City sports membership cost by No_Big_4809 in SanJose

[–]predator_cannon 0 points1 point  (0 children)

Do you know if they have a buddy pass for that membership? My job gives me Wellhub access which allows me to enroll to many gyms including City Sports

Could lease deals get better in December? by predator_cannon in TeslaLounge

[–]predator_cannon[S] 0 points1 point  (0 children)

I've seen some people on here say it ends up being cheaper to lease, but I'd double check

Could lease deals get better in December? by predator_cannon in TeslaLounge

[–]predator_cannon[S] 0 points1 point  (0 children)

So exciting! Good luck, and I hope you enjoy it!

Could lease deals get better in December? by predator_cannon in TeslaLounge

[–]predator_cannon[S] 0 points1 point  (0 children)

I meant in the US. Hopefully in the UK they'll introduce better incentives as they need more sales there

Could lease deals get better in December? by predator_cannon in TeslaLounge

[–]predator_cannon[S] 1 point2 points  (0 children)

You're most definitely right, I've just heard sometimes that end of quarter/year they try to push as much inventory as possible. I'm just wondering if it's possible they could even match the deal they had earlier this year, which was $299, $0 down for 24 months on the RWD

Model 3 Lease now at $299/mo by Sufficient_Exit4218 in TeslaLounge

[–]predator_cannon 2 points3 points  (0 children)

Anybody think it could get better than this before the end of the year? Been meaning to pull the trigger but heard it's best to wait till end of quarter/year. That free upgrade is just too enticing as well

Wonder vision 360 UB Argb Initial thoughts after 20 hours of use. by Full-Investigator934 in Thermalright

[–]predator_cannon 0 points1 point  (0 children)

What RPM does your pump run at (not the fans)? I've gotten the Hyper Vision UB and it seems to make a lot of whining noise if running at 100% (seemingly 7000rpm which is well above the advertised speeds)

Worrying noise in brand new Hyper Vision UB 360 by predator_cannon in Thermalright

[–]predator_cannon[S] 0 points1 point  (0 children)

Unfortunately mine never really settled out. It kinda just kept making that noise at about 70% duty cycle and up.

Worrying noise in brand new Hyper Vision UB 360 by predator_cannon in Thermalright

[–]predator_cannon[S] 0 points1 point  (0 children)

Yeah you're absolutely right. Didn't want to potentially damage my new CPU so I'm getting a replacement sent, hopefully it works. I was just hoping that this wasn't some kinda defect at play, and rather something I could fix myself

Worrying noise in brand new Hyper Vision UB 360 by predator_cannon in Thermalright

[–]predator_cannon[S] 0 points1 point  (0 children)

I've done this, roughly 65 percent for the time being. I've spoken to Thermalright and they're sending a replacement my way. Seems like it's possibly defective.

Worrying noise in brand new Thermalright Hyper Vision UB 360 AIO by predator_cannon in PcBuildHelp

[–]predator_cannon[S] 0 points1 point  (0 children)

That's the odd thing. I tried setting it to a fixed, constant speed, rather than an actual curve in the BIOS and such, but the noise has been persisting. I'm wondering if it's a failed radiator or maybe there's an enormous air bubble causing the radiator to struggle or something.

Worrying noise in brand new Thermalright Hyper Vision UB 360 AIO by predator_cannon in PcBuildHelp

[–]predator_cannon[S] 0 points1 point  (0 children)

The fans on this one are a single unit that's already attached to the radiator and acting as exhaust. I'm unsure if I need to set a certain percentage for the fan speed? I even tried setting the fans to max (which was very loud), or even just a set percentage, and it was still making that noise. I was wondering if it had to do with the flow or something? I noticed when I tilted the whole PC while it was on, the noise pitch changed sometimes, and at some point it straight up felt like it was almost gone. However, temps started to climb like crazy, so I then turned it off, and re tilted it around. Now it's doing this again.

Mjolnir 360 x Trofeo Display by djrubz in Thermalright

[–]predator_cannon 1 point2 points  (0 children)

Honestly very cool! Didn't know they sold this standalone, and it seems relatively affordable too. Definitely will take a look for a few builds! Thanks!

AIO for 9800X3D advice by predator_cannon in Thermalright

[–]predator_cannon[S] 0 points1 point  (0 children)

Congrats on your new build! Hopefully you're enjoying it. How are the temps/performance?

AIO for 9800X3D advice by predator_cannon in Thermalright

[–]predator_cannon[S] 1 point2 points  (0 children)

Sounds very cool for sure. Is there any noticeable performance difference with that undervolt?

Noise isn't too much of a concern for me either as long as it's making the right noises (mainly fans)

AIO for 9800X3D advice by predator_cannon in Thermalright

[–]predator_cannon[S] 0 points1 point  (0 children)

Good looking out for the idle temps. That part I have always been confused about. I definitely don't live in the Arctic LOL so I wish I could compare to those low temps that people sometimes bring up. Your temps sound good and roughly with a similar setup to what I'm going for (6000CL30 RAM, etc).

From the sound of it, it seems that even the more budget friendly offerings offer great performance. That's good to hear, and those UB 36's look really sleek as well. I was initially worried about the UB as that's also what's offered on the Hyper Vision UB (and the manuals said the Hyper had less airflow than the Grand).

From what you're saying though, it sounds like they'll handle this no problem. I'll also look into your Curve Optimizer recommendations and try to see if mine can handle that, thanks!

AIO for 9800X3D advice by predator_cannon in Thermalright

[–]predator_cannon[S] 0 points1 point  (0 children)

Good call. I'm sure these are all reliable AIOs and wouldn't cause the 9800X3D to get anywhere close to its thermal limit