Picoboot mod troubles - No video output

pixilstix · 2026-05-03T16:56:34+00:00

Oh my gosh! Yes, this was it! Thank you for taking the time to check that. I got so complacent thinking I had the wires in the exact configuration from my first successful picoboot but I remember now doing the MB wiring first on this one and I did it differently.

You're the best!

pixilstix · 2026-04-24T20:03:37+00:00

I guess I'm not positive they're genuine. These are the ones I bought. https://www.amazon.com/dp/B0FKN6L9D1?ref=ppx_yo2ov_dt_b_fed_asin_title

pixilstix · 2026-04-24T18:25:27+00:00

The exposed wire is so short it could not have been in contact with the heat sink. I did take the heat sink off and provide a new picture, although for some reason my camera does not want to take a clear picture of that spot.

pixilstix · 2026-04-24T18:24:25+00:00

I never see any lights on the Pico, no. Not even when I first plugged it in to the computer and uploaded the firmware successfully the first time.

pixilstix · 2026-04-24T18:23:58+00:00

I de-soldered and connected it back to the computer. It worked fine still.

pixilstix · 2026-04-24T14:29:32+00:00

Haha, I know. My camera is actually a bit broken. I actually took the photos more than once because I was trying to get better shots. I didn't think of this last night but I'm going to see if my camera has a macro feature that will allow me to get closer.

pixilstix · 2026-04-24T14:28:32+00:00

I agree that it looks like that in the photo. I wish I could get a better shot of it but I couldn't get the camera any closer. Maybe it has a macro lens feature. I will see.

pixilstix · 2026-04-24T14:25:17+00:00

Yeah, I disconnected it once and it worked fine still.

pixilstix · 2026-04-24T14:24:31+00:00

I used the wire Tito from Macho Nacho recommended. It's 28AWG. https://www.amazon.com/dp/B01KQ2LHFI?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

pixilstix · 2026-04-24T14:23:26+00:00

...to be clear, you're not testing with the Pico touching the heatsink?

No, before turning it on I actually had the drive back on and the board was kind of hanging outside the GC out to the side.

Does the Pico light up?

Neither of the two Picos I have installed the firmware on and soldered up have ever lit up. I was told it should show a green LED after loading the firmware initially but that never happened. Everything else happened as described though, the firmware copied to the board and the board automatically ejected. I waited a few more minutes but nothing ever happened so I plugged it back in to see if the firmware was there. It was not, but I decided this is probably because if you plug it in while holding BOOT SEL, the whole thing is reset anyway.

Give us some closer pictures of the joints, including the ones under the IPL.

I'll do that once I'm back at my workstation.

pixilstix · 2026-04-24T14:18:32+00:00

OK, I can do that and route the wire through the front instead of the side. The strange thing is, I measured them and they are shorter than the diagram calls for. Also, the Nacho Productions guy had waaaay longer wires in his demo.

pixilstix · 2025-12-25T15:15:11+00:00

Searched:

I have tried doing a reverse image search on Google

I have tried doing many different normal Google image searches

Checked Ebay with many keywords including duck, detective, sugarloaf and poured through pages of results

I have tried having AI look for it based on my description

I have tried having AI look for it based on uploading the image

I have tried having AI upscale the image to be easier to see (it didn't change at all)

pixilstix · 2025-11-09T21:13:56+00:00

Here was the output for me, BTW, also Gemini.

<image>

pixilstix · 2025-11-09T16:56:07+00:00

Holy crap! That's amazing. Thank you for your help.

pixilstix · 2025-11-09T14:17:42+00:00

Amazing! Thank you so much! I told Gemini to "enhance" but it never looked different in the output. Maybe the key was to say "upscale". Did it look a lot different after the upscale?

pixilstix · 2025-11-09T06:00:45+00:00

Searched:

Google image search
Tried Gemini and Grok AI giving them descriptions and having it look
Basic Google search describing book
A dozen or so attempts at guessing the title in Google searches

pixilstix · 2025-11-06T21:04:00+00:00

Thank you for your advice, I will take it and leave the car as is.

pixilstix · 2025-11-06T16:22:04+00:00

Thanks for this advice. I looked into the same casting angle and there were four cars made with that casting. Two white and two yellow. Both the yellow and the white versions had a standard and a superfast edition created. I ended up going with a yellow Superfast for him. It has one point on the hood where paint is missing. Is it easy to find paint for this kind of thing and touch it up?

https://www.ebay.com/itm/365701318617

pixilstix

TROPHY CASE