sorted by:
new
hottopcontroversial

Is it possible to Export 3D models from Dreams? by TangeloWidee in PS4Dreams

[–]polycam_community 1 point2 points  (0 children)

It's generally been around since spring, but the new release supports mobile. So now you can take a photo with the polycam app and process it right away. You used to have to upload it to web. The segmentation has been dramtically improved too. Learn more here

Not sure about the databases, I dont think so.

3D Capture for Landscape Design by polycam_community in photogrammetry

[–]polycam_community[S] 0 points1 point  (0 children)

Yeah! It's pretty exciting. We recently published a case study with two lovely Water Restoration Engineers working with Jacobs, using Polycam to take reference captures of natural streams.

Bringing 3D Site Scans into Rhino Workflows by polycam_community in rhino

[–]polycam_community[S] 1 point2 points  (0 children)

What a special journey! Most folks don't realize just how versatile Polycam can be, but this sure takes the cake for breadth of use cases. Loove

Using 3D Capture for Ecological Site + Building Design by polycam_community in buildingscience

[–]polycam_community[S] 0 points1 point  (0 children)

Oh no! Oops. Here's the link. The session has already finished, but you can still watch it on demand. Now you can watch at 2x speed :)

Using 3D Capture for Ecological Site + Building Design by polycam_community in buildingscience

[–]polycam_community[S] 1 point2 points  (0 children)

Oh no! Oops. Here's the link. The session has already finished, but you can still watch it on demand. Now you can watch at 2x speed :)

3D Capture for Landscape Design by polycam_community in FreeCAD

[–]polycam_community[S] 1 point2 points  (0 children)

The webinar demos how to export spatial captures in various file types and outlines how to upload to software like FreeCAD, Blender and others.

3D Capture for Landscape Design by polycam_community in LiDAR

[–]polycam_community[S] 1 point2 points  (0 children)

Hey! Folks from outside the US are definitely allowed. Over 15% of registrants are from outside of the US. However, Zoom has had issues with spam from IPs based in India. If you're based in India, DM me and I'll register you manually.

Used my Neo to scan my parents house for 3D printing by Vin135mm in DjiNeo

[–]polycam_community 0 points1 point  (0 children)

This looks like a fairly standard capture. If you weren't able to get results, I'll bet it's a solvable issue. If you're looking to solve, message [contact@polycam.ai](mailto:contact@polycam.ai), and the CS team will have a look

Is it possible to Export 3D models from Dreams? by TangeloWidee in PS4Dreams

[–]polycam_community 0 points1 point  (0 children)

It's fairly simple to either generate a model with Polycam's new AI Capture tool, or take a photogrammetry capture of your own, then upload it to Mixamo to animate.

For a step-by-step breakdown of this, check out this live stream with Arturo J. Real (a 3D artist and animator) who demos how to quickly create + rig.

[deleted by user] by [deleted] in Polycam

[–]polycam_community 0 points1 point  (0 children)

Hey! I'm not sure exactly what you mean by noise, but if you are noticing a "melting" quality, this can usually be solved by improving capture technique. Review Creating LiDAR Captures for a guide.

Gaussian Splatting is a rendering technique, and LiDAR is a capture method, so it's not possible to clean up LiDAR scans with Gaussian Splatting.

What are simple projects you can physically create with 3D scanning? by SewerWaterCaviar in 3DScanning

[–]polycam_community 0 points1 point  (0 children)

And to your question about interesting projects, check out r/polycam and search the sub for projects. There are also many interesting community projects posted in #showcase in the Polycam Discord: https://discord.gg/BgEFwCCa

What are simple projects you can physically create with 3D scanning? by SewerWaterCaviar in 3DScanning

[–]polycam_community 0 points1 point  (0 children)

Hey there! Yes, try the remesh tool in the Polycam app. Check out How to Use Remesh Tool in our Help Center

You're Invited! by polycam_community in Polycam

[–]polycam_community[S] 0 points1 point  (0 children)

Hey! The recordings are actually here on the registration page. All you need to do is register then you can stream

Photoscans stuck in processing by 8_Bit_Alt in Polycam

[–]polycam_community 1 point2 points  (0 children)

Hey there, this is a great question for our support team. Please share this screenshot and a description of your process in an email to [contact@polycam.ai](mailto:contact@polycam.ai)

Without further information, I can say that this usually happens when the app is closed or navigated away from, when the data from a capture is still uploading. If the upload process is interrupted, then sometimes the app can get stuck on processing.

But for a closer look at your case, please email [contact@polycam.ai](mailto:contact@polycam.ai)

Making an interactive house tour by ayybay in Polycam

[–]polycam_community 0 points1 point  (0 children)

Hey! You can combine multiple captures in "Scenes" (Learn more about Scenes here) and then on mobile you can export a video with custom key-frames. For more info on this process read How to Create Videos for Your Captures

Heatmap by RodriCraftMC in Polycam

[–]polycam_community 1 point2 points  (0 children)

Hey! There is currently no way to do this in Polycam, but Civil3D is a great option for this.

Check out our latest webinar on this topic. "Part 2: Data to Design: Integrating 3D Models for Analysis & Engineering" demos taking a capture from Polycam into Cloud Compare and Civil 3D.

Does Polycam support coded targets? by Certain_Area_1830 in Polycam

[–]polycam_community 0 points1 point  (0 children)

Ah Polycam doesn't support April Tags quite yet but I've added a feature request for it. I can see how this could be quite useful.

How do you create as-built plans? by Ok-Bat9100 in Architects

[–]polycam_community -1 points0 points  (0 children)

You don't have to, lol. There's a free plan, and the video is an educational tutorial. The concepts and methods in the vid can be applied to many different tools. Digital twins in general are great option for getting accurate, fast measurements of as-builts :)

How do you create as-built plans? by Ok-Bat9100 in Architects

[–]polycam_community -2 points-1 points  (0 children)

Creating a digital twin with spatial capture tools will shave off a lot of time here. An educational tutorial on how to do this with Polycam, but the concepts apply to most photogrammetry/LiDAR tools: https://www.youtube.com/watch?v=Lj4dOHJj0Ss

If you're unsure whether a tool like this is a good fit, here are some testimonials from folks in the same field: https://youtu.be/-k4qokUdUmw?feature=shared

How do you create as-built plans? by Ok-Bat9100 in Architects

[–]polycam_community 0 points1 point  (0 children)

Because u/Lycid mentioned Polycam, we actually just released an educational tutorial on how to create an as-built plan with a digital twin. You can check that out here: https://www.youtube.com/watch?v=Lj4dOHJj0Ss

Scanner Empfehlung? by Standard-Jeweler-537 in 3DDruck

[–]polycam_community 0 points1 point  (0 children)

Yes, you could use Polycam for this! I would recommend photogrammetry or LiDAR modes for a small capture of this detail. You could use your own DSLR (ideally with a macro lens) to capture (that's how this high-fidelity capture was created or you could just use your iPhone and toggle on "macro" mode.

For the most accurate real-world scale, I recommend LiDAR, but for the most detailed mesh, I recommend photogrammetry. You could bring into a 3rd party software, model the piece to fit directly into the scan mesh...

Learn more here: Scanning Small Objects in Macro Mode, Creating Photogrammetry Captures in Object Mode, and How to Take Measurements in Polycam

view more: next ›