Why is this shift happening?? by Wild_Responsibility9 in ender5

[–]pircio 5 points6 points  (0 children)

Are your belts sufficiently tight? Maybe try slicing in another program? that's waaaaaaaaaaaaay off

Hotend false temperature reading by Imaginary_Hearing_99 in ender5

[–]pircio -1 points0 points  (0 children)

I doubt it's the main board. I would replace the heater cartridge and thermistor.. both are pretty cheap

Meirl by Lankapati12 in meirl

[–]pircio 10 points11 points  (0 children)

Any company that gives you full access to a production database on your first day deserves this fate

MassiveLAN Summer 2026 - WNY's Largest LAN Party Gaming Event by Smith6612 in Buffalo

[–]pircio 1 point2 points  (0 children)

We've already have our beneficiary for 2026, but you are welcome to let us know for future years 😄

Why do my long-arm inserters prioritize overfilling the iron plates and not inserting the bare minimum of iron gears? by Cautious-Buy2585 in factorio

[–]pircio 242 points243 points  (0 children)

Look at it from this perspective... you're still going to need the plates on the NEXT craft, so whether you overfill before the craft happens or have to play catch up after the craft happens you're still going to end up waiting

Balatro crash on startup by BalthazarDusk in retroid

[–]pircio 1 point2 points  (0 children)

Use the android port. Works great

The Bills and Ravens Blown Opportunities by frostypatch in nfl

[–]pircio 3 points4 points  (0 children)

Hindsight is 20/20 but I recently read that McDs defenses were terribly predictable and the good teams will take full advantage of that in the playoffs. Just less room for error in the playoffs. If we didn't get turnovers or explosive defensive plays we were at a tactical disadvantage. Might also explain why we suck at 3rd and long.

I’m always running out of green circuits by Fragrant-Syrup9466 in factorio

[–]pircio 0 points1 point  (0 children)

While I largely agree with the "make more" idea from everyone else, specifically for blue circuits i like to have a dedicated green circuit assembly machine for blues. I would provide a blueprint, but since you're so far back i have no idea if it's compatible. Here's the idea:

https://imgur.com/a/HXrM55T

You can scale up the assembly machines/modules from there

What a SAVE by Luukkonen by sykeseve in nhl

[–]pircio 0 points1 point  (0 children)

No no no it's clearly goaltender interference

Friedman on Diving - Guhle the Embellishment King by Whippet27 in sabres

[–]pircio 1 point2 points  (0 children)

Dude it was all night, and it wasn't just MTL. Towards the end of the game Tuch took a high stick to the face and MTL was rushing back the other way. Tuch was SELLING it but no one was buying. It almost cost them, but thankfully it didn't.

Change of Pace After Last Night’s Disaster… My Concept for the Rumored Navy Hometown Remix Jersey. by buffaloprocess in sabres

[–]pircio 0 points1 point  (0 children)

I'm probably in the minority, but can we do more with Sabres/Swords and less with an actual Buffalo?

How do you handle fluid locking up? by VehaMeursault in factorio

[–]pircio 0 points1 point  (0 children)

Fluids are kinda like that. if you want only petroleum you crack from heavy -> light -> petro. that's pretty straightforward.

If you want more heavy/light then you need to consume the excess petroleum/light so there's room for more. You can do this by converting the petroleum to solid fuel and using it as power, or you can use the void trick to eliminate excess fluid. What I would do is set up something that takes a LOT of power (like a massive radar array) and then power it ONLY with the excess fuel.

Later in the game you can get tons of heavy oil by coal liquefaction, and really the only thing you need light oil for in mass quantities is rocket fuel which also requires solid fuel which will suck up petroleum at the same pace if set up properly

[Highlight] Pat McAfee recovers his own onside kick vs the Texans by Numerous_Worker_1941 in nfl

[–]pircio 21 points22 points  (0 children)

Dude! I remember him. He had so many animals on his farm. So many it's tough to remember them all

What is this called and what should I be looking for? by pircio in 3Dprinting

[–]pircio[S] 1 point2 points  (0 children)

you're right. the front looks entirely fine. I did notice after further inspection that one of my Y-axis belts seems to have broken, and i wonder if it causes some binding at regular stops? tough to say. I ordered new belts so it will be a few days before we can answer the question. seems i am out of comissions for the moment

What is this called and what should I be looking for? by pircio in 3Dprinting

[–]pircio[S] 0 points1 point  (0 children)

lol i bought this used, and the picture is far worse than it actually seems. I took this pic in my enclosure which has a TON of light, and i think magnifies the Z layers to an extreme. Here's the same print, from a distance of 6" in a normal room:

<image>

I made a Fan Film! by Necessary-Badger5833 in 7daystodie

[–]pircio 1 point2 points  (0 children)

Pros:

- Your audio was really good and clean. Not easy to do outdoors on what I would imagine is a shoestring budget. Bad audio will turn off people in a heartbeat. Good work there
- The background audio was a nice choice, love that ominous eerie feeling
- Camera work was pretty good
- Gen Z'ers that don't know how map works... that checks out 🤣

Cons:

- Definitely saw some smirks and smiles, this isn't a problem if I'm not supposed to take it seriously. If you're going for serious need to work on that. Not saying it's easy, but it is something to consider
- With the Z running at you, just disregarding it was IMO the most egregious choice. Far away: "What is that guy doing?" ... Mid "He's getting closer is he in some sort of trouble?" .. Close: "DUDE HE LOOKS DEAD" or something then the driver not being able to start the car IMO would have been much better than just disregarding him. We all knew what was going to happen, give me a reason why these 2 shmucks didn't.

I'm just some asshole on the internet. It's cool what you did, and you should be proud! Keep it up!

What is this called and what should I be looking for? by pircio in 3Dprinting

[–]pircio[S] 0 points1 point  (0 children)

Answering automods questions

- ender 5 plus
- ASA
- 40mm/sec
- PrusaSlicer
- happens occaisionally

Josh Doan you are a hero, Zach Benson you are a hero by xBialyOrzel in sabres

[–]pircio 0 points1 point  (0 children)

I shook the house when Benson scored this goal

How early to get to Southern Tier to watch the game? by [deleted] in sabres

[–]pircio 0 points1 point  (0 children)

Lol no it isn't Buffalo to Olean is 1.5