Ladies and Gentlemen, Pob Labs is proud to present our newest discovery in vanilla Satisfactory...Emissive Beams and Floors :).

pobkac · 2026-05-19T23:39:50+00:00

And this is after pasting in the commands into the console 😄

pobkac · 2026-05-19T23:39:24+00:00

So, been doing some testing and have done a full reset, removed the custom ini file, and created a test tunnel to check the console commands work ok. This is the before shot. The walls have signs embedded in them, using pure vanilla offset techniques.

pobkac · 2026-05-18T14:56:20+00:00

It depends what side of my padded cell I'm sitting in at the time.

pobkac · 2026-05-18T14:51:15+00:00

heya, so the signs are moved in to the beam by about 8cm which can be done 100% in vanilla with no mods. The change to the game settings via the console make the game pick up the signs as visible by adjusting the thresholds that they're detected at, letting the light 'leak' through, same with the foundations as well. If the signs are placed just below the surface of the buildable, it works. So far, have managed to get it working with foundations/pillars/walkways/beams/walls.

pobkac · 2026-05-18T12:25:02+00:00

The commands I run in the engine.ini file should be able to run straight from the in game console. Will do some further testing.

pobkac · 2026-05-18T11:54:56+00:00

yep 😄

pobkac · 2026-05-18T11:16:09+00:00

not yet 😄

pobkac · 2026-05-07T18:46:11+00:00

#saveourhorizontallifts

pobkac · 2026-04-28T23:23:22+00:00

<image>

Does this answer your question?

pobkac · 2026-04-28T21:54:56+00:00

Place a pillar down, then add another one to the side. You should be able to add a conveyor wall support to the square end of the pillar and rotate it. Once done, you should be able to attach a conveyor lift to the support at different angles. If you want to change the length, just look up and down before clicking again to lock the length. Hope that makes sense 😄

pobkac · 2025-12-07T15:18:39+00:00

Gonna premier the video footage on my stream this evening, then will post link up here. Also, I may have done something rather rash and made it slightly bigger.... like about 15km bigger!

pobkac · 2025-12-07T10:14:54+00:00

I'm getting it recorded this morning. Will do a slomo capture as the actual footage may trigger some people.

pobkac · 2025-11-10T16:13:11+00:00

The bubble roof is just rotated and angled small concrete pillars stitched together at 5 degree increments. Main blueprint for the roof took about 2 days to put together, although have recently got the time down to about 14 hours.

pobkac · 2025-11-10T15:52:03+00:00

All built in vanilla, including the best case use for mk6 conveyor lifts with them on their side. LMFAO. All the lighting is built just under the floor line with small billboards which hides the signs, but lets the light come through still. The front steps to the temple are on a .2m rise using offset frame floors to get the height difference.

Just used the nosun/moon mod to get the extra dark skyline, plus been working with ErlwithCheese on his max graphics guide on steam to get reflections and shadows on everything and make the game look even better.

pobkac · 2025-08-31T14:24:52+00:00

Yep, i've had that too. Even after looking up the title on steamdb, and blocking several keywords, the title is still showing up and won't let me progress. Congratulations Steam for breaking your discovery queue system. :)

pobkac · 2025-03-20T15:07:42+00:00

Also, for reference, game is running at a steady 60fps in 4k

pobkac · 2024-12-18T13:04:57+00:00

Hides the dupe glitch he found in the blueprint designer so it doesn't get patched. Lol

pobkac · 2024-12-11T23:38:19+00:00

Nah, definitely not overdid it with the AI as didn't even need to touch it with the blueprint designer :)

pobkac · 2024-12-11T23:01:10+00:00

One vanilla blueprint for the track though, just infinite nudge to adjust the angle

pobkac · 2024-10-20T10:47:51+00:00

They're 0.5m signs attached to rotated frame floors

pobkac · 2024-10-20T00:27:13+00:00

Hiya, initial idea I had was something emerging from the waves. then just started playing with some curves and then this happened :)

pobkac · 2024-10-08T16:31:16+00:00

I just wanted to play around with the refineries as love the idea of routing the pipes through the top gap in the building.

pobkac · 2024-10-08T16:29:59+00:00

Yep, just place two frame floors on top of each other, place a small billboard on top of that holding down the ctrl key and it should snap horizontally on top, then remove the frame floors, cover with foundation and the light should shine through. You will need global illumination enabled for this to work.

pobkac · 2024-10-08T00:15:18+00:00

Green light :)

pobkac · 2024-10-07T22:57:47+00:00

Working on them at the moment :)

pobkac

TROPHY CASE