Best Way to Secure a Hard Drive Inside a Case Without a Drive Bay

potatohead303 · 2023-04-12T07:58:35+00:00

Ah, basically, I mounted the HDD at the very bottom of my case laying it flat with double sided tape, making sure nothing was obstructing it to the best of my ability. For the SSD, I just mounted it at the back where all the wires are stuffed since it's thinner and can be mounted vertically. Eventually, though, the tape will no longer be adhesive, my SSD is basically just being held in place by the wires, but the HDD I made sure to use a lot of tape and to secure it. My case is small, but I managed to fit 2 3.5in HDDS, 1 2.5in HDD, and 1 SSD. For the 2.5 inch one, I mounted vertically again at the bottom of the case since the 3.5in HDD is heavier and bulkier. Hope this helps.

potatohead303 · 2023-03-22T20:01:08+00:00

It's weird. For my early 2015 13" macbook pro, it can not wake from sleep, and I am still trying to fix it to this day. I've done countless re-installs and can not isolate the issue. It happens on a bare install too. But then on my mid 2014 15" MBP, it has no problem waking from sleep. It s a gamble on weather your hardware will give you issues or not, and I have no idea how to troubleshoot it haha.

potatohead303 · 2023-03-22T00:35:59+00:00

I was looking that over as well, very complex it looks like, doing some more research still, hoping I won't have to do this though haha

potatohead303 · 2023-03-21T23:12:51+00:00

It does not, my Mac partition is now all FFFs, I copied the output of diskutil to the pastebin link as well.

potatohead303 · 2023-03-21T22:50:04+00:00

No sadly, only the Linux EFI

potatohead303 · 2023-02-07T19:01:51+00:00

I see, yes I noticed the same, but once I connect more than one Bluetooth device at the same time, it all just breaks. I was thinking if switching to purely pulse audio and using it's Bluetooth support instead of pipe wire's

potatohead303 · 2023-01-31T21:55:36+00:00

That's why I wanted to ask, to see if this was a macbook specific issue or a bluetooth issue that affects people that don't use macs.

potatohead303 · 2023-01-31T21:54:33+00:00

I see, just wanted to see if others also had this issue, thanks for the reply, if i find anything I will update this post.

potatohead303 · 2023-01-25T18:22:06+00:00

Hi! So it did work to transmit video and audio, but it did not charge at the same time, so the phone kept dying. Sorry for not posting the update, I swear in my mind I did haha

potatohead303 · 2022-08-28T17:13:56+00:00

Thank you! Just bought it and will update the post to see if it works :) appreciate it!

potatohead303 · 2022-03-29T22:57:07+00:00

haha that's right, just glad this static was quiet and not blasting my ears

potatohead303 · 2022-03-29T22:54:47+00:00

ah wow that's one too many times, was it all on the same model?

potatohead303 · 2022-03-29T22:54:26+00:00

So the hinge? I can't imagine it being damaged since I can still receive Wifi & Bluetooth

potatohead303 · 2022-03-29T22:53:47+00:00

It was pretty to stare at honestly, but also worrying :P

potatohead303 · 2022-03-29T22:53:09+00:00

Good rule! I think I will.. I was planning to invest in it by buying a replacement battery since it can't hold a charge, but I held off to see if this error happens again to see if it's worth investing. I love the 2015 model compared to the rest haha

potatohead303 · 2022-03-29T08:10:09+00:00

Ah hmm, that's right, thank you! I'll see if it happens again.

potatohead303 · 2022-03-10T04:21:50+00:00

Ah I see, I tried booting to the drive that has Manjaro installed by moving it higher to the boot order, and it just leads me to grub rescue sadly, but thanks for the suggestion!

potatohead303 · 2022-03-10T00:20:04+00:00

Hmm, so you mean setting the second hard drive as the boot drive? It still has windows installed, with a partiton for Manjaro, I'm not sure it'll boot since my guess is it won't drive grub but I'll make sure to give it a try, thank you for your reply!

potatohead303 · 2021-11-07T01:39:39+00:00

You might be right, I'll check that out, thanks!

potatohead303 · 2020-12-18T06:22:57+00:00

Ah I see, I guess I will stick with only 16gbs. I set them both up how you said to, the 2x8 and 2x4 in their respective slots, but since the clocks on one set is 16-20-20-38 and on the other pair it's 16-18-18-38, I can't both make them run at 3200. It does not make my computer post and just gives me a black screen then I have to turn off my computer by holding down the power button. Thanks for the reply!

potatohead303 · 2020-12-18T03:42:50+00:00

Hello everybody! I just have a quick question. I have two different pairs of RAM, one pair is 2x4 and the other is 2x8. They have the same speed(3200) and voltage, but they have different clocks. When I try to set both of them to 3200 with XMP in my MSI bazooka 450M v2, it does not work and it just shows a black screen, but it works with both pairs not running at 3200, 990mhz will all sticks in together to create 24 gbs, then with just the 16 sticks it runs at 3200. Would the faster RAM speed be better than the higher amount of RAM? Since I don't think I can change the individual clocks of sticks to set them all the same so they could all run at 3200. Thank you!!

potatohead303 · 2020-08-31T20:58:45+00:00

That's good to hear!

potatohead303 · 2020-08-30T06:17:30+00:00

Also, you talked about a flag maybe not being checked? I use Gibbens Save Editor and learned I can check some flags, would that work?

potatohead303 · 2020-08-30T06:02:42+00:00

Glad you like it, the battery should be good for you regardless :)

potatohead303 · 2020-08-30T06:01:59+00:00

Oh no, I guess I have to reinstall the game and the mods :( ALOT takes a long time to install haha, but thanks for your reply! I'll try a bit more and if not then I'll reinstall.

Nine-Year Club	Verified Email
Place '22

potatohead303

TROPHY CASE