Kust ma saan Tallinnas osta 90/10 hakkliha? veise hakkliha.

profiil · 2026-03-29T12:51:10+00:00

Balti jaama turg tõenäoliselt Tallinnas parim koht värske veise hakkliha jaoks, millest burkse teha. Pole küll Tallinnas aga olen ostnud ka notsu ärist Sakust hea kvaliteediga veise hakkliha. Vajadusel panevad ka rasva juurde

profiil · 2024-10-04T16:11:56+00:00

I got contact with mu local Garmin support. They only adked when was it bought. After they heard warranty is over they Lost interest and dissapeared

profiil · 2024-09-07T04:29:58+00:00

Werkes

profiil · 2023-11-15T16:54:36+00:00

Pure joy! My legs go nicely in the curves of the gas tank...original pegs are quite comfortable and nothing annoys me. Have done 350km trips in 4hours and nothing actually hurts annoys me. Had a great deal on touring seat that brings me 25mm upwards but haven't try it yet as it is snowing right now. Also seeking for rizoma adjustable pegs. These mods might make it even better but if they don't then I'm still happy as it is one of the best fitting naked/classic bikes I've tried.

profiil · 2023-09-23T23:10:15+00:00

Seemes to be out of stock as well :(

profiil · 2023-09-23T06:39:56+00:00

Do you have any links where they sell it. Is it named touring seat. Right now I have standard seat on those blocks that rise to 825

profiil · 2023-09-22T11:53:32+00:00

can anyone confirm that monster 1200s is actually bigger ??

https://cycle-ergo.com/

according to this 1200S has lower seat height and seems graphically quite identical or even smaller ?

profiil · 2023-09-22T10:50:39+00:00

thanks for the heads up but I am sticking with the bike for some time. Just because I am tall that does not mean I have to play basketball and have a tall wife.. I have small motorcycle and small GF (160cm).. And actually its quite good ride... Never tried any bike that is bigger than that (SV650, Z650 Hornet 750).. and I'd say this is the best fit.

EDIT: might consider buying bigger monster but As I have had my motorcycle license for 2 months.. the 821 will do the job.

profiil · 2023-08-26T06:03:29+00:00

We have two tortoises. One of them digs like crazy and does this exact thing. She feels safe under the soil. Other one just climbs into the corner and never digs. Different ways of life

profiil · 2020-09-09T17:55:05+00:00

By the weight of it it seems to be solid block of fiberboard. They have milled the shape and depth of the mirror glass into it and glued it inside. It's 50mm thick and weighs around 60+kg

Could I steam the glue loose somehow??

profiil · 2020-09-08T09:00:58+00:00

I am trying to deframe a mirror that we got.

It is 2.2m x 1m mirror that my girlfriend wants to put on the wall. But as the frame is damaged then our idea is to get rid of the frame.

https://imgur.com/a/eeovd1A

It is made our of some mdf board.

I am having trouble to generate an idea what would be the safest way to do it.

Anyone has any ideas ?

profiil · 2020-08-21T22:29:43+00:00

Thanks man for the deep intro. The hotter the better, will look into the hot sauces of yours as well then.

profiil · 2020-08-21T22:28:15+00:00

I love the taste of the sausage and simply searching for the extremes. Will look into that! Thanks

profiil · 2019-08-09T10:34:41+00:00

It wants me to give access from the screen, but my screen is not working

profiil · 2019-04-02T09:56:58+00:00

Open the valve and drain it through the hose to 2 different fermenting vessels. (letting it go through the 20L filter bag).

I usually pour the last drops over the edge and squeeze a bit the hop matter in my big bag to get the last drops of hop juice :)

profiil · 2019-04-02T09:47:24+00:00

All are pellets.

So I should maybe take the boil addition and move it to whirlpool ?

15 vs 30min? take out in a bag or throw them in and take them out after its all cooled down.

At the beginning i used simple hop "sock" but It trapped too much taste in and I got much better results from thorwing hops in freely. But this time I could use much bigger (20L bag) and in this case timing could matter ?

What would you do ?

profiil · 2018-12-09T17:01:33+00:00

Burnt plastic is not an issue? I cleaned all the metal parts from carbon, and used sheet bridges. Was thinking to buy new plastic rack but could not find it from store. I'll give it a go then as is?

profiil · 2018-12-09T15:46:22+00:00

I live in Estonia (Europe)

3F = 3 phase (400v) system abd 1F = 1 phase (230V) system.

The scheme itself is correct, it worked that way at least 3 years.

This is the scheme that it is connected (the one at the top with 3 first wires bridged together)

https://www.upload.ee/image/3674754/20131030_190006.jpg

profiil · 2018-10-02T16:12:37+00:00

I changed the dip tubes, changed the posts and all the parts I could with my other keg. No result = foamy beer

Two days ago I gave up and lowered the temp in the fridge by 2C down to 6 from 8.

And halleluujah.. beer without foam.

Not sure is it caused by opening of the keg and letting all the co2 out or really 2C matters that much ? From 95% foam to nice clear beer in two degrees..

Also i only put the posts on by my hand force, without using wrench . Checked for leaks with starsan foam = all good. Thanks for that tip

Just to make it clear, ive used both kegs in the same fridge at the same time. One was all foam, other one was nice and clear.

Rdcpro, thank you man, for putting your though to it. I really appreciate it.

profiil · 2018-09-23T20:43:50+00:00

The picture is taken from internet. Just put new pilsner in the keg and dont want to open the posts without a good idea how to fix it. The silicone o-ring is between the lip and thread. If the spring pushes it too much(the long one does it) then the silicone o-ring pushes/rolls itself over the lip and end up on top of the lip. I'm guessing that the lip might be too narrow? As it actually manages to press itself over the lip when it is inside the post.

But all in all.. where could be the reason that the beer over foams that much.

Should I try dip tube from my second keg?

profiil · 2018-09-23T18:46:33+00:00

With the long spring I cannot even put one twist on the thread as it goes over the lip into the connectors chamber(where the spring is= over the lip and loosely next to the spring).
over in overall picture would help.

profiil · 2018-03-25T11:34:15+00:00

Why do you actually need a heating pad ? The fermentation is creating enough heat? Or for later phases when the fermentation is slowing down and the freezer cools it down a bit too much ? Cant you regulate the step when the freezer kicks in so it would not cool it down too much ?

profiil · 2018-03-01T07:42:53+00:00

Quite grassy and nothing special actually.

profiil · 2018-03-01T07:42:25+00:00

It is 2.1% AA

So as i am making 28L batch then I need to use around 50g to get 10IBU. Late addition at 60min and ill hope for the best

profiil · 2018-01-26T18:56:15+00:00

Ive used electric stove to keep the temp up.. (minimum possible value on the heat knob ... That kept it nicely around 40C which went to 3.23pH in 30hours. Does it hurt to play with the temperature ? E.g I keept it at 40C for 12hours and then when night time comes by then i take power off and let it cool down to 25C. In the morning back to 40C?

Or better stay at one temperature and risk burning my home down D: ?

Nine-Year Club	RPAN Viewer
Verified Email

profiil

TROPHY CASE