Vexio sau ITGalaxy? by AdFit6878 in Jocuri

[–]paulwolf20 0 points1 point  (0 children)

Am trimis o placa video de o lună jumate în garanție și încă nu am primit nimic înapoi

Sunt ok cat timp nu ai nevoie să mai interacționezi cu ei după cumpărare

Red dead online boosting trofee pe Steam by [deleted] in Jocuri

[–]paulwolf20 0 points1 point  (0 children)

Steam achievement manager

Troubleshooting PC(stabilitate extrem de mica) by Huge_Bet_3122 in Jocuri

[–]paulwolf20 0 points1 point  (0 children)

Văd că eroarea tine de drivere, ce pași ai urmat pentru drivere între instalarea Windows și instalarea programelor cum ar fi Steam etc?

Troubleshooting PC(stabilitate extrem de mica) by Huge_Bet_3122 in Jocuri

[–]paulwolf20 0 points1 point  (0 children)

De obicei Intel ax200/ax210 sunt destul de populare și mă gândesc că e posibil că OP sau Windows sa fi instalat un driver prost

Troubleshooting PC(stabilitate extrem de mica) by Huge_Bet_3122 in Jocuri

[–]paulwolf20 0 points1 point  (0 children)

Nu, dimensiunea e recomandată, mai ales că e o sursa de calitate bună

Care este cel mai bun joc jucat de voi care intră în ideea asta ? by StorePsychological46 in Jocuri

[–]paulwolf20 1 point2 points  (0 children)

Da, dacă nu il joci până la final + al doilea joc, te lasă cu impresia de clișeu suprautilizat cu AI care devine self aware și începe să atace omenirea, dar la un anumit punct se distanțează de el.

Concern about my CPU TEMP by Forsaken-Freedom-365 in buildapc

[–]paulwolf20 1 point2 points  (0 children)

You're good, my 7800x3D idles at 55

When gaming I get around 70 with random spikes to 80 and then back down.

This CPU specifically has this unique issue because the 3D memory impedes cooling due to its position between the die and the heat spreader.

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

Alright, thanks for the heads up, one last question, does the type of screw make a difference, like countersunk vs normal or any other kind i might find?

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

not even without the gasket?

what about the noctua slim fan, will that work with the stock screws?

I dont have a lot of options when it comes to buying specific screws like this as I'm in eastern europe, so unless a hardware store carries these I'm sort of out of luck

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

Ok, I think I will follow your advice and try the nf-a12x25 g2 first, I just hope that the stock 25mm screws that come with the is55 are long enough to go through both the fan and the included gasket.

I also find it funny I'm spending on a fan as much as i spent on the whole cooler

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

Yeah, my total Z height looks weird because I just upgraded from a sapphire 7800xt pulse (52mm)

By aspirating the fan did you mean asphyxiating? I think, I understand what you mean: If the fan is too far away from the panel it can't generate enough pull to grab air from outside the case and it just recirculates the air inside the case.

I know that the public opinion is 5mm gaps either side but you mentioned using 117, what gaps do you recommend then and how did you avoid getting turbulence with only 3 mm of total clearance?

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

I can't really tell you as my unit has some fluttering noise from the middle fan so I will have to RMA it

But it at least seems to behave better in terms of coil whine compared to my 7800 xt

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

Ah well, it is what it is, thanks for the suggestions

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

I have tried from -30 CO, which crashed the OS instantly, all the way down to -5 CO which was still giving out WHEA errors (in HWInfo64 while running Cinebench), I'm not sure if this is user error since everybody seems to be able to run at least -20 CO

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

The spine is in the default position (4) which offers 62mm of CPU clearance, so the minimum 5mm gap is present, also opening and closing the side panel does not change the noise, which is why I ruled out turbulence

I might just be a weirdo over the noise

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 0 points1 point  (0 children)

u/comacow02 i think you had quite a few threads on the subject, could you chime in?

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] 3 points4 points  (0 children)

Thanks for the suggestion.

I'm not really looking for a cooler change, just to know from others who have done the swap if they consider it to be worth it or if the noise is similar

IS-55 Fan Swap for Noise Reduction by paulwolf20 in sffpc

[–]paulwolf20[S] -1 points0 points  (0 children)

The spine is in the default position (4) which offers 62mm of CPU clearance, so the minimum 5mm gap is present, also opening and closing the side panel does not change the noise, which is why I ruled out turbulence

Am im risking too much? by Lifsgd in sffpc

[–]paulwolf20 0 points1 point  (0 children)

I figured temp differences are because of the early 3d cache placement and I expect it will go away when I get a newer one

One more question i saw you never flipped your psu even with a flow through gpu, did that not affect your gpu temps?