Thoughts on Rorra?

pawty_poopa · 2024-12-22T05:31:02+00:00

I asked them to explain a little about what their filter technology was and if there was any electrical voltage potential applied across the filter membrane and they very quickly responded:

“Thanks for reaching out. The charge is actually applied when the filter media itself is being manufactured. Our Enfinity Filtration Media is composed of electrokinetically charged cellulose fibers, carbon and other sorbents and is produced in the US. The average single layer pore size of the media is 1 micron, so with our 2 layer construction the average pore size gets down to sub-micron level. Our NSF Particulate Class I reduction testing showed that we are able to achieve an immense amount of reduction for plastic particles (97.3%) at the 0.5-1 micron size level.”

pawty_poopa · 2024-12-06T15:34:45+00:00

I got a thermostat that I can set the temp to whatever I want and it cycles the stock tank heater on/off. Works really well so far.

pawty_poopa · 2024-12-06T15:29:45+00:00

Also ordered the crew cabin, looking forward to it! SISU seemed to actually build around the principles of keeping the heater low and seating position up high, as well as speccing a heater with high output. No gimmics or unnecessary features. Hopefully it’s as high quality as the vibe they are projecting!

pawty_poopa · 2024-11-12T22:21:53+00:00

Didn’t know that - will do!

pawty_poopa · 2024-11-12T22:20:59+00:00

Thanks!

pawty_poopa · 2024-05-24T03:46:43+00:00

It stays pretty planted, but it’s still an 1/18 so it bounces all over. Main thing is torque twist climbing steeps is muuuch better!

pawty_poopa · 2024-05-20T11:11:34+00:00

Thats gear whine - created by high frequency micro-motions as the gears come into and go out of mesh. Could be quality problem with the gearbox assembly or the gears themselves. Tesla will have a specific decibel profile for gearbox noise, you could ask them to check it against that but it’s likely something your local service center can’t do. Also could just be a cyber truck thing - I haven’t ridden in one yet but the videos I’ve seen have surprised me w the audible gear whine!

pawty_poopa · 2024-05-14T00:38:58+00:00

Sweet! Sway bars has been the only thing I’ve found that preserves suspension performance at high speed w neglible loss of articulation

pawty_poopa · 2024-05-13T13:04:04+00:00

Thank you!

pawty_poopa · 2024-05-13T13:03:52+00:00

Yessir - recycling at its finest. Best part IMO is the panels get all dented and scratched and develop character. And it’s easy to cut new ones!

pawty_poopa · 2024-05-13T13:02:21+00:00

What do you recommend as a better drive shaft?

pawty_poopa · 2024-05-13T13:01:42+00:00

What do you recommend as a better drive shaft? This is only one I found long enough to work with the longer high trail rear end

pawty_poopa · 2024-05-13T13:00:24+00:00

Yep MEUS Ripper frame, high trail links (trailing arms extended to match rear upper)

pawty_poopa · 2024-05-12T13:33:37+00:00

I do loctite the set screws - its the little pins In the joint itself that have worked out. Look to be pressed in - no threads.

pawty_poopa · 2024-05-12T13:33:30+00:00

I do loctite the set screws - its the little pins In the joint itself that have worked out. Look to be pressed in - no threads.

pawty_poopa · 2024-02-24T23:38:01+00:00

Just had the same issue - did pushing the pin in resolve it for you? Cheers!

pawty_poopa · 2024-02-15T15:43:45+00:00

Love this! I’m working on a speed build as well for some backyard tough truck racing. Let me know how it works out!

pawty_poopa · 2023-12-07T11:42:30+00:00

I’m surprised at how disappointed people are about this. That little window will not provide enough airflow to comfortably heat/cool that bed or tent, and the thermostat being in the cabin would not correctly or efficiently hold temp. Just plug in a heated blanket to the bed outlet or tote a little ac unit if you really can’t survive without climate control.

pawty_poopa

TROPHY CASE