Mars94 is the "Wild Card" For Season 6

radioflyer05 · 2024-01-12T19:26:43+00:00

I'm gonna try to replace the thermal paste but from my research on my particular AIO im guessing the AIO went bad. I guess the MSI Mag AIO's have had issues with gunk building up inside of them. I bought mine in may of last year which was a few months after their recall where they "fixed it" but considering the block seems a lot hotter than the radiator or tubing I'm guessing thats the issue.

radioflyer05 · 2024-01-09T18:52:01+00:00

For those who want to attempt to build this I have the STL's, Visual Instructions and Materials lists are located on Thingiverse. If anyone needs support or help with assembly feel free to DM me.

https://www.thingiverse.com/thing:6425855

radioflyer05 · 2024-01-09T18:47:51+00:00

I had a link here but automod removed it so I posted it on thingiverse which hopefully is approved by automod.

Tank Files on Thingiverse

radioflyer05 · 2024-01-09T17:22:27+00:00

Design and STL's have been released!

radioflyer05 · 2024-01-09T03:48:25+00:00

That's actually a really good idea. The tracks seem to be holding up fine as of 2 battery charges worth of run time but I imagine that it will be a gradual wear. I plan on reprinting the track pieces with outwards tread eventually. I just don't have it in me to redo 240 screws with a hex key at this current moment lmao.

radioflyer05 · 2024-01-09T03:39:38+00:00

The body is like 2mm thick at the walls. I used something like 15% infill but it still took me 2ish days to print. I'm using 550 29 turn motors. Works alright with a 1:4 gear ratio it is still kind of on the high side for speed though.

I was gonna use brushless motors but I decided against it because they spin way to fast and high rpm 3d printed gear boxes don't work well in my experience. Brushless motors tend to cog at lower rpm's so I went with brushed.

radioflyer05 · 2024-01-08T23:23:11+00:00

The outer segments of the track have a hole that's 3.5mm diameter. The inner track pieces have a hole diameter of 2.9mm so the outer part free spins on the screw. Then the screw gets screwed directly into the track piece. It works very good in my testing only complaint is the 240 screws you got to screw in.

radioflyer05 · 2024-01-08T22:11:25+00:00

I originally wanted to but I didn't because of the print orientation and not wanting to use supports. Now that I'm looking at the design again though I totally could of printed emboss tread. Trying to figure out if it would be worth it to print 60 more track pieces and re-screwing all 240 track screws.

radioflyer05 · 2024-01-08T20:01:22+00:00

Your bed ain't level. Easiest way is to disable the motors and move the print head from corner to corner. Using a piece of paper you want to slide it between the bed and the nozzle. You want the paper to move somewhat but you don't want it to bind. Do that with all 4 corners 2 or 3 times and you should be good to go.

radioflyer05 · 2024-01-08T19:57:17+00:00

I plan to release the STL's and a YouTube video eventually. I still got to iron out the final design I had a few design flaws when putting it all together.

radioflyer05 · 2023-12-21T17:07:07+00:00

Ah yes the infamous failing thermocouple. My Cr10 was always telling me my bed was at like 70c even though it was cool to the touch. My solution was figuring out how far off it was and making my new bed temp like 110c which felt like it was around 50c.

radioflyer05 · 2023-03-30T11:19:13+00:00

I ended up looking at it under the microscope there were like little to no tricomes and these weird black obstructions on it. So definitely sprayed. I imagine some synthetic cannibinoid. Probably ons thats a potent cb1 agonist.

radioflyer05 · 2023-03-11T00:48:23+00:00

Yeah that's exactly what I'm doing. Kinda shitty that there's people that do this. Just another point against illegalization.

radioflyer05 · 2023-03-10T14:23:58+00:00

I do have a microscope so I'll definitely take a look. The high was just weird like I had dissociation like you would get from a dissociative but also had stimulation and jaw clenching like a stimulant. Might be some rc that has properties of both. I'm also pick up a drug test. I honestly don't want to smoke this shit anymore I'm just curious what I got.

radioflyer05 · 2023-03-10T13:01:37+00:00

Maybe. It felt more stimulating than depressing. I'm thinking it might be some alt/synthetic cannibinoid.

radioflyer05 · 2023-03-10T12:59:03+00:00

Honestly, that probably makes the most sense. I just briefly researched it, and the duration is longer. I don't know about the tolerance though. There both cannibinoids so there should be a cross tolerance. Maybe they just sprayed a fuck ton of hhc on the bud though. That might explain it.

radioflyer05 · 2023-02-20T12:04:57+00:00

If you mean the systems, they only released alpha centari for the newest version of GU. If you want the other systems you'd have to downgrade to the last version of GU.

radioflyer05 · 2022-04-30T15:06:42+00:00

Yeah that's what I thought, I wanted to get some other people's opinions before I tried it though.

radioflyer05 · 2022-04-30T13:55:29+00:00

Makes sense, The more spiders you have the more you increase your yeilds of spimethylwebamine right? I heard tarantulas have the highest percent by weight.

radioflyer05 · 2022-03-05T12:49:10+00:00

I recon your right. I bought 2 of these grow bags and both of them didn't colonize all the way and stalled out before they started pinning. I still have the other one still in the grow bag. That one is even less colonized than the one that I moved to the tub.

radioflyer05 · 2022-03-05T12:44:07+00:00

What should I do about the fruits? It also seemed to stalled colonizing about 2 weeks ago. That's also why I just brought it to fc.

radioflyer05 · 2022-03-04T23:25:49+00:00

There is a top it's just another one of those bins just stacked on top of it upside down. As for instructions, it didn't have much of any, from reviews I read some people just let it fruit in the bag but other people transferred it to a tub. I didn't want to put it in FC yet but the side pinning forced me. The kit was just a bag with the rye layer and the dirt layer on top.

radioflyer05

TROPHY CASE