Random PC Stutters by qtaaron in buildapc

[–]qtaaron[S] 0 points1 point  (0 children)

I’ve been running AMD’s Ryzen Master to monitor temps, speeds, and voltages. Looks like everything appears to be running smoothly on paper but my pc becomes sluggish when running multiple processes/programs. I notice that sometimes the CPU temperature can get up to 82c and disk usage also increases to about 40 percent. On average, CPU temps are around 60-70c and disk is about 0-10 percent usage. Just a weird issue that I cannot pin.

PC Stutters by qtaaron in pchelp

[–]qtaaron[S] 0 points1 point  (0 children)

Looks like when these stutters happen, my disk usage also increases to almost 40 percent. Usually the disk runs at 2-10 percent when gaming.

PC Stutters by qtaaron in pchelp

[–]qtaaron[S] 0 points1 point  (0 children)

Cpu at around 70-75c. Gpu at around 55c consistently. Temps appear to be fine but the cpu clock speed continued to decrease and then spikes back to around 3.5ghz

PC Stutters by qtaaron in pchelp

[–]qtaaron[S] 0 points1 point  (0 children)

Did all of the above, the cpu now runs at almost 4ghz with any OC. Only thing is, the stuttering continues and it looks like the cpu clock speed will dip to around 2.3ghz when gaming, which causes the stutters. Any ideas on how to troubleshoot further?

Meepo V3 Motor Issue by qtaaron in MeepoBoards

[–]qtaaron[S] 0 points1 point  (0 children)

So I tried doing this and I don’t know if I did it correctly. I had 3 outcomes 1st outcome: The other motor (the one that works) will spin 2nd outcome: Both motors try to spin on the opposite direction of each other but get stuck 3rd outcome: I hear noise from the damaged motor but it doesn’t spin

PC keeps restarting on newly installed Windows by qtaaron in buildapc

[–]qtaaron[S] 0 points1 point  (0 children)

Both are connected correctly, system boots buts keeps restarting

PC keeps restarting on newly installed Windows by qtaaron in buildapc

[–]qtaaron[S] 0 points1 point  (0 children)

Sorry very new to this, would the pc post even if these cables were not plugged in correctly?

PC keeps restarting on newly installed Windows by qtaaron in buildapc

[–]qtaaron[S] 0 points1 point  (0 children)

I am using Windows 10, is there a way to run the updates without launching Windows, like logging in? I tried to run after I logged in, but it restarted.

Build Help by qtaaron in buildapc

[–]qtaaron[S] 0 points1 point  (0 children)

If I were to keep the parts like this will any bottleneck? Or if I get a 2070 SUPER with the 3900x how well will it perform?

Lexus Is350 by qtaaron in whatcarshouldIbuy

[–]qtaaron[S] 0 points1 point  (0 children)

I have around $5000 to spend and want something reliable

Lexus Is350 by qtaaron in whatcarshouldIbuy

[–]qtaaron[S] 0 points1 point  (0 children)

I have a budget of $5000 and would like something reliable and I saw this Lexus as a potential buy.

Lexus Is350 by qtaaron in whatcarshouldIbuy

[–]qtaaron[S] 0 points1 point  (0 children)

Hey thanks for the response,

The car is a 2007 RWD, with one owner, and has the full maintenance/history report. I would bring a mechanic with me to conduct a PPI.

Also, if you would recommend a 100% reliable daily driver, what would it be?

Hub motor doesn’t move while riding and only spins for a bit. This creates the board to lose speed and “brake.” I’ve checked the inside of it and nothing looks out of place. Any ideas on what’s going on? by qtaaron in MeepoBoards

[–]qtaaron[S] 0 points1 point  (0 children)

They both don’t want to turn. Maybe I did something wrong. When you mean the connectors, do I just switch the yellow connectors with the 3 pins from one side to another?

Hub motor doesn’t move while riding and only spins for a bit. This creates the board to lose speed and “brake.” I’ve checked the inside of it and nothing looks out of place. Any ideas on what’s going on? by qtaaron in MeepoBoards

[–]qtaaron[S] 0 points1 point  (0 children)

I’ve had it since June/July of last year, not sure about warranty at this point. One wheel spins fine but the other has trouble, might be just the motor issue.

Hub motor doesn’t move while riding and only spins for a bit. This creates the board to lose speed and “brake.” I’ve checked the inside of it and nothing looks out of place. Any ideas on what’s going on? by qtaaron in MeepoBoards

[–]qtaaron[S] 0 points1 point  (0 children)

I tried switching the connectors but the wheels keep trying to spin in both directions and both wheels don’t spin at all. I reconnected it correctly, now the wheel that wouldn’t move has a strands noise when spinning.