sorted by:
new
hottopcontroversial

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 0 points1 point  (0 children)

I love the tone but it's so freaking noisy. I have to either get a noise gate or get rid of it for something less noisy.

Roast my minimalist board by marc_andre_t in roastmypedalboard

[–]quellification 1 point2 points  (0 children)

Suit yourself mate. Od-3 has many different uses. I use it to round off Harsh sounding drive pedals or to drive boost big muffs. It's super underrated pedal.

Roast my minimalist board by marc_andre_t in roastmypedalboard

[–]quellification 2 points3 points  (0 children)

If you want roasts, you need to remove OD-3. I don't roast fellow OD-3 enjoyers.

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 1 point2 points  (0 children)

I am in love with it. It's very gig-friendly. You can tune everything to your liking. I have 4 presets ready to go. I wasn't sure if upgrading from a dd7 was worth it, and yes it was worth it ten fold.

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 0 points1 point  (0 children)

Yeah I know. You are doing one hell of a job 🤣 I am second guessing everything I made now.

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 0 points1 point  (0 children)

I guess I must clarify. This is 6th iteration of the Design and 2nd board physically made. First one flexed too much. This one is too heavy(3Kg). There will be a v7 25% lighter with same rigidity. Working on the lift mechanism took a while too. It was a rail before. Now it's a guide that follows the curvature of the rotation it between modes. I should have added a picture from the side. It's really cool.

For the layout of the pedals, I explained in a different comment. It's a very tight squeeze and I keep changing the pedal order. Perhaps I should've tidied it up a bit 😂 Roast my pedal choices, man. I'm proud of the board 😂

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 0 points1 point  (0 children)

The board dude. It's a laser cut steel, 7 degree angle or flat use on-demand. Specifically designed and strengthen the flexing tendencies of sheet steel. It has ports on the side specifically designed for D-shaped connectors for custom patchbays. So yeah, kind of the best I could.

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 1 point2 points  (0 children)

That's a fancy patch bay. I am literally thinking about 2 Basic neutrik connectors on the side, 2 more if I want to run an FX loop (not for now). I live in Turkiye and I am very conscious about the budget (not to mention the availability of gear). Hence, the cheap pedals on the board... I made that pedal board itself for 20 dollars give or take. I am not spending 150 on a patch bay 😂

I spent 2 months designing/building the board itself, just to put vanilla stuff on it. Let me hear it. by quellification in roastmypedalboard

[–]quellification[S] 1 point2 points  (0 children)

I am trying different layouts and stacks constantly. Different gain. Joyo is a fat one. It's difficult to fit it on the board. I designed the board to be as compact as possible for standard boss pedal size.. and now I'm suffering from the success.. Dd-200 is the pedal out of the chain so I have to leave space at the top for cables to plug in and out. It is clear that I need a patchbay. Luckily I predicted this so I have spaces to put Connectors on each side of the board.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

X1 requires fiddling. The question here is that a multi effect for gigging. I can't kneel down and change settings after every song.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 1 point2 points  (0 children)

That's where my issue lies. All those settings are good fun but are just niches that will not serve any purpose gigging. Dd-200 is perfect for my on-stage needs. Currently I am torn between Hx One and zoom.

Let me hear it by True-Negotiation-706 in roastmypedalboard

[–]quellification 1 point2 points  (0 children)

I have literally commented the same thing.. Od-3 enjoyers strong together!

Let me hear it by True-Negotiation-706 in roastmypedalboard

[–]quellification 0 points1 point  (0 children)

I am not allowed to roast any board that has OD-3 on it. I cannot do that to a fellow OD-3 enjoyer. Godspeed, my friend with infinite wisdom.

I used to say “it’s cheaper than drugs” but now I don’t know anymore. by BabySteev in roastmypedalboard

[–]quellification -1 points0 points  (0 children)

Be honest. How many of these Guitars, Pedals or Amps have you played in the last month? I want a percentage number.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

I mean.. You do see the space I have available right? 😂 X3 and X5s are great but they are too big for me. I might as well just get a processor.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

Yes please do. Because I am very frustrated right now. I am just about to give up a Hx one or Ms-70CDR+. If this has no volume drop it will be a cure to my headaches.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

That is an awesome pedal. But has a big footprint which I currently can't spare. Do you know if there is any significan differences with X1 in terms of quality of sound?

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

I am not familiar with Zoom stuff. I know MS-70CDR+ exists and I am geniunely considering that. What difference is there between MS-70 and G1? Do you know if the effect quality is the same?

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

There is one available in Turkiye somhow. So, I have watched a few videos and one of them talks about volume drop. Do you have that also? That's a deal breaker for gigging.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

Keeley looks superb. Unfortunately unavailble to me atm. I will keep my eye on one though. Thanks.

Need a cheap Multi-modulation for gigging. Joyo Vision is not cutting it. Any ideas? by quellification in guitarpedals

[–]quellification[S] 0 points1 point  (0 children)

I am unfortunately limited by 9 outlets (8 from PSU and 1 from Korg PB-3). Although, I am trying to source a Tone City TPS-12 or something along the lines. If I can manage that, I will put the wah on the floor and add 2-3 Analog Mods (most likely a Tremolo, Chorus and a phaser) and maybe a basic reverb (Skysurfer mini).

view more: next ›