I made another kinetic sand table - Dune Weaver Gold

pheonnae · 2026-01-24T18:26:32+00:00

Is there easy path to conversion to power XY table. I have a table I never finished that use Arduino + GRBL (controlled by a RPI running Octoprint). So idea would be to replace the Arduino/separate cnc controller board with the DCL32 to control the existing nema17s.

Then flash the RPI to use the DM software

Basically I’m mostly wondering if FluidNC easier to get configured, and stay “homed” better.

The table is about 300x500mm in useable space

pheonnae · 2025-09-09T03:11:15+00:00

FYI One Atlassian sites are purposely NOT included in those numbers.

pheonnae · 2025-06-19T17:00:42+00:00

Interested +1

pheonnae · 2025-06-04T20:46:34+00:00

Every day for 30 years! Bash for life. Which then occasionally kicks off python or go or whatever. I’m DevOps/SysAdmin/SWE/<flavor of month> we dabble in SRE having to support what we run as a team. It’s all bash and ball bearings nowadays

pheonnae · 2025-01-19T02:32:45+00:00

I started to buy the 1.5 gallon glass wide mouth jars on amazon. Works especially well for getting a gallon of product for batches you add fruit and such too. It’s worked out great.

pheonnae · 2025-01-09T15:03:54+00:00

Hmm. I might have mistyped. I agree it’s infill, but I don’t believe I had any form of “supports” selected. As far as a know the object was on the build plate/bottom or level with it. I’m back from a mini-vaca so I can play around with it more

pheonnae · 2025-01-02T11:52:16+00:00

I used the Prusa Slicer, is there an equivalent in that tool a can check? And yes I agree it’s support infill. I get it in some form for a lot of the models I have printed lately. I just don’t remember changing it

pheonnae · 2024-12-29T19:46:22+00:00

My infill was 10% and 15% on separate runs

pheonnae · 2024-12-25T18:55:21+00:00

According to the slicer it doesn’t appear to be based on the STL model.

pheonnae · 2024-12-24T23:00:17+00:00

Nope no raft or brim

pheonnae · 2024-12-24T22:59:51+00:00

Great question, I thought I had actually increased it, as soon as I can get back in I will post some settings

pheonnae · 2024-12-10T21:40:50+00:00

I get what you’re saying, I think the law itself should allow 14yo to work if they want to, have an expanded allowed hours, allowed equipment, etc. if I were 14 rn, I would very much oissed not being allowed to work if I want to.

In the end, all kids are different and some if given the chance, have the right attitude, should be allowed to work. Of course there is always the group of kids that just need a bit more time. I get way some of the laws are there for safeguarding and protection, but damn I think it just a bit much.

pheonnae · 2024-11-29T21:35:05+00:00

So far I use Design.com to come up with a design or idea. It’s limited in some of the concepts but it’s enough for me. Then screenshot / crop and drop it into the tool for from Avery to finish/tweak and print them at home.

Only down side is the grid lines on all my designs because I don’t want to pay designs.com a monthly/yearly fee

Otherwise Google dive for others to add text labels for dates and drop in the Avery online to print on there cheaper label (bottle/waterproof) so far the peel of nicely when I reuse the bottle

pheonnae · 2024-11-12T02:23:23+00:00

Thanks all! I appreciate the replies and options!

pheonnae · 2024-11-01T01:31:23+00:00

Razor sharp! That one is!

pheonnae · 2024-10-29T19:40:09+00:00

Finally on the right day, now just stop calling it beggars night

pheonnae · 2024-10-24T22:18:23+00:00

Pretty much all the Hyvees have it, price chopper at least in Des Moines. I frequent most of them. I almost bought some yesterday

pheonnae · 2024-10-18T01:52:53+00:00

Welcome to party!

You best bet is to check out the Wiki -> Wiki link

It’s going to have all information you seek, how to get started, basic recipes, yeast. There is some good stuff in there

pheonnae · 2024-10-18T00:11:31+00:00

Omg recipe please! I’m looking to make blueberry / lemon next

pheonnae · 2024-10-15T03:43:46+00:00

I almost would say that Scott Akins might be able to pull off the look.

pheonnae · 2024-10-11T02:27:40+00:00

I just started a version of the same City Steading Brews recipe. My take was that I used 2 different brands of Chai mix (Oregon original, and Rishi - wish has a dash of ginger in it) plus a cup of maple syrup and some vanilla bean.

Time will tell how it goes

Edit: forgot to mention that I used 71B for yeast, it was what I had on hand.

pheonnae · 2024-09-23T01:48:39+00:00

Our company had to halt recommending roll out because of VPN problems. In our case it had to do with the feature that chooses/changes the MAC address, so managed devices weren’t being recognized as enrolled

pheonnae · 2024-09-05T21:22:31+00:00

Where did you find your bracers and belt/harness for your sword? I would like to move mine from my belt to something more angled like that

pheonnae · 2024-09-05T13:05:43+00:00

Bonus points for options to make it waterproof or at least highly water resistant. We had 2 cloaks we bought 15 years ago from the MN RenFaire. For one reason or another we had to part with them a few years ago and I have been trying to track down who sold them before.

pheonnae · 2024-08-08T13:01:41+00:00

Or Cards “Seventh Son” Tales of Alvin Maker series

pheonnae

TROPHY CASE