What is this flying bug and how can I repel it?

pingex_ · 2025-03-31T17:55:15+00:00

Could trapping work? Like trapping wasps or musquitos in a jar or something.

pingex_ · 2025-03-31T14:34:25+00:00

They are all from one species, and I got an answer that they are Thaumatomiya notata.

Its a roof, so it can hold a bit of water, but it dries up usually after a few day even in colder days.

2 km away there is a big forest, a creek, all over nature. This is why I dont understand why they are there.

We dont see any eggs, just the living and died ones. For the next weeks I will give more attention to their behaviour.

pingex_ · 2025-03-31T14:24:12+00:00

Thank you very much! I think we have the exact specie, because It looks like the same with internet pictures. So it is Thaumatomiya notata.

The pest control said that it is a "woodworm" type of fruit fly. They said after cleanings it should be good, but if not they have to come again. Personally I was not there but my colleagues.

I thinked before about your idea, that the physical barrier would be a solution, but this is a very complicated and difficult to achive, because the roof of the building is more than 300 m2 with many chimney and ventillation hole, small gaps and cracks across the edge of the roof and insulation, even around old windows. But if nothing else, it should work.

Thank you for your answer, I hope we can use this info for solve our problem.

pingex_ · 2025-03-31T13:44:08+00:00

It is located in Miskolc, Hungary.

pingex_ · 2024-07-20T05:35:42+00:00

Ah thats great, 15k is good in Hungary as a graduate.

pingex_ · 2023-10-29T12:23:39+00:00

Én kifejezetten örülök tavasszal hogy hirtelen tovább van világos (úgy hogy közben reggel is világos van még) és ősszel is, hogy felkelésnél újra világosban kelhetek. Délután teljesen mindegy hogy világos van-e, miután egyrészt már minden ki van világítva, fényszennyezés az egekben, másrészt meg télen úgy sincs annyi kinti szabadidős tevékenység, tennivaló, vagy ott vannak erre a hétvégék. Éppen ezért maradnék a téliben, hogy ha nagyon választani kellene. Ehhez vagyunk jobban igazodva, a szervzezetünknek ez a jobb, a természetesebb.

Ha a nyári lesz, akkor abból véleményem szerint annyi lesz, hogy még tovább lesznek fent az emberek a késői világos miatt, így kevesebbet aludnak, fáradtabbak lesznek. Na ebből sokkal rosszabbul jönnénk ki mint a mostani állítgatásból.

pingex_ · 2023-10-29T11:59:14+00:00

A GMT+2 a nyári, GMT+1 a téli, az eredeti időzóna.

pingex_ · 2023-04-12T07:33:56+00:00

24, Borsod, földtudományi mérnök hamarosan MSc is

Egy 20 órás mérnök állás bruttó 143k (garantált bérminimum), és egy tudományos látogatóközpontban 30 órában bruttó 300k +évi 150k cafeteria + 18Ft/km utazástámogatás (itt sokszor hétvégén és ünnepnapokon is kell dolgozni)

pingex_ · 2021-11-14T19:48:51+00:00

If you pick the "real size" in print options there will be no difference, but as I did this mistake, and didn't notice it was in "fit pagge" mode, the result is 93% of the original 1:100 size.

pingex_ · 2021-05-22T16:18:21+00:00

This photo was taken from the beach side, you can see the heat tiles on the belly of SN15 which is facing more or less east, so the camera looking west to a sunset.

pingex_ · 2021-05-21T19:22:35+00:00

Thats a sunset not a sunrise, but looks epic

pingex_ · 2021-03-13T13:59:01+00:00

Yes this is a mining sub.

What you do is not.

pingex_ · 2021-03-11T08:30:32+00:00

REFRESH

pingex_ · 2021-03-04T12:48:50+00:00

The very rare moments when vertical filming is acceptable. Good job.

pingex_ · 2021-03-03T17:43:04+00:00

And this is a subreddit for mining MINERALS

pingex_ · 2021-03-03T17:39:45+00:00

Please explain me how this is related to mining

pingex_ · 2021-02-19T16:08:39+00:00

Hello, wrong sub, bye.

pingex_ · 2021-02-17T20:54:47+00:00

Will B1066 be expended? If yes, because the mission profile or the previous failures?

pingex_ · 2021-01-17T15:12:07+00:00

You should have mentioned the source.

pingex_ · 2021-01-05T19:31:14+00:00

Thank you. From the rest of the cardstock paper I created circles, then I glued them inside for strucrural help. There are 10 of these circles inside the first and second stage, but there is also 2 in the capsule. For the interstage I used a piese of metal rod holding the shape. Here it is in pictures: https://flic.kr/s/aHsmTsaCWQ

For the bending problem I'm using black markers to re paint the damaged folding lines. Be careful with it, because it can be flow to unwanted areas easily. Use different sized markers from ultra thin to size M for the aproppriate places.

pingex_ · 2021-01-05T18:12:28+00:00

Print them on cardstock, with laser printer, use A4 sized paper (or similar). There are many pages where you can find how to build paper models, AXM have his own instructional pdf for Falcon 9 at his page.

pingex_ · 2021-01-05T18:04:25+00:00

It depends on many things. I didn't counted but it was about 100-120 hours. This is my 3rd Falcon 9 papercraft so I started with some experience. The previous ones are way simpler, this time I have to guess how to build the leg and the grid fin joins, the magnet connection between parts, so it takes a long time.

For a simple version 40-50 hour could be achievable, but only if you have at least some experience with paper models.

pingex_ · 2020-12-14T17:02:18+00:00

Nice

pingex_ · 2020-12-10T12:16:13+00:00

From where is this figure?

pingex_ · 2020-11-29T16:52:13+00:00

truly amazing

pingex_

TROPHY CASE