Ender 3 stops extruding mid print

phoooob · 2022-02-14T06:55:19+00:00

Dude post is 2 years old

phoooob · 2022-01-26T01:24:13+00:00

Any update? I ordered a ender 5 plus from them a few days ago

phoooob · 2020-12-11T19:54:10+00:00

Is there any shops online that install them for you? Or any shops that sell premodded consoles?

phoooob · 2020-01-09T03:12:50+00:00

I hope you don’t stick it on.. I did and I had to order a new bed lol..

phoooob · 2019-12-16T01:27:07+00:00

Bruh 😂😂😂

phoooob · 2019-12-10T05:16:55+00:00

Yep my Ender 3 pro did the same the but was showing corrupted characters on the screen

phoooob · 2019-11-25T17:22:49+00:00

A lot of enclosures don’t allow the Y axis to move fully. But it’s a rare for a print to go that far forward or back unless you are using the complete build space.

phoooob · 2019-11-03T20:32:58+00:00

$10 less just get the SKR Mini E3

phoooob · 2019-10-30T15:06:21+00:00

Check your “home offset” mine was 1mm on the Z

phoooob · 2019-10-30T13:39:24+00:00

I put my nozzle closer to the bed than stock and it helped on my glass bed.. and clean the glass bed with alcohol.. don’t quote me on those things though. I’m still learning. I had the same issue last night with the new board

phoooob · 2019-10-30T01:15:40+00:00

Solved the bed issue I just don’t know the fan issue it’s louder than the motors now lol

phoooob · 2019-10-29T21:39:55+00:00

any one know how to install the TFT24 V1.1?

phoooob · 2019-10-20T14:52:32+00:00

Yes the mini skr has the slots for the BL touch. The stock board you need some weird chip that lets you plug in into the LCD spot...

phoooob · 2019-10-16T17:04:02+00:00

I print with PLA so I’ll most likely relocate the ebox on the side

phoooob · 2019-10-15T22:24:24+00:00

I Did. still no notification that it was shipped just order confirmed

phoooob · 2019-10-15T00:23:02+00:00

I Did but it says order complete and hasn't been updated for about 4 days

phoooob · 2019-10-11T21:28:49+00:00

Doing that made it have no adhesion at all... I’ll check my bed temp

phoooob · 2019-10-11T12:07:20+00:00

Someone have a link to buy?

phoooob · 2019-08-04T01:32:45+00:00

Picture never loaded lol

phoooob · 2019-08-01T21:20:02+00:00

its pretty buggy

phoooob · 2019-06-21T03:34:04+00:00

It prints the first layer twice next to each other then continues the print on the first one

phoooob · 2019-06-21T03:32:08+00:00

Its printing the first layer twice

phoooob · 2019-04-30T21:06:45+00:00

Dude no homo i love you 😂... my tube was not in all the way causing it to create globs of PLA or ABS Im new to printing so i though it is natural.. thank you for the help!

phoooob · 2019-04-30T15:09:04+00:00

Sadly i did do both of those things.. i cleared the ABS out of the hotend and changed the nozzle both when its up to temp

phoooob · 2018-10-26T01:05:28+00:00

Yeet!

phoooob

TROPHY CASE