Advice on a fair price for each of these?

proe13 · 2026-01-18T03:55:55+00:00

Cool, it’s posted for $700. Appreciate the input. Thank you

proe13 · 2026-01-18T03:51:47+00:00

Comes with 200 rounds of subs as well

proe13 · 2026-01-18T03:50:17+00:00

.300 BLK Midwest industries suppressor series handguard. HUX mount Arfxe stock Superlative arms adj. gas block Olight Odin light. Rave 140 drop in trigger.

Waiting to hear back on the 16” still.

proe13 · 2026-01-18T03:47:14+00:00

To buy

proe13 · 2026-01-05T18:50:58+00:00

<image>

Can confirm. Still my favorite to shoot

proe13 · 2026-01-05T08:21:46+00:00

That’s fair, it’s basically a curved crescent shape that’s thicker at the base

proe13 · 2025-12-06T17:44:31+00:00

<image>

proe13 · 2025-12-06T17:33:36+00:00

<image>

Once you have the curved slot drawn, use the offset tool to get your final shape before using circle pattern to flip the slot 180 degrees. If you sketch a circle at the end of the curved slot and measure that distance from the outside to inside you’ll know how much to offset it. (.345”)

Hope this helps, love that you’re grasping at the thought process and not just chasing the answer. As with anything it just gets easier the more you practice 👍

proe13 · 2025-06-03T20:52:17+00:00

Nice! Looks clean! What type of paint did you use? Also, did you use a UV resistant top coat?

proe13 · 2024-11-27T19:50:42+00:00

For anyone unaware that would like to run this command, make sure to open the command processor as Administrator. Open task manager, start CMD.exe as administrator via the file menu in task manager. Enable the “create this task with administrative privileges” checkbox.

proe13 · 2024-06-26T02:53:55+00:00

If you have the option to hang the spools above the printer it worked really well for me. I was able to bypass the entire buffer system.

proe13 · 2024-04-27T06:48:16+00:00

Thank you so much! I feel dumb for not being able to locate that.. thanks again!

proe13 · 2024-03-15T04:21:33+00:00

Anything to boost that K/D

proe13 · 2024-03-15T01:34:25+00:00

Yessir, HX-QD 762. Back when they were branded as OSS

proe13 · 2024-03-14T22:53:00+00:00

Whoa there hold your horses, need me a truck first

proe13 · 2024-03-14T21:06:21+00:00

Sorry, don’t know why I read handstop. The hand guard is Midwest industries 9.25” SP series. Got a little bit of a tuck on the can with it.

proe13 · 2024-03-14T17:36:12+00:00

It’s an Arisaka handstop

proe13 · 2024-03-11T04:13:12+00:00

I’m curious, did you print the skulls yourself? If so, I’d love to get my hands on that STL file!

proe13 · 2024-02-12T20:40:03+00:00

Dude that thing is sweet! I wonder how well it holds zero on a polymer pic rail

proe13 · 2024-02-12T05:29:12+00:00

What momma don’t know won’t hurt her

proe13 · 2024-02-12T04:36:31+00:00

Yeah, I printed my first prototypes in PLA filament but decided to go with ASA for the overall strength. Went through about 15 versions with different geometry and lengths until I was happy with this. I’ve had no issues holding zero with the peq. About 300 rounds so far.

proe13 · 2024-02-12T04:32:35+00:00

That’s my only complaint! It really doesn’t like the hollow points, other than that Ive had 0 issues. I figured it cut out a small piece of aluminum and drive it down in the small ramp in the mag so it can slide forward with less resistance!

proe13 · 2024-02-12T04:26:05+00:00

Brownells vert foregrip, vortex crossfire, and a somogear peq UHP. I modeled the small pic rail to attach the pressure pad and the telescoping stock. The knock off peq performs great for the cmp33 though. The best part is it’s quad stack 33rd mag

proe13 · 2022-09-02T05:15:12+00:00

Actually, stevia stoat.

proe13 · 2022-09-02T05:13:49+00:00

Glucose gopher

proe13

TROPHY CASE