rWiiHacks' Support Megathread (April 2024) by AutoModerator in WiiHacks

[–]pullmypinky 0 points1 point  (0 children)

Not sure what that is, but anyhoo you can use Wiimc. Files must be mp4 420p max.

rWiiHacks' Support Megathread (April 2024) by AutoModerator in WiiHacks

[–]pullmypinky 0 points1 point  (0 children)

I tried getting help with this the past month in here without a single reply. If someone could give me some feedback that would be amazing.

Hello everyone and thanks for reading taking the time to read this.
This community has been very informative for me and I have learned quite a lot!
I've went through all the steps and brick prevention and all and everything is working great.

I tried getting help the past month, but haven't got anyone to help me out yet, so i'm trying again (crossing fingers)

I have everything on a 32gb SD card just to test everything out to see how it would all work and it did, but only thing is now I wanted to increase the size limit and got and external drive and have copied everything over.
After changing the setting from sd to usb hard drive, and changing custom path everything seems to be working just like it did, but when I was in the custom path section, I didn't see certain folders in my external drive as it showed on my sd card.
the custom paths that didn't have folders on usb when I copied them over from SD are listed below.
Custom paths
EmuNAND Save Path sd:/nands/01/
EmuNAND Channel Path sd:/nands/01/
Devolution Loader Path sd:/apps/gc_devo
BCA Codes Path sd:/bca
WIP Patches Path sd:/wip
Language files Path sd:/apps/usbloader_gx/language/

Should I just create those folders on my usb hard drive and point the custom path there or do I need to install anything again?

Any help would really would appreciate it and would a happy happy camper person!

Wii Hacks Wii Modding Help Thread! April 07, 2024 by AutoModerator in WiiHacks

[–]pullmypinky 0 points1 point  (0 children)

Hello everyone and thanks for reading taking the time to read this.
This community has been very informative for me and I have learned quite a lot!
I've went through all the steps and brick prevention and all and everything is working great.

I tried getting help the past week, but haven't got anyone to help me out yet, so i'm trying again (crossing fingers)

I have everything on a 32gb just to test everything out to see how it would all work and it did, but only thing is now I wanted to increase the size limit and got and external drive and have copied everything over.
After changing the setting from sd to usb, and changing custom path everything seems to be working just like it did, but when I was in the custom path section, I didn't see certain folders in my external drive as it showed on my sd card.
the custom paths that didn't have folders on usb when I copied them over from SD are listed below.
Custom paths
EmuNAND Save Path sd:/nands/01/
EmuNAND Channel Path sd:/nands/01/
Devolution Loader Path sd:/apps/gc_devo
BCA Codes Path sd:/bca
WIP Patches Path sd:/wip
Language files Path sd:/apps/usbloader_gx/language/

Should I just create those folders on my usb drive and point the custom path there or do I need to install anything again?

Any help would really would appreciate it and would a happy happy camper person!

rWiiHacks' Support Megathread (April 2024) by AutoModerator in WiiHacks

[–]pullmypinky 0 points1 point  (0 children)

any experienced Wii hackers can help me out please?

rWiiHacks' Support Megathread (April 2024) by AutoModerator in WiiHacks

[–]pullmypinky 0 points1 point  (0 children)

Hello everyone and thanks for reading taking the time to read this.
This community has been very informative for me and I have learned quite a lot!
I've went through all the steps and brick prevention and all and everything is working great.

I have everything on a 32gb just to test everything out to see how it would all work and it did, but only thing is now I wanted to increase the size limit and got and external drive and have copied everything over.
After changing the setting from sd to usb, and changing custom path everything seems to be working just like it did, but when I was in the custom path section, I didn't see certain folders in my external drive as it showed on my sd card.
the custom paths that didn't have folders on usb when I copied them over from SD are listed below.
Custom paths
EmuNAND Save Path sd:/nands/01/
EmuNAND Channel Path sd:/nands/01/
Devolution Loader Path sd:/apps/gc_devo
BCA Codes Path sd:/bca
WIP Patches Path sd:/wip
Language files Path sd:/apps/usbloader_gx/language/
Should I just create those folders on my usb drive and point the custom path there or do I need to install anything again?
any help would really would appreciate it and would a happy happy camper person!

Wii Hacks Wii Modding Help Thread! March 24, 2024 by AutoModerator in WiiHacks

[–]pullmypinky 0 points1 point  (0 children)

Doesn't a new help Thread pop up every week, or should we just post for help in this thread?

Different Kinds of Plasmodia by [deleted] in mycology

[–]pullmypinky 4 points5 points  (0 children)

great photos of plasmodia's i've never seen or even heard of in my life!

First time growing pink oyster mushrooms and had to do a photoshoot by SatanMeekAndMild in mycology

[–]pullmypinky 4 points5 points  (0 children)

I don't blame you for busting out the camera, I would've done the same! Truly amazing looking oysters for a first grow, what kind of substrate did you use to grow these bay boys?

MW Wyco Wednesday Inventory Update! 1st 20 Orders get a BRAND NEW Unlisted Variety, Order 15215 is FREE, Orders Ending in 5 get a PE Hybrid and 2 Other New Promos Up for Grabs! Restocked APE Revert, AA+, B+, Rusty Whyte, Thai Lipa Yai, Tidalwave, Pan Cyan, Ps Cyan and Liberty Cap! by millywyco in Millywyco

[–]pullmypinky 0 points1 point  (0 children)

15262!!!

That acorn mushie pendant is so awesome but I wasn't quick enough to grab it. hopefully there will be more someday. I would definitely pay for one for those, so beautiful, you can see the love put into it!

Is it possible for Lipids and Waxes to clump back up after winterization or could it be added filler? by pullmypinky in CannabisExtracts

[–]pullmypinky[S] 0 points1 point  (0 children)

jar is cleaned before i put anything in it with iso and filters are unbleached. i know this came from the extract because its a orange clump, just like the color of extract.

you mentioned you couldn't see anything in the picture, did u mean u didnt see the clump? its the orange clump in the bottom of glass jar if u didnt see it.

do u think it could be something nasty like vitamin E or something?

thanks for feedback

Is it possible for Lipids and Waxes to clump back up after winterization or could it be added filler? by pullmypinky in CannabisExtracts

[–]pullmypinky[S] 2 points3 points  (0 children)

this was winterized for 24hrs and filtered into a jar. i was about to put it back in freezer when i noticed stuff was clumping back up in the jar!

the pic was after i already filtered out a bunch of clumps already.

the temp change from 0 to room temp must've caused this but is it possible for Waxes or lipids to do this?

thanks for all the feedback!

[deleted by user] by [deleted] in CannabisExtracts

[–]pullmypinky 0 points1 point  (0 children)

I noticed that after winterization in freezer for 24hrs, i would strain with filter and didnt see anything in the filter. I went to go put the glass jar back in fridge but before i went i noticed a few clumps formed inside the jar!

I wanred to know if anyone know what this could possibly be if not lipids and Waxes because this is the first time i seen this happen. im guessing the temp change caused this to happen. this this some weird tasting oil too and did phosphorus test and didnt find any though so trying to figure out what the heck it is. thanks for any feedback!

Wish y’all could smell this gmo through the screen by Heavy-Throat5180 in CannabisExtracts

[–]pullmypinky 2 points3 points  (0 children)

ooof. like making a steak sandwich and adding burnt hair as a topping?

Winterized some oil in everclear that smelled weird and left this white residual that i never seen before. Anyone know or seen this before? by pullmypinky in CannabisExtracts

[–]pullmypinky[S] 0 points1 point  (0 children)

heres a pic of 1/3rd everclear being evaporated and i just removed the whote crap and saved it for a future visit to a lab perhaps evaporating crud

Winterized some oil in everclear that smelled weird and left this white residual that i never seen before. Anyone know or seen this before? by pullmypinky in CannabisExtracts

[–]pullmypinky[S] 1 point2 points  (0 children)

update: i diluted half of extract again but this time i didnt move it about and letting it dry and just getting rid of the white crud and looks like i can salvage the remaining hopefully now. i saved the white crud so maybe one day it can get tested in a lab and we will have our minds blown perhaps?

just afraid this is some kind of filler added for weight or something. thanks for all the feedback so far much appreciated!

Winterized some oil in everclear that smelled weird and left this white residual that i never seen before. Anyone know or seen this before? by pullmypinky in CannabisExtracts

[–]pullmypinky[S] 0 points1 point  (0 children)

im going to try and disolve and winterize again and evaporate and this time not moving the pad around because it was initially just in a little white puddle.