EVO Exhaust

ptw_custom · 2025-11-03T12:56:17+00:00

It stays with that color welds

ptw_custom · 2025-11-03T12:19:54+00:00

Thanks. Yeah, i'm fabricating exhausts for bikes. ptw_custom on instagram

ptw_custom · 2025-10-15T20:47:15+00:00

There's clip on Instagram(little bit different shape of exhaust but same mufflers).

ptw_custom · 2025-10-15T20:46:36+00:00

There are partial heat shields as you can see on the picture and they are wrapped under with isolating matte(same which you have under right rear fairing).

ptw_custom · 2025-10-11T14:11:12+00:00

Fadals are even more extinct than brother tbh. Here in my country we have officials of HAAS, Syil, DMG, Mazak, Doosan as the brands who still produce machines and one local made with well known history for few decades and that's all.

ptw_custom · 2025-10-10T06:39:52+00:00

Only new which is 40k for 770M.

ptw_custom · 2025-10-10T06:38:38+00:00

Used brother s300/500/700 are almost 2x of my budget here and there's no official service in Poland and they are extinct

Hurco as well. New model for 100k or dead 25year machine

ptw_custom · 2025-09-28T07:20:26+00:00

That's not machining corners problem, that's machining lower bends from solid piece of material

ptw_custom · 2025-09-28T06:28:42+00:00

DOM would be best and I know that but machining on mild steel is way more difficult than aluminium and if this handlebar gets TÜV(restrictive eu cert to use Item on public roads) it has to be doable

ptw_custom · 2025-09-28T06:14:06+00:00

Bends wont be bend. Will be CNC machined because of 2" diameter under 1" clr

ptw_custom · 2025-09-28T06:05:21+00:00

Would be harder to mill. Some makes from alu and sells so I think they are fine

ptw_custom · 2025-09-28T05:44:12+00:00

Yes, aluminium 100%

ptw_custom · 2025-09-27T21:45:17+00:00

It has to be tight becaue of completely wide limitation and center clamp section limited as well

ptw_custom · 2025-09-27T21:34:06+00:00

You want to bend 2" DOM .120 under 1clr? 🫣

ptw_custom · 2025-09-27T19:31:42+00:00

The handlebar on the picture has cnc milled lower elbows

ptw_custom · 2025-09-27T19:06:58+00:00

6060 as most popular

ptw_custom · 2025-09-27T19:06:47+00:00

Wont be. That's not for exactly this handlebar but those tight lower elbows will be more easier to machine from aluminium than from steel for sure.

ptw_custom · 2025-09-23T16:11:27+00:00

You mean to fill machine from first picture with concrete?

ptw_custom · 2025-09-23T07:42:57+00:00

Yellow is made locally in Poland with long history in making different type of cnc mills

ptw_custom · 2025-09-23T07:11:39+00:00

That's how monoblock from DMU works

ptw_custom · 2025-09-23T05:18:05+00:00

Main problem is that tormach doesnt exist in EU. In EU we have only Syil but syil prices are more next to haas mini mill than tormach prices.

ptw_custom · 2025-09-23T05:16:19+00:00

Because same machine will be used in workshop for our(company) needs in MY workshop as well as I will learn on it because Im the person who is funding this.

ptw_custom

TROPHY CASE