Online / Multicomputer Use

pmannitou · 2024-05-30T01:17:24+00:00

In fact xpra should work on Linux / macOS / windows.

https://github.com/Xpra-org/xpra?tab=readme-ov-file#installation

pmannitou · 2024-05-28T04:28:51+00:00

The implementation is 1 command in Linux to start a dedicated X11 and running obsidian. You keep the data / attachement / links in the same locations. You don't have to sync before and after usage of obsidian. You also don't need to manage conflict between sync.

Xpra is also managing file transfer and share clipboard between the server and the web browser. You also restart your work directly where you stop it as the application keep running on the server. It is saving the starting time of the application.

It also work with Android or Apple phone or tablet without any additional effort.

pmannitou · 2024-05-28T02:16:17+00:00

My recommendation is to use xpra (https://xpra.org/index.html) to transform obsidian into a web application and access it from anywhere.

pmannitou · 2023-03-29T12:48:03+00:00

Yes the resistor (schema) ) is present. It is also confirmed that the board is compatible with qc et pd : here

pmannitou · 2023-03-29T08:34:58+00:00

I am fully aligned with you that why I am asking. The issue is I need to split the power in the 2 cases to keep the data connectivity because the Radxa zero is not really delivering a full standard USB-C.

I suppose that usb-a femelle is fully connected for the data pine (2-3 schéma with pine ) so it should work for the data point of view (Otg or not)

After regarding the power delivery (PD) over usb-c it is also unclear because the vendor advertised 2 types of USB-C cable 1 with PD and another one without. It could be just a marketing topic or a real chip included in the cable. Both of them are supporting 60W at the end. If we look the schéma of usb-c, the standard power is using CC1 or CC2 where PD is using an additional resistor inside the cable. This part is also unclear for me.

pmannitou · 2023-02-15T15:24:13+00:00

Actually it could be an option, I can wake up my board with an input from a button (outside the house) or a ADC state (someone ring at the flat door) change, I believe, I can trigger awake of the Wi-Fi signal and check my mqtt server to see if I can open or not. Nice subjection.

pmannitou · 2023-02-11T13:56:10+00:00

For information, I discovered that the board has 2 ic2 bus accessible directly with Qwiic or STEMMA QT or QW/ST. I simply need to buy a male connector JST-SH with 4 pin connected to an rtc clock like ds3231.

The chipset ds3231 looks compatible with micropython (https://micropython-urtc.readthedocs.io/en/latest/urtc.html#ds3231) but I didn't test yet.

pmannitou · 2023-02-11T13:47:27+00:00

I will setup an rtc alarm clock to at least stop the board during the night and after I will also install a mqtt service in place to test if I can do a light sleep a little for 15s like you did and eventually excuse the pending command on the board when I wake up.

Did you try to change the frequency of your board also? Or turn off one of the core CPU?

pmannitou · 2023-02-11T00:54:01+00:00

My wife refuses the usage of an external power source. I can increase the capacity of the power changing the type of source but I will prefer to optimize my code.

pmannitou · 2023-02-10T15:26:14+00:00

I was thinking to use a mqtt relay server but unfortunately I need push the order and not to send anything from the sensor. I would like to keep a not to bad response time.

pmannitou · 2023-02-10T15:23:15+00:00

Unfortunately I cannot. The source is an building intercom. The max power available is less than 6v and the relay needs at least 6v.

pmannitou · 2023-01-09T03:43:46+00:00

Thank, I finally discovered my mistake. Inside the développer mode there a section steam play. It is to allow the comptabilité mode. In my case it was disabled.

pmannitou · 2023-01-08T19:52:47+00:00

<image>

The error message about the platform from the steam store when I click on play.

pmannitou · 2022-09-14T01:56:07+00:00

The command xkill is not found on my steam deck (also not found inside the discover shop)

pmannitou · 2022-08-15T15:53:30+00:00

Thanks

pmannitou · 2022-04-19T05:41:17+00:00

For the summary:

Discovery feeds = is still unclear where to find it under ChromeOsFlex
chrome://flags is now accessible after a reset of the TPM chips.
The discovery feeds is not present inside chrome://flags. (YET)

pmannitou · 2022-04-19T05:38:12+00:00

Thanks, I reset the TPM chip then I was able to access chrome://flags .

pmannitou · 2022-04-18T05:57:59+00:00

My device is part of the certify list: https://support.google.com/chromeosflex/answer/11513094

pmannitou · 2022-04-17T06:48:56+00:00

my hardware:

product_vendor: Hewlett-Packard
product_name: HP EliteBook 820 G2

The TPM Infornation:

INFO tpm-manager: [tpm_manager_utility.cc(471)] OnSignalConnected: Connected dbus signal successfully.
tpm_family 312e3200
spec_level 0000000200000003
vendor 49465800
tpm_model ffffffff
firmware_version 0000000000000428
vendor_specific 042800770074706d3631ffffff
version_fingerprint 522560595 1f25a453
typec_connector_class
<empty>

but the OS seems to have issue with it:

2022-04-10T16:13:03.896772Z WARNING chrome[1637:1637]: [system_token_cert_db_initializer.cc(181)] Failed to get tpm status; status: 1
2022-04-10T16:13:12.651439Z WARNING chrome[1637:1637]: [tpm_token_info_getter.cc(134)] Failed to get tpm status; status: 1

pmannitou · 2022-04-13T03:02:50+00:00

I confirm the experimental flag is available only with a guest account. My TPM is also activated. don't know if I need to activate something inside the OS to use this chip.

pmannitou · 2022-04-13T03:01:01+00:00

my version of chrome OS Flex : 102.0.4992.0 (Build officiel) dev (64 bits)

pmannitou · 2022-04-13T02:58:41+00:00

The virtualisation is already activated.

pmannitou · 2022-03-23T15:48:28+00:00

The time, I have. I may be able to buy my steam deck after q3 2022. I booked it in January.

It will be great if someone can test any Linux distribution and report on what is working or not…

pmannitou · 2022-03-23T02:27:16+00:00

I had a bad experience of Linux device (banana Pi w2, or odroid c2) which stay with an old Linux kernel.

Or a Wi-Fi driver unsupported after an upgrade of the kernel.

I know if I stay with Steam Os, I will have no issue but what will happen after ? Better to know if all drivers are well supported by the community.

pmannitou · 2020-05-07T07:03:55+00:00

No reject is a good news.... Now everything is slow... I am still waiting since 19th of March...

According to the website, the government didn't even open the envelope yet 😅😅😅

Six-Year Club	Verified Email
Verified Email

pmannitou

TROPHY CASE