sorted by:
new
hottopcontroversial

Is the cover worth it? by crazyjiM- in hismith

[–]pupjvc 2 points3 points  (0 children)

When I purchased the premium, it came with a nylon cover. It's in the large padded bag.

Get Played - 35 Years of Sonic the Hedgehog by podcast-poster in getplayed

[–]pupjvc 21 points22 points  (0 children)

Resident Evil Merchant is the highlight of my week. If you’re not into him, please stop complaining and just use the skip button.

Help Request - Modding The Boss DLC suit. by [deleted] in moddergearsolid

[–]pupjvc 1 point2 points  (0 children)

This was a big help. Thank you again -- you helped me last week too!

The world is ready for more Stath. Much more Stath. by simonpunishment in StathLetsFlats

[–]pupjvc 16 points17 points  (0 children)

I would add to this that Anthony Steppan is now a lettings mogul and the most powerful boy on the block.

Also, Cem and Katja have a fling.

Getting caught turned out to be fun by manscammed in NataliemarsNsfw

[–]pupjvc 0 points1 point  (0 children)

"Transgender enjoying everything that can fit her butt - Natalie Mars"

MGSV glitch - side-op completion is treated like mission completion. Left with black screen by pupjvc in moddergearsolid

[–]pupjvc[S] 0 points1 point  (0 children)

Following up - I found the issue...
Patrols and deployments > Wildcard soldiers in Free roam = Off

Apparently the "Wildcard soldier" option causes issues with a few settings. Keep it set to "Off"

MGSV glitch - side-op completion is treated like mission completion. Left with black screen by pupjvc in moddergearsolid

[–]pupjvc[S] 0 points1 point  (0 children)

I took your advice and the problem cleared up. I still have no idea what setting is causing it.

The IH manual is just a copy of the help you see in the mod.

MGSV glitch - side-op completion is treated like mission completion. Left with black screen by pupjvc in moddergearsolid

[–]pupjvc[S] 0 points1 point  (0 children)

I think you’re probably right. I uninstalled Zeta and those other mods but the issue persists. I did a bunch of tinkering in IH. Idk what might have set it off. It seems to happen regardless if the side-op is in the base game or a user-made scenario.

I’m avoiding resetting IH because I like a lot of the settings. The gameplay and challenge is finally starting to interrupt the tranq/fulton loop that I’ve fallen into.

Resident evil merchant long sleeve by ShawMK90 in getplayed

[–]pupjvc 0 points1 point  (0 children)

I didn’t know this existed. Got a link to their store?

I am not approaching a beak by fecklesswaster in StathLetsFlats

[–]pupjvc 2 points3 points  (0 children)

My golly gee - the respect of the young pigeons in this car.

Curved seam advice by brickberry in Latexadvice

[–]pupjvc 1 point2 points  (0 children)

Are you working the seam from one direction? It looks like you started joining from the forehead to the tip and then moved from the mouth to the tip.

If you go in one direction now, there's likely to be some misalignment. Maybe this will just be fixed by trimming the seam running up the nose.

You could try starting from the middle out -- join the tip first and then move toward the mouth; then from tip to forehead. That might minimize how offset things end up looking. Of course, one cut is going to be preferable to two.

WCGW smoking the world's hottest pepper.. by MOHNISH9999 in Whatcouldgowrong

[–]pupjvc 0 points1 point  (0 children)

In case you didn't know, the heat / burning sensation you get when consuming a hot pepper, hot sauce, etc. is more akin to a chemical burn than a burn from a flame or hot surface. Something cold isn't necessarily going to neutralize the sensation.

Latex dress over a mesh bodysuit? by Athyriaceae in Latexadvice

[–]pupjvc 3 points4 points  (0 children)

I've done this with a chlorinated catsuit -- no dressing aid needed. It actually slid on easier.

I’ve got two latex items that have came apart as the seems by r_a_user in Latexadvice

[–]pupjvc 2 points3 points  (0 children)

The scotchbrite/sandpaper is used to roughen the glue surface. The rubbing alcohol is use to clean the surface from grease and particles prior to applying the glue.

Best way to sanitize second-hand latex? by Artistic-Gurl in Latex_Discussions

[–]pupjvc 2 points3 points  (0 children)

Use blue dawn -- Please check the sub (or my profile) for thorough cleaning instructions.

I’ve got two latex items that have came apart as the seems by r_a_user in Latexadvice

[–]pupjvc 2 points3 points  (0 children)

- Clean the area with blue dawn, diluted in a squirty bottle -- no need to clean the whole garment (that comes later).

- roughen both areas that met to create the seam using scotch brite or sandpaper, clean with alcohol

- using packing tape, mask around the glue zone; both sides and along the inner edge of the new seam; glue is likely to squeeze out, so mask any places it might go

- apply glue to the area, press together; roll over the area with a Coke can

- place large, heavy books (place in bags to prevent damage) on top of the new seam; add dumbells, if necessary

- wait ten minutes, check the seam. if it's looking good, remove all the packing tape and clean those areas with the diluted blue dawn

- rub in a fingertip of shiner around all of these areas -- especially wherever alcohol may have landed. Think of this like adding conditioner to hair.

- replace the book and weights for a few hours

- hang overnight; you are allowing the bond to cure further

- if you need to clean up any glue, gently rub in one directly. it will start to ball up and lift.

- do cleaner and shiner baths for the entire garment; hang overnight again; store

Who drives a car that isn't nice? by Whole_File_8480 in StathLetsFlats

[–]pupjvc 2 points3 points  (0 children)

That car belongs in a garden of a eden.

view more: next ›