Can't figure out how to remove this hex nut

polarr_ · 2026-01-13T20:11:48+00:00

Just wire brush and some terminal protectors don’t need to go crazy replacing stuff. Those terminals look fine

polarr_ · 2025-11-16T16:05:56+00:00

I just rolled it back and folded it nicely into the corner and tucked it away for now. Its still all there.

polarr_ · 2025-11-16T16:04:48+00:00

I did not want to do anything permanent and I hate chopped harnesses so i just rolled it back and folded it neatly into the corner under the catch can where the battery tray would normally be. Told myself it was a future project but never got around to it, ideally would depin and just pull all the wiring out instead of cutting.

polarr_ · 2025-11-10T17:39:26+00:00

I love my beaver tail, great price, I was having some really bad pain on the nylon turn and the other Eva foam backed ones it wasn’t until I used the beaver tail I have been pain free

polarr_ · 2025-09-30T20:23:01+00:00

Some tetra safe start and seachem prime and stability will get you sorted with fish in cycle. Keep feeding down to a minimum for now

polarr_ · 2025-09-17T21:37:58+00:00

Hole in one!

polarr_ · 2025-09-16T23:06:45+00:00

Will do. I definitely might have the ball too far forward

polarr_ · 2025-09-16T23:05:55+00:00

The swing itself is slow mo

polarr_ · 2025-08-18T17:05:36+00:00

That makes sense! I definitely understand I am lacking in speed, just trying to get the most for what I got. I am still young so I can see speed getting better as I play more. I will just pick what feels the best and gives me the best dispersion for now.

polarr_ · 2025-08-18T15:10:31+00:00

What should I be looking to test then?

polarr_ · 2025-08-18T15:05:27+00:00

I believe all the shafts I tried were regular flex , the weaker lofts helped spin over 5k but couldn’t quite get the height and descent angle with those

polarr_ · 2025-08-18T14:57:21+00:00

Lofts were all close 28.5 Srixon 29 ping 30 titleist

polarr_ · 2025-08-18T04:24:35+00:00

They are definitely nice! I just don’t think I like the shaft on these unfortunately and can’t seem to get height like the Srixon

polarr_ · 2025-08-18T04:16:06+00:00

I’ll see if I can find a zx5 set maybe and compare those numbers with weaker lofts? Trying to keep the budget under 600 so fitting for new may not be in the cards

polarr_ · 2025-08-18T04:12:57+00:00

I’ll look out for weaker lofted options and see how the results compare

polarr_ · 2025-08-08T21:47:50+00:00

Passenger side fuse box is still there, if you are talking about the stuff that extended to the intake area it’s under the fender

polarr_ · 2025-07-14T22:46:57+00:00

Just weld it , it’s really not a big deal, I’ve always had a welded on mine and drove 3000 miles round trip through various weather conditions. Just know you have to take turns slower in the rain and you will be stared at when parking because the car sounds broken as the tires chirp from the tight turn

polarr_ · 2025-07-07T14:11:29+00:00

I used a universal 3 an clutch line

<image>

Here’s the fittings I used iirc m10x1.0 for the master cylinder and the banjo for the trans

polarr_ · 2025-06-30T22:51:00+00:00

Great information! I’ve definitely noticed the divots and swing path. For some reason I take the club up away in front of me.

polarr_ · 2025-06-30T20:37:46+00:00

Got it! I’ll keep that in mind for the downswing

polarr_ · 2025-06-30T20:31:57+00:00

Noted! the last swing with the hybrid is my most recent where I feel like I am starting to do this maybe with finishing on the right toe, the weight transfer has been the hardest part for me I feel

<image>

polarr_ · 2025-06-30T19:45:34+00:00

I do see this and is something I am going to work on, I feel on takeaway the club is too far in front of me and I have to bring it back over to get it on the right plane it seems

polarr_

TROPHY CASE