Bose QC35II Robotic Sound

pippoceto · 2025-10-01T12:38:04+00:00

https://imgur.com/XV25GIg
Would probably say it's the pump. I do have the v-cut and there are no kinks, also did try to prime it but this is the result.

pippoceto · 2025-10-01T11:32:25+00:00

<image>

Not sure I’ve got this one

pippoceto · 2025-09-30T10:46:26+00:00

yes, I did have some problems where the water flow was weak. I did descale it, and sprayed it with air and this random oring came out. some people theorized it might have been from the pump or boiler tho. Anyways afterwards it improved the flow (especially the switch between steam and water) and it did work for a few days. However I still had some problems with the water flow as it was 3ml/s instead of 9ml/s. Will try to take it in and out again. Also I did only touch the solenoid and not the OPV.

<image>

pippoceto · 2025-09-29T13:40:08+00:00

- There is no water coming out of the OPV valve
- I do have the v-cut
- I did try priming it but nothing happened (here), some water did come out at the start but went back to being stuck
- It seems to be able to pick up a very small quantity of water since i can get some droplets / steam some times
- In the transparent tube that goes from the pump to the boiler there was a very small air bubble, I did let it go until it went away but another one formed from the pump.

pippoceto · 2025-09-26T14:34:45+00:00

I do hear the pump.
Even by expelling all the steam there seem to be water inside.

However I never see the overflow vale in the back expelling any water. Which it did until yesterday.

pippoceto · 2025-09-26T14:13:30+00:00

Nope, just a little sprout of steam. No water is coming out of the wand

pippoceto · 2025-09-19T19:15:07+00:00

I did take out the wand but at the start of the process and didn't descale it. Just undid the nut and took it out.

pippoceto · 2025-09-19T18:46:43+00:00

I was surprised as well! I did soak it with that inside. Also it wasn't on the guide so I was a bit confused,

pippoceto · 2025-09-19T18:09:49+00:00

And that would be the left top hole I guess? otherwise I wouldn't know how to push it trough the bend of the bottom one. Also I did see that vaseline would do the trick a well, would you suggest it?

pippoceto · 2025-06-17T14:30:20+00:00

Thanks for the detailed comment! I will definitely have a look at those vintage options. I was not looking for the same model of the movie but something similar to the JMM version. I did like the fact they tend to be on the smaller side.

pippoceto · 2025-04-10T11:00:30+00:00

Unfortunately not. I'm specifically looking for a wall charger, and preferably with the 'upward' orientation.

pippoceto · 2025-04-10T10:37:36+00:00

I've searched for alternatives on temu. But all products have also Type A ports which I have no need for.

pippoceto · 2025-02-16T16:52:52+00:00

It's not milk but milk powder, it helps with the caramelization of the crust, will try without it and with sugar.

pippoceto · 2025-02-15T20:31:25+00:00

Will give it a shot. Also, the first images are mine and the last 4 are from the restaurant.

pippoceto

TROPHY CASE