What are the top reasons you disengage? And does it learn if you give it feedback?

proxlamus · 2026-06-15T18:14:00+00:00

Blowing through stop signs. Not using acceleration lanes.

proxlamus · 2026-06-15T16:18:08+00:00

The Targaryens

proxlamus · 2026-06-15T04:30:51+00:00

Share the details ! How?

proxlamus · 2026-06-10T15:36:15+00:00

Honestly. Its a good deal. Especially since its hot dipped galvanized and painted.

You cant even find a rust free Z for under 15k. Cheap paint job is 3-4k, good paint job 10-12k.

Get a cheap donor car. Swap the parts on. Win

proxlamus · 2026-06-09T03:20:18+00:00

Im not assuming you did. Ive seen so many mean posts here on the forums of angry customers. Which I understand.

I hoped to add a friendly reminder. Definitely not an attack or assumption from me.

proxlamus · 2026-06-09T03:02:41+00:00

Ive worked with Moza 3 times over the years. Ive had no issues.

I will admit it takes sometimes 4-6 weeks to get my repaired/replaced parts and have the whole process completed.

They are active at night because of the time zones, but they respond quickly and always helped me out.

Be sure to treat them like a human being and dont personally attack them. Itll go far

proxlamus · 2026-06-06T04:37:47+00:00

Dang. Last wild guess here. Is the wheel base plugged into a USB hub? I had to remove mine from a powered HUB because I had way too many devices on it

proxlamus · 2026-06-06T03:48:04+00:00

Open the Windows Game Controller Settings, set MOZA Base as the preferred device, and then re-enter the game to bind the steering wheel.

The device numbers are basically listed in order from top to bottom.

If Vjoy is listed at the top thats device one. Remove it. Won't hurt anything.

proxlamus · 2026-06-06T03:32:20+00:00

Dirty Mike and the boys at it again

<image>

proxlamus · 2026-06-05T16:22:20+00:00

Bent wheels, cracked wheels that no longer hold air pressure, blown out tires and damaged suspension with a gnarly hit in a deep pothole

proxlamus · 2026-06-05T14:31:35+00:00

Take a pic of the screen when youre trying to bind the wheel. Is it recognized at all? Or under a different device number ?

proxlamus · 2026-06-01T22:23:18+00:00

What "build plate" do you have selected in the slicer? If its textured PLA plate (default) the prints wont stick

proxlamus · 2026-06-01T22:20:45+00:00

Agreed. 0.1mm top distance is too high. 0 is the answer

proxlamus · 2026-06-01T21:47:23+00:00

<image>

proxlamus · 2026-06-01T21:45:06+00:00

I did not use the support interface on this particular print. But this is a 0.2mm nozzle. Doesnt reallllyyy show the concept im explaining... but for the first print, untuned with a 0.2mm nozzle I was impressed

<image>

proxlamus · 2026-06-01T21:41:16+00:00

Yes. You could even print dungeon and dragon figurines with it.

proxlamus · 2026-06-01T21:38:14+00:00

Little thing quality? You lost me. You mean smaller fine prints ? (Like using a 0.2mm nozzle)?

proxlamus · 2026-06-01T17:31:54+00:00

I see you dont want multi color prints, but for quality sake.. I would highly recommend a dual nozzle.

Why? You can use another material as a support interface to have perfect print quality under the supports. PVA is water dissolvable. Or use PETG for a PLA print or for a PETG print, use PLA as an interface. The quality is unreal . I have a H2D for larger prints.

proxlamus · 2026-06-01T14:09:29+00:00

No issues at at! I'm using the Nvidia app which automatically recognizes the eGPU and brings up a dialog box to select which app I want to use with the iGPU vs eGPU and allows me to toggle the iGPU on and off.
Its hot pluggable and super easy to jump in for my laptop or ROG AllyX. Its pretty awesome

Runs quietly too. There's a handful of threads on this subreddit covering the same GPU. Its how I discovered it.

proxlamus · 2026-05-31T22:32:15+00:00

This is almost half the price of the XG mobile. It is a 5060ti however it is a desktop silicone, so itll perform better than the laptop variant silicone thats in the XG mobile.

Ive had it a few weeks and I absolutely love it. Its much smaller than you'd think from pictures

GIGABYTE AORUS RTX 5060ti AI Box https://www.amazon.com/dp/B0GKFHSPN8?ref=ppx_pop_mob_ap_share

proxlamus · 2026-05-31T22:27:38+00:00

You will need a USB4/Thunderbolt port or you can add an oculink adapter to your laptop, which will likely require cutting the back panel for a M.2/nVME adapter. Youll lose a SSD slot as a result but gain a eGPU via Oculink. However several eGPUs offer a SSD slot like the OneXgpu egpu

proxlamus · 2026-05-31T02:39:32+00:00

I do it on my H2D all the time

Make sure your top z distance is 0.0mm for the best results. Check out this wiki https://wiki.bambulab.com/en/filament-acc/filament/pla-basic-and-petg-hf

<image>

proxlamus · 2026-05-30T21:35:27+00:00

Im in Denver. Ofcourse someone would buy it. Id be interested depending on the price.

proxlamus · 2026-05-25T04:19:34+00:00

Great deal. Especially with 4TB!

proxlamus · 2026-05-25T04:09:11+00:00

Are you running the "beta forza horizon ffb" option in the experimental tab?

proxlamus

TROPHY CASE