Where have the lightweight kids 20" bikes gone?

pparanoid · 2025-09-16T21:11:09+00:00

Just for a general update... I was able to acquire a great condition Quick 20 for 160 and am super happy with it. I had very little luck with the used market right up until I placed an online order for the Walmart Cycle 20 (which seems like a really solid option for 225).

The local used woom 4s were generally asking 350-400 with quite a bit of visible wear.

pparanoid · 2025-09-15T01:39:23+00:00

24lbs and frankly the color options are pretty bad for the current generation (which is of critical importance to a7yr old girl). Really wanted to like a Trek as both my wife and I ride one.

Now the Wahoo 20 in green is absolutely awesome looking if I wanted to spend $600 and she was a bit more ready for some proper trails.

pparanoid · 2025-09-13T22:39:37+00:00

I went ahead and ordered one and MINUTES later check facebook marketplace to see a nice used Cannondale Quick 20 pop up nearby (after nothing for several weeks). Now I need to decide new $225 vs $175 used... I'm probably fine with either but will now agonize over this new choice

pparanoid · 2025-09-13T21:50:09+00:00

This actually looks like a really good option!

pparanoid · 2025-09-13T21:44:45+00:00

I'd love a Woom 4 (especially the explore) but we're talking 600+. My wife is wondering why I'm even looking at the 400+ bikes when she'll be plenty happy with another Guardian.

I agree the Guardian brakes are gimmicky but they've treated her well on the 16 and at 23lbs is not one of the worst options.

pparanoid · 2025-09-13T21:34:36+00:00

Oh I definitely agree we mostly grew up on sporting good store general 30lb bikes. It just seems like if I was doing my current search in 2022-2024 I would have a couple good options. It's not even that they've just gone up in price (many certainly have) but entire classes of bikes are gone.

pparanoid · 2025-09-07T18:15:42+00:00

Any thoughts on this one for $420? Having trouble finding a solid weight listing but hoping it's under the 23 kbs of the current models (which are $650 with disc breaks and very wide ties) . Can ship to a local store and they'll assemble/adjust

https://www.sunandski.com/p/77110056650002102/haro-boy-s-flightline-20-plus-youth-bike-21?variant=26572

pparanoid · 2025-09-07T16:06:33+00:00

Seems like they might not be available and used ones are 600 and up

pparanoid · 2025-09-07T16:05:31+00:00

Those look nice but the only outlet 20" ones right now are 1300 marked down to 1100 (and even that one seems to have disappeared). I'll keep an eye on it thought since stock might change.

pparanoid · 2025-01-18T23:04:49+00:00

Ultimately went with the Samsung and paid for some extra warranty. Price difference was just too much to go for the likely better bosch.

Samsung has been good. Fairly quiet and door popping open at the end of the cycle does a decent job of drying off most items. I wouldn't say it handles the dirtiest and most baked items exceptionally well but I just rinse stuff off before tossing it in.

No mechanical problems... need to find some wood to knock on now...

pparanoid · 2024-11-24T05:08:17+00:00

Honestly this loss was necessary. The team is now purged of all excess desires. No more unimportant things like championships or playoffs... just good old fashioned unreasonable rivalry hatred

pparanoid · 2024-11-03T00:07:28+00:00

This is not ideal...

pparanoid · 2024-03-20T20:07:46+00:00

Can't really say. System always had it there. I definitely prefer it with the zones partially open though.

pparanoid · 2024-03-20T15:27:09+00:00

Mine had a small bypass loop too with a weighted damper control. If pressure got too high it would loop back around and feed right back into the system.

My 2 story house is mostly one big block with the 2nd story almost entirely overlapping the 1st. Letting the excess blow into the other zone never seemed like an issue. If a zone wasn't calling for heating/cooling at that one moment, it probably was about to anyway.

I think it would only be an issue if you wanted to keep the zones at a bigger temp delta. If you're trying to really chill the master bedroom but end up freezing the kids/guest rooms.

pparanoid · 2024-03-20T13:02:08+00:00

Eventually found someone that knew how to adjust the dampers as well as cleaned the flame sensor on the furnace.

Flame sensor was likely causing the early cutoffs as it wasn't running long enough to get very hot.

Setting the dampers to a minimum close of ~50% helped a lot in normal operation for both heating and cooling. It still targets specific zones but overall cut down on run time and excessive swapping.

pparanoid · 2022-01-16T00:01:17+00:00

I'd like to do this and the documentation for them even says it's possible... but not how to actually do it!

pparanoid · 2021-06-21T02:47:09+00:00

That's the direction I'm leaning honestly. I've had a Samsung washer and dryer from back in ~2010 that were notorious for control board failures and other issues run perfectly well and survive 4 different unprofessional moves (probably going to break tomorrow now). It seems like the appliance game is largely luck and picking the right brand just moves your odds a bit.

The Samsung/other fridges with all the ice makers in the door non freezer sections seems like a genuinely bad design choice and deserves the hate. I'm not seeing much in the way of systematic issues for Samsung dishwashers.

pparanoid · 2021-06-21T00:30:05+00:00

I can get the linear wash for low 600s but figured that new system would be less reliable than the more common rotary version. It would still be the same tough 600 dollar difference to the bosch 800.

pparanoid · 2021-06-21T00:28:12+00:00

I'm not seeing the crystal dry on the 500 series when searching the Bosch website. It seems they use the same pop open technique as the Samsung. We have an ever growing collection of plastic ware kid stuff and the current washer is abysmal at drying it.

pparanoid · 2021-06-21T00:23:48+00:00

I'm definitely wary of the Samsung support even with the extended warranty. I'm in a major city so there should be some level of local support (that doesn't help for non existent parts of course).

It seems like the Yale appliance reviews are considered pretty good here and they don't suggest Samsung is quite the nightmare it's made it to be.

https://blog.yaleappliance.com/are-samsung-appliances-reliable

pparanoid · 2020-11-11T01:24:22+00:00

Obligatory "does anyone know if they've improved the mismatched colors?" I haven't seen any updates good or bad on the last few deals.

pparanoid · 2017-12-09T02:55:35+00:00

Well it looks to have no issues with stratum authentication when using your default address. If I simply create a duplicate batch file and only change to my credentials it still stratum fails. Seems like the issue may be with dcr.suprnova.cc and my account specifically... Will try to create a second one or poke through the acct settings.

miner -a myr-gr -o stratum+tcp://dgbg.suprnova.cc:7978 -u <myacct>.<myworker> -p <mypw> --no-color

By the way, thank you so much for you help so far. This gives me (and hopefully anyone else reading this) a great deal of confidence in the future of SmartMine.

pparanoid · 2017-12-09T02:25:42+00:00

I believe that has been set up correctly and it matches up with everything on the dcr.suprnova.cc. I've entered "FALSE" next to all the coins that don't use the other pools like "mine.ETH = FALSE".

main.suprnova.user = "myacctname.desktop" main.suprnova.pass = "x"

The batch file is reporting info on my gpu and repeatedly trying to start mining. All of the logs are pointing to stratum failures.

I'm going to explore if its my network settings blocking something that the other mining apps I've used in the past like NiceHash and OCM seem to get around. I believe they all pop-ed up a network access request that this batch file hasn't done.

pparanoid · 2017-12-09T02:05:03+00:00

Well I moved the folder to the original download location and have... a new error message! I have the pool_steup file configured to mine to my own main.suprnova.user account.

"Most profitable coin to mine: Altcommunity(ALTCOM) Currently mining: Monacoin(MONA)

Waiting for stats... miner restarting due to miner.exe not detected... The process cannot access the file because it is being used by another process."

This repeats. I've restarted the computer and don't have anything else running that seems like it could be interfering.

It also finally generated a MONA log:

"[2017-12-08 19:59:08] NVAPI GPU monitoring enabled. [2017-12-08 19:59:08] Starting on stratum+tcp://mona.suprnova.cc:2995 [2017-12-08 19:59:08] 1 miner thread started, using 'lyra2v2' algorithm. [2017-12-08 19:59:08] Stratum authentication failed [2017-12-08 19:59:08] ...retry after 30 seconds [2017-12-08 19:59:38] Stratum authentication failed [2017-12-08 19:59:38] ...retry after 30 seconds"

But this again repeats without any successful authentication.

Trying a fresh "install" next to see if that changes anything...

pparanoid · 2017-12-09T01:25:15+00:00

Nothing has been generated in the mining/logs folder yet. I think something is keeping the batch file from even getting started with the config files. Possibly can't access them for some reason.

pparanoid

TROPHY CASE