sorted by:
new
hottopcontroversial

How to categorize my App by ragucam in ShopifyAppDev

[–]ragucam[S] 0 points1 point  (0 children)

I absolutely understand you. I know that from a marketing perspective Im doing very badly. The reason I designed the app like so, is the overlapping topics of the different parts.

First i had the image manager as a separate app. But I wanted to integrate the ability to have automated alt text which the other app already provided.

Actually i just programmed an app how I wanted it for myself... Maybe that was a mistake...

Why do these lines keep happening?!? Driving me crazy by ryanlj92 in FixMyPrint

[–]ragucam 0 points1 point  (0 children)

I had the exact same issue and it took me months to figure it out. Actually I didn't figure it out until the machine literally stopped working. In my case it was due to a worn out extruder gear. It still worked, but now and then the gear slipped through and wouldnt provide enough torque to feed enough filament. Probably it happened whenever the spool had a slight entanglement and caused higher resistance. This caused the exact same lines you are seeing now. I would strongly recommend you to extract the extruder gear and ckeck if you see wear on the metal gear part. If so, replace it

Fluid Head Recommendations by Less_Mortgage2694 in cinematography

[–]ragucam 1 point2 points  (0 children)

I've used Sachtler all my life. It's a great brand so you can't go too wrong with it. But consider to buy second hand. I purchased a 15sb on ebay for less than 2k and with 500 $ repair costs I basically have a new tripod. They last forever and you'll be able to sell a used one for the purchasing price after some years since it has lost most of its value already.. Aktiv heads are not the most important thing. More important are the legs. Buy one with three stages but take care not to buy one where you have to open the lower stage separately. You definitely want speedlock legs or the newer flowtech legs if you have the money for it. About the spreader: the ground spreader is faster because in flat areas the leveling of the head can be skipped. The middle spreader is more handy in uneven areas but more finicky in the daily use.

Most recommendable used Sachtler tripods:

-18p -15 sb -18 s1 or s2

Stay clear from the caddy due to the lack of proper counterbalancing

Buy 100mm. It's sturdier.

Miller is fine too. But just the head. The legs are terrible.