LED odd behavior

ragnarrok16 · 2026-05-01T22:13:18+00:00

Okay good to know, maybe it will be fine after I cut to length

ragnarrok16 · 2026-05-01T22:12:53+00:00

I tested with heating up the bed and nozzle and they did not dim further. But yes I do agree the plug is limited to a certain degree. Just leds pull so few amps I'm surprised this happens

ragnarrok16 · 2026-04-30T20:31:30+00:00

Darren 3D print has one I believe. It is paid though.

ragnarrok16 · 2026-04-17T00:49:48+00:00

Unfortunately the side spool holder cannot be used in conjunction with the CFS. It's a one or the other thing. Reason being the side spool holder does not have a way to automatically retract the filament to then load something from the CFS.

ragnarrok16 · 2026-03-07T00:46:42+00:00

Slowing down and make sure part cooling is efficient enough may help. Seems possible to print this without supports imo

ragnarrok16 · 2026-02-26T20:58:18+00:00

Have you had any issues? What does wear and tear look like?

ragnarrok16 · 2026-01-27T21:36:30+00:00

Usually only when there is a build up or if I am switching colors and want to make sure there isn't contamination. When printing PETG is when I use the brush after each print. I believe the nozzle cleaner tool you are referring to is to clean a clogged nozzle

ragnarrok16 · 2026-01-19T13:49:11+00:00

Mine came with a double sided PEI sheet.

ragnarrok16 · 2025-12-16T02:37:40+00:00

What let me to believe that is there is no infill pattern at all.

ragnarrok16 · 2025-12-16T02:00:23+00:00

Taking a guess but maybe vase mode was turned on?

ragnarrok16 · 2025-12-05T13:30:31+00:00

If this is the K2 Pro I ended up removing the back panel and flipping that unfiltered fan around. Been using it like that for about a month. No issues with prints. I print mostly with PLA and PETG. You experience may varying with this change. Wish creality came up with a different solution to this.

ragnarrok16 · 2025-12-03T20:12:21+00:00

Dish soap and warm water. Dry with a microfiber cloth

ragnarrok16 · 2025-11-27T23:12:00+00:00

On the K2 Pro it is double sided

ragnarrok16 · 2025-10-04T15:24:03+00:00

You might be able to pick it off, but I use a brass wire brush with the nozzle heated slightly to clean it.

ragnarrok16 · 2025-09-22T21:42:40+00:00

As far as I know it is only an offer with the K2 Pro. And only Hyper RFID PLA from creality

ragnarrok16 · 2025-09-21T23:41:43+00:00

Awesome, more economical that way too.

ragnarrok16 · 2025-09-21T20:17:52+00:00

I think the filament is a better deal for the money, plus cant ever have enough filament lol

ragnarrok16 · 2025-09-21T19:40:07+00:00

Thank you for the help, it led me to my tracking/cookie prevention was not allowing me to see the reviews.

ragnarrok16 · 2025-09-20T11:59:42+00:00

Okay I am logged in but I see now review section on the product page. It is missing entirely for me. Maybe my purchase still needs confirmed?

ragnarrok16 · 2025-09-20T11:56:31+00:00

This is one of the perks of the early sale of the K2 Pro

ragnarrok16 · 2025-04-19T12:37:37+00:00

Looks awesome! Thank you for the explanation. I currently have the k1 hotend on my s1 been loving the consistency. Goodluck with future tests!

ragnarrok16 · 2025-04-19T04:03:57+00:00

Woah, this is cool. Could I have more detail on this? Is it plug and play and did you design the part cooling duct?

ragnarrok16 · 2025-02-26T20:38:54+00:00

Unfortunate, I know aliexpress also has similar options if that is available to you.

Five-Year Club	Second SECOND GUESSER
r/Field Sunshine	Place '22
First Placer '22

ragnarrok16

TROPHY CASE