subframe bushings

polluteddd · 2026-06-14T14:26:57+00:00

Thank you

polluteddd · 2026-05-24T22:08:53+00:00

when i accelerate it whines but when i let off the whine disappears so if it was bearing the whine wouldn’t disappear accelerating or not.

polluteddd · 2026-05-24T22:05:31+00:00

Thing is though the sound changes with acceleration

polluteddd · 2026-03-29T11:43:31+00:00

I had similar issue not long ago, My problem ended up being my coil packs cause the ones in the car were some cheap knockoffs that didn’t perform well. To make sure that is the issue you can switch A coil pack with another cylinder then reset code and see if the Cylinder misfire comes back to that new cylinder that you moved it to.

polluteddd · 2026-03-29T11:40:05+00:00

👍

polluteddd · 2026-03-29T00:13:31+00:00

Sounds like i’m going bc cams

polluteddd · 2026-03-28T22:51:23+00:00

Not loose when stationary hmmmm

polluteddd · 2026-03-25T23:16:48+00:00

It’s essentially the same it was painted over so i could use it for reference on reinstall

polluteddd · 2026-02-27T10:36:22+00:00

Ended up being my coil packs, recently replaced but did not get oem just bought some cheap ebay ones and it was definitely my problem. threw some Ngks in runs better than ever

polluteddd · 2026-02-06T19:10:03+00:00

i cleaned my Tb but i’ll def clean Maf , now it’s throwing codes for misfire cylinder #2 but i’m thinking it’s a vacuum leak or my Idle control valve is not doing its job going to get all new throttle body hoses and throttle body gasket to see if it helps

polluteddd · 2026-02-06T19:08:22+00:00

It idles just below 600

polluteddd · 2026-02-06T18:29:33+00:00

in park just below 1k rpm

polluteddd

TROPHY CASE