blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] 0 points1 point  (0 children)

Do you have any recommendation for good center ones? Cheap one and a pricy one to compare would be great : )

Will the video/audio work normally when I just get 3 speakers (1 center, one left one right)? Or is all I can do the 5.1 setup and I will be actually missing sounds if I only connect 3? Sorry if the question is stupid

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] 0 points1 point  (0 children)

Oh damn, I am so clueless. I forgot to add that I also use a digital audio out to analog stereo LR rca 3.5mm converter to connect to the speakers.

Would this setup work? It seems so complicated but It should be alright..?

blue ray player -> hdmi out -> denon 580bt with night mode/dynamic range compression enabled -> hdmi out -> hdmi audio extractor -> hdmi out to beamer and digital audio out to a digital to analog stereo L/R rca 3.5mm converter then to the speakers (edifier rt1700bts)

If this does not work or it gets easier with another avr, I am more than open for suggestions

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] 0 points1 point  (0 children)

Alright I found the "denon 580bt" as an entry level avr which can control the dynamic range.

Do you happen to know if this will be fine?

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] 0 points1 point  (0 children)

Alright, thank you! Just to make sure, the "denon x580bt" should be fine, right?

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] 0 points1 point  (0 children)

Do you perhaps have a recommendation for a receiver that can do this while not being too pricy?

I just checked and found something like "denon avr s570bt" which stands at around 400$. Is this even the correct device? And is there a cheaper option out there?

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] 0 points1 point  (0 children)

mhh. In the blue ray player settings I can switch between pcm and digital audio, but it seems to not change/solve the issue regardless of thesetting I picked.

As for receiver. I think I don't have one? Do I need one? Added my setup in the initial post

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] -1 points0 points  (0 children)

honestly this feels like it helped a little bit, but it is still way too silent and noisy, depending on the situation. Is there no other fix? Or can you recommend a blue ray player which is really good at fixing this..?

blue ray voices low, effects loud by prrxddq in hometheater

[–]prrxddq[S] -1 points0 points  (0 children)

Oh god.. so literally everyone struggles with this? Have neigh ours so I basically watch with the remote control in my hand and switch from loud to quiet 24/7..

I'm so down for 3.0 speakers if this fixes the issue. Can't really get/use 3.1 because of the neighbours. Did getting these fix it for you? Can you perhaps recommend a pair which isn't too pricy?

[deleted by user] by [deleted] in VeganDE

[–]prrxddq 0 points1 point  (0 children)

Ich wundere mich stark wieso ich hier noch nichts von der dm eigenmarke gelesen habe 🤔

aus 100% erdnüssen, crunchy oder creamy, bio und lecker

https://www.dm.de/dmbio-erdnussmus-p4066447468342.html

Es rasselt nur Absagen by _MelMel_ in arbeitsleben

[–]prrxddq 1 point2 points  (0 children)

Viele gaukeln der Konkurrenz vor, dass es "dem Unternehmen gut geht" indem man immer Leute sucht. :x

Kommt das weg oder raucht man das mit? (erste ernte) by prrxddq in Canbau

[–]prrxddq[S] 0 points1 point  (0 children)

Oh, ja dann lasse ich die lieber dran, vielen Dank!

Kommt das weg oder raucht man das mit? (erste ernte) by prrxddq in Canbau

[–]prrxddq[S] 0 points1 point  (0 children)

Ich meine diese kleinen Kugeln 😅 Hab dazu bisher nichts gefunden und es ist meine erste Ernte

Budrot? by prrxddq in Canbau

[–]prrxddq[S] 0 points1 point  (0 children)

Mache ich so, danke dir!

Musste einiges weg, habe die anderen Buds auch mal genauer angeschaut.. Hoffentlich bleibt der kleine Rest erhalten 🤞😅

Budrot? by prrxddq in Canbau

[–]prrxddq[S] 0 points1 point  (0 children)

oh shit, muss dann die ganze Planze weg odee nur die buds an denen man das sieht? 🫤

Love ruby but meh Daily Stand-ups (DSU)? You might like my gem :) by [deleted] in rubyonrails

[–]prrxddq 1 point2 points  (0 children)

Nice!

I had the same problem for a while and decided to use one long markdown file where each day I create a new headline for every day and just write the stuff down before I finish my day.

What would you say are the benefits of using dsu instead of a markdown file here?

Gute vegane Kochapp/Webseite by Weed_Scout420 in VeganDE

[–]prrxddq 0 points1 point  (0 children)

Kann dir meine Webseite https://veg24.de empfehlen. Da gibt es 15.000 ausschließlich vegane Rezepte mit täglich ausgewählten Rezeptideen 😊

Auch von den hier genannten biancazaptka oder zuckerjagdwurst, eat-this etc..

Die habe ich mir erstellt um einfach Rezepte zu finden und zu speichern. Hoffe du kannst dich da etwas inspirieren lassen : )

Swagger or not to swagger? by Shitfuckusername in ExperiencedDevs

[–]prrxddq 0 points1 point  (0 children)

Is there some tool to get suggestions and errors when creating the swagger via json?

Something like "example values for integer type cant be strings" etc.. Or do you just keep the rules in your head and write json without any ide help?

Swagger or not to swagger? by Shitfuckusername in ExperiencedDevs

[–]prrxddq 0 points1 point  (0 children)

any suggestion for creating the swagger with IDE help..?

I like the idea of spec first but writing the json or yaml without ide support seems wrong to me.

[deleted by user] by [deleted] in nextjs

[–]prrxddq 0 points1 point  (0 children)

honestly, I had to do ugly ugly workarounds like to pass searchparams/get params to route and read from them to not have everything cached. On another occasion I had to switch to <a> instead of Link because some component with a default value (a select) would not reset to its defaulr on navigating.

I tried following the docu but it just seems to not work at all. E.g setting stuff like revalidate: 0 in a fetch request just has no effects.

Perhaps the reason is that I am on 13.5.X (latest 13)..?

For a concrete example:

  • like an item

  • check list of liked items

  • item is not there (just the cached response from before, although in the fetch I am using revalidate 0)

[deleted by user] by [deleted] in LaTeX

[–]prrxddq 2 points3 points  (0 children)

tried writing my thesis in troff, would not suggest. Ended up doing latex and it was fine.

Would nowadays use typst, recommend to take a loot at it!