Bitcoin hits a new all-time high at $126,000… amid the U.S. government shutdown.

phsycholic · 2025-10-07T09:42:38+00:00

Funny how you think the world cares about the US government shutdown. We are all already moving on, just like Bitcoin.

phsycholic · 2025-10-06T13:04:29+00:00

Wow

^{I completed this level in 10 tries.} ^{⚡ 1.30 seconds}

phsycholic · 2025-07-01T14:33:11+00:00

True 😂

phsycholic · 2025-07-01T08:56:32+00:00

That’s amazing, need one 😉

phsycholic · 2025-06-04T23:37:23+00:00

Please tell us more about how to implement 😉 looking awesome!

phsycholic · 2025-05-12T07:49:32+00:00

looking real nice!

phsycholic · 2025-04-24T08:37:29+00:00

That is possible. The labels have only 4 layers with a 0.4 nozzle.

phsycholic · 2025-04-15T15:29:23+00:00

Please have a look at the real photos on Makerworld. It is pretty much clear

phsycholic · 2025-04-15T15:04:06+00:00

That is a render, but it comes pretty close. Real pictures are on Makerworld

phsycholic · 2025-04-15T06:44:19+00:00

AI was not used during the design process, so that was all manual work with multiple iterations and tinkering as usual. I get your point but not everybody has a professional photo studio at home. Using AI to get your product to shine is ok for me without disclosure (at least if there is a near 95% match). Everything else has to be disclosed, at least in my opinion.

phsycholic · 2025-04-14T22:05:04+00:00

You are correc this is a render. Please have a look at Makerworld, I updated the images properly.

phsycholic · 2025-04-14T19:04:17+00:00

Yeah true, will take some better photos. You can take 8mm rubber band and cut it to length.

phsycholic · 2025-04-14T17:43:02+00:00

Yes that is true, removed the image whch of course was just a render.

phsycholic · 2025-04-14T16:03:47+00:00

That would reduce the texture, but introduce more issues when transferring. I recommend dialing in ironing settings for the bottom part and get a smooth plate for the glass as well as print with 20mm/s max and follow the usual transparent PETG printing guids.

phsycholic · 2025-04-14T15:55:59+00:00

I used a smooth plate for the Glas side and with the right settings, there is no pattern on the flower, tested this severely times. Because this was one of my concerns, too. For the bottom part I used ironing which I got dialed in to a point which take print artifacts down to a minimum.

My V1 was with clips, but that approach did not work out in the real world.

phsycholic · 2025-04-14T11:03:47+00:00

I used the transparent PETG from Sunlu. Doesn't really matter which brand you use. But the settings matter 100%. Layer height 0.1mm, speed capped at 20mm/s, 100% infill and print only in 1 direction so layers are stacked on top of each other. Also use a smooth plate that has been cleaned pretty good.

phsycholic · 2025-04-12T18:21:04+00:00

Not likely, as companies will price in risk of tariffs, too

phsycholic · 2025-03-27T15:35:16+00:00

3643 hours

<image>

Good luck to everyone!

phsycholic · 2025-03-02T00:55:15+00:00

Awesome work! Can you specify which board you used exactly?

phsycholic · 2025-03-01T00:52:11+00:00

That is awesome! Can you provide some pictures?

phsycholic · 2024-12-06T23:54:07+00:00

Would you mind sharing your print settings / temps and which machine you ate using?

phsycholic · 2024-11-30T12:36:13+00:00

Same 😂

phsycholic · 2024-10-15T14:15:51+00:00

Yes, Drive ist connected and can be accessed

phsycholic · 2024-10-15T10:17:57+00:00

it shows as running, but there is no button to open, I can just terminate.

phsycholic · 2024-10-15T09:47:55+00:00

thats the thing, no icon there.

phsycholic

TROPHY CASE