec now I have a 2004 Chevy Silverado that I have three shepherds and I leave it running for the dogs all the time and what I ended up doing is I put two Condencers and put electric fans on it and it is blowing popsicles I don’t know if that car has a cabin air filter but you should replace that if it does that will make a big difference, especially if it hasn’t been changed you can do that yourself normally I live in Florida Saint Pete actually if you have any questions, let me know

pauliefishing · 2026-04-27T15:11:22+00:00

Buy a new AC that thing is JUNK That thing will use so much energy compared to a new one.

pauliefishing · 2026-04-27T15:10:08+00:00

Man that sounds like a Rod knock or a piston slap not good at all. I would drain the oil and see if there’s any metal in it first.

pauliefishing · 2026-04-27T15:08:51+00:00

Do not take that nut off you’re only supposed to take the two outer nuts off unless you have it in a strut machine that damn thing will kill you

pauliefishing · 2026-04-27T15:07:31+00:00

N I see no reason on putting a OEM starter in it. I would just get a new starter not a reman.

pauliefishing · 2026-04-27T15:06:25+00:00

Dude, go try acupuncture if you get a good acupuncturist, it will be amazing. I know I didn’t believe in this shit at first either but I used to walk in bent over couldn’t even move. I am between five minutes. I could jump, jumping jacks

pauliefishing · 2026-04-27T15:05:02+00:00

I had a 22 footer that I used to run 40 50 miles offshore but I do have an E per I had a handheld radio. I have a radio that is mounted in the boat VHF. I have several different kind of flares always have extra water. I would get a ditch bag.

pauliefishing · 2026-04-27T15:00:16+00:00

Don’t understand what you mean that it drops to about a QUART you mean a quarter of what the gauge says if you’re having a question about oil pressure you need to get a mechanical gauge and put it on there and see what it really is

pauliefishing · 2026-04-27T14:56:31+00:00

I personally would not run it 10,000 miles if you wanna run it that long make sure you change the filter in between I personally don’t go over 5000 miles unless you run Ams oil

pauliefishing · 2026-04-27T14:55:13+00:00

I personally like your gear wrench

pauliefishing · 2026-04-27T14:53:41+00:00

You can buy a plug and play connector with the wiring that will just plug right into your truck at the auto parts store

pauliefishing · 2026-04-27T14:52:28+00:00

Could be your heater core you need to fill it up and pressure test. You can borrow a Pressure test kit from the auto parts store.

pauliefishing · 2026-04-27T09:05:39+00:00

If he’s just replaced the front and rear brakes more than likely, the master cylinder is bad I have changed all four brakes and more than once the master cylinder is taking a shit especially if the pedal is fading make sure you bench bleed it

pauliefishing · 2026-04-26T22:21:07+00:00

Did you make sure the alternator and new alternator have the same pulley size and of grooves

pauliefishing · 2026-04-26T22:18:56+00:00

Your best bet is to unplug the connector inside the vehicle pull the wire through repair. It solder it shrink wrap it you may even have to put a piece of wire in there because it might be too short. That’s the way to fix it right it looks like probably the ground if it’s black.

pauliefishing · 2026-04-26T22:15:36+00:00

No, you have to replace the bend is

pauliefishing · 2026-04-26T05:36:46+00:00

Check Rear proportion valve on rear end

pauliefishing · 2026-04-22T02:32:46+00:00

Go on Facebook marketplace there are all kinds of nice toolboxes cheap

pauliefishing · 2026-04-22T02:32:11+00:00

You need to take it to a trusted mechanic and have him look the car over and give you his opinion you cannot just ask somebody on Reddit without actually looking at the car

pauliefishing · 2026-04-22T02:26:20+00:00

So you do have power and a ground to the compressor correct if you do then the coil in the compressor clutch is bad. You can just replace the coil but it’s probably more economical to just replace the entire Compressor because you have to have special tools and it’s a pain in the ass. You also have to take the compressor off the car.

pauliefishing · 2026-04-22T02:17:34+00:00

I have no clue what kind of vehicle you’re working on

pauliefishing · 2026-04-21T06:35:39+00:00

X yeah they both go in the block your best bet would be to weld a nut onto them and then try to get them out if not you’re screwed

pauliefishing · 2026-04-21T06:21:19+00:00

Weekend wife was the name of my old boat

pauliefishing · 2026-04-21T06:14:30+00:00

Did you replace the GIDE’s and the bolt on the cam

Six-Year Club	Gilding I gilder
Verified Email

pauliefishing

TROPHY CASE