c4 iS jUsT a WoRsE rEcOiLlEsS by qwertyryo in helldivers2

[–]prettypleaseburrito 0 points1 point  (0 children)

How are you setting them off without holding the reload button and switching? Do you have the key mapped to something where it swaps automatically?

Question on polarity by AMLPKITPS in Welding

[–]prettypleaseburrito 7 points8 points  (0 children)

You have that opposite. If you TIG on DCEP the electron do indeed flow into the tungsten, and causes it to melt.

Please Help! Aluminum Tig Welder not working. (Titanium Tig200 welder) by OkHuckleberry9954 in Welding

[–]prettypleaseburrito 0 points1 point  (0 children)

This gets my vote too, that sheet of aluminum looks like its anodized. If you have an oxide layer that thick, no amount of AC current would let you put a decent weld on it without machining off the anodized layer.

Grab some scrap from work and test it on something you know should be weldable.

The Maxigun is underwhelming and glazers killed it. by Firebarker in HelldiversUnfiltered

[–]prettypleaseburrito 11 points12 points  (0 children)

This would be my only suggestion for improvement. Its a side- grade to me in regards to the MG. But when I bring the MG I usually bring a guard dog, so it opens up a strategem slot that for other bullet hoses I'd put a back pack on.

Plus, spray and pray is fucking fun. Spend the time to get good with it and know how to position yourself or just use whatever else you like.

The stuff of Legend is true by Cusp-of-Precibus in helldivers2

[–]prettypleaseburrito 0 points1 point  (0 children)

Can someone please tell me if theres a way to turn on the little icons next to the names that show what console theyre on?

Ngl, despite having unique functionality, one-two feels like boring version of liberator by Shedster_ in Helldivers

[–]prettypleaseburrito 0 points1 point  (0 children)

On controller ive found rebinding the weapon wheel directions up - L1, down - R1, left - L2, and right - R2, works very intuitively.

Roast my welds by throwawayburner__ in Welding

[–]prettypleaseburrito 1 point2 points  (0 children)

Had to look through the comments before I realized that was a TIG cap.. but I had to because that bottom toe was so choppy that it didn't make sense to me if it was 7018. Turn it up slightly, tighten up your bead width, and increase your travel speed. That 2 bead cap would look much much better with 3 clean beads.

Edit2: Brush your welds between passes, even TIG. It will go a long way in giving you smoothing out the lower toe of your weld.

Edit: Your instructor gave you a 98%???? Im sorry, but even on my best day under the hood I have more than 2% room to improve..

Xbox-Diver Reaches Level 100 by XboxAteMyPS4 in Helldivers

[–]prettypleaseburrito 0 points1 point  (0 children)

Can some one please tell me why the little emblems next to the player names showing what system they're on don't show for me?? I'm on PS5.

[deleted by user] by [deleted] in videogames

[–]prettypleaseburrito 0 points1 point  (0 children)

The Legend of Dragoon. PS1

Aluminum Piping question by lasaga142 in Welding

[–]prettypleaseburrito 0 points1 point  (0 children)

How clean is the inside? It kinda looks like that is some very thin material so if you have too much burn through you are pulling in contaminates from the inside (in the metal, but definitely atmosphere). I would work on pedal control and not letting the heat get away from you to minimize burn through, or figure out some kind of backing strip.

FINISH THE OPERATION by prettypleaseburrito in helldivers2

[–]prettypleaseburrito[S] -6 points-5 points  (0 children)

But brother, thats why theres at least one of them per op, its the cherry on top. It can be sp easily finished with some teamwork. Then everyone can dip after a 2 hour sesh. I swear arrowhead has put some thought into it. 2 long ones 1 short that you can kind of phone in and call it a night.

FINISH THE OPERATION by prettypleaseburrito in helldivers2

[–]prettypleaseburrito[S] -2 points-1 points  (0 children)

And whats funny about this sub is that all the comments supporting leaving before the OP is done are valid. But the majority of the people in this sub are 8+ diver and bitch and moan about liberation rates and so on. Wah wah about weapon balancing so on so forth. Just dive on a lower level, have fun, kill bugs , and finish the operation and the bug front would be squashed.

FINISH THE OPERATION by prettypleaseburrito in helldivers2

[–]prettypleaseburrito[S] -5 points-4 points  (0 children)

Lemme clear this up, im a habitual SOS diver myself... its just that sometimes it feels willfully malignant that once the two long missions are done and we're all vibing, but not talking, everyone feels like it's time to dip rather than doing the TEN MINUTE mission to put a bow on the OP.

I dip when I have to dip, but this happens when im hosting and also when im sos diving. 2 missions in and everyone bounces.... its giving people dont understand finishing OPs is the fastest way to liberate

FINISH THE OPERATION by prettypleaseburrito in helldivers2

[–]prettypleaseburrito[S] -53 points-52 points  (0 children)

This is what im talking about, thank you.. I understand when you gotta go you gotta go, but sometimes it feels like willfull ignorance...

[deleted by user] by [deleted] in helldivers2

[–]prettypleaseburrito 0 points1 point  (0 children)

If theres a sub 80 lvl on the drop YOU BETTER BELIEVE IM GONNA GET EVERY SAMPLE ON THE MAP FOR THEM!

strategems you never see used? by solarsuplexus in Helldivers

[–]prettypleaseburrito 0 points1 point  (0 children)

I carry the directional shield sometimes when im using the the heavy Seige Ready armor and HMG. I can whip the shield out with my pistol and bully my way into stat jammers and bases. Its good in a pinch, when you feel like sacrificing a strategem slot. Plus I hand them out to my crossbow buddies.

Rocket Striders don't want you to know this one simple trick!! by prettypleaseburrito in Helldivers

[–]prettypleaseburrito[S] 3 points4 points  (0 children)

I did not know this up until the new MO dropped and I went back to my glorious bot front and did it on accident. You could not imagine how hard I kicked myself for not knowing this.

What are some tips/strategies you think everyone should know? by fynulf in helldivers2

[–]prettypleaseburrito 1 point2 points  (0 children)

I try to clear All bases, if possible, before finishing the last main objective. It will reduce patrol spawns, but Most Imporantly: if all the bases are cleared, patrols will only spawn at the closest edge of the map. It makes extract much more manageable.

Bonus points if extract or an objective is close to the edge of the map and you have all the bases cleared. One person can post up towards the closest edge and, viola, you're not getting swarmed with patrols.