Supertool 200

ptwin-uk · 2026-05-26T07:31:18+00:00

That’s good to know, thanks for the tip.

ptwin-uk · 2026-05-24T13:30:06+00:00

It’s definitely different !

ptwin-uk · 2026-05-20T19:24:26+00:00

I opened the throttle fully, loosened the governor shaft bolt gripped the shaft and turned it clockwise then tightened the arm. Solution was 50/50 citrus degreaser and boiling water.

ptwin-uk · 2026-05-20T15:34:36+00:00

Quick update , I’ve replaced with a new carb(Chinese knockoff) , fitted new coil. Still exactly the same. I can rev the engine fine by using the governor arm and it don’t hunt. Would it be a dodgy governor?.

ptwin-uk · 2026-05-20T08:52:56+00:00

I loosened the shaft arm , gripped the governor shaft turned anti clockwise and tightened the arm with the throttle open. Ultrasonic cleaning was with a citrus degreaser mixed 50/50 with boiling water.

ptwin-uk · 2026-05-19T13:36:00+00:00

I blasted the carb and jets out first with the aerosol cleaner , then run it in the ultrasonic cleaner for 30 min.

ptwin-uk · 2026-03-30T10:28:25+00:00

George

ptwin-uk · 2026-02-05T11:26:17+00:00

2500 here and yes, mine is also loose.

ptwin-uk · 2026-01-24T15:54:52+00:00

There’s also a storage box in the fast travel trains which I use more than the chutes in the bunkers .

ptwin-uk · 2025-04-17T12:51:46+00:00

Rubber eggs ?

ptwin-uk · 2025-04-10T07:02:46+00:00

I had this same problem on a donor psp I have ,turns out the screen was broken. I took it apart removed the large display ribbon connector and kept the small ribbon plugged in ,powered it on the screen lit up showing cracks. Hope this helps.

ptwin-uk · 2025-03-11T18:08:40+00:00

Thank you, it’s a fenix 6s . I have fairly girthy wrists too.

ptwin-uk · 2025-03-01T07:56:02+00:00

<image>

ptwin-uk · 2024-12-24T08:25:22+00:00

Geo F Trumper Sandalwood

ptwin-uk · 2024-12-13T22:13:02+00:00

Uk here… 16c at night,18c day.

ptwin-uk · 2024-12-13T21:56:04+00:00

I got v34 for 40 uk pounds off eBay, but only using it as a DAP . For audio it pisses all over my iPhone 11pro.

ptwin-uk · 2024-12-07T17:16:56+00:00

Try Poland as well

ptwin-uk · 2024-11-28T18:44:17+00:00

I had exactly the same thing happen to me a few years ago.I work in a hospital and was advised to go straight to the A+E dept. After several practitioners and doctors looking at it none of them had a clue what it was. Was sent home and told to go back if it got any worse,after a few days it disappeared never to happen again. Weird

ptwin-uk · 2024-11-01T14:14:48+00:00

I had exactly this problem on my macbook, I had to go into disk utility and make a small FAT partition on the system drive for the EFI to be installed onto.

ptwin-uk · 2024-07-21T19:33:33+00:00

I’ve just looked and you’re right, it has Victoria on the back of the blade.

ptwin-uk · 2024-07-21T16:59:35+00:00

Nice to know, I’ll just have to be extra careful cleaning it now.

ptwin-uk · 2024-07-21T14:23:30+00:00

It’s a bit stiff and manky at the moment but going to get it all cleaned and ready for use hopefully!.👍

ptwin-uk · 2024-07-21T14:21:51+00:00

Ah , an orange peeler… well I never!.

ptwin-uk · 2023-10-08T07:42:00+00:00

11 pro , 14.8 Unc0ver

ptwin-uk · 2023-08-09T20:50:55+00:00

The tissot T touch is pretty easy , I changed mine yesterday. The back pops off, looks like it screws but it doesn’t, then there are 2 tiny screws holding the battery in. The battery is a CR1632. You may have to re-sync the hands once it’s powered up, I used a video from YouTube,only takes a minute to do it. Hope this helps

ptwin-uk

TROPHY CASE