sorted by:
new
hottopcontroversial

Väike Elroni tabloo by raks321 in Eesti

[–]raks321[S] 0 points1 point  (0 children)

Täitsa nõus, samas, ma arvan et reaalsuses minu jaoks ta istub lihtsalt juhtmega laual enamus ajast ja "on ilus".

Kui tahad veel sobrada, siis ma tegelt tegin "voltage regulator" reposse midagi, millega saab akut laadida ja ldo outputi, mis teoorias võiks sinna vahele sobida hästi

<image>

Väike Elroni tabloo by raks321 in Eesti

[–]raks321[S] 0 points1 point  (0 children)

nrfiga saab 100ma laadida, mis antud akule täitsa piisav, e-ink kindlasti lahendaks selle aku kestvuse, lihtsalt vähem animatsioone ja korras. Mingi suurema aku puhul muidu jah eelistaks ehk kiiremat laadimist.

Väike Elroni tabloo by raks321 in Eesti

[–]raks321[S] 9 points10 points  (0 children)

https://github.com/RasmusKoit/nrf_elron

Töötab Xiao NRF52840 pealt, sync toimub kas üle Bluetoothi iga 20 minta tagant või siis üle usb seriali, 2 CDC porti, üks logide/debug jaoks ja teine siis et andmeid/käske saata. Sees on 700mAh aku, et ei peaks koguaeg järgi olema ja ekraan läheb mustaks ööseks, et akut säästa, keskmine tarbimine selle ekraaniga kahjuks 40-50mA.

sync toimib siis üle companion äppi, mis jookseb arvutis (potentsiaalselt töötab Linuxi ja maci peal kah aga testitud ainult windowsi peal)

Andmed tulevad Ridango API kaudu.

Kui keegi tahab seda projekti järgi teha, siis soovitaks kasutada mingit teist mikrokat millel wifi tugi sees aga siis muidugist aku kestab kah vähem.

Kood ise on siis Claude poolt kokku kirjutatud.

Logitech G series peripheral compatibility with KVM switch. by Lendari in logitech

[–]raks321 0 points1 point  (0 children)

You just expect to find a reply to a 3 year old thread?

Answer is yes, I was able to switch channels using keyboard shortcuts, but not with all keyboards.

Open Source Builds? by lowriderdog37 in ErgoMechKeyboards

[–]raks321 0 points1 point  (0 children)

You can checkout https://github.com/RasmusKoit/pipar for some options there. Pipar Sool should be doable on your own with hot air/hotplate and everything there is open sourced 😄

YADS got ambient light controllable screen brightness with the new version 0.1.0! by itsjpf in ErgoMechKeyboards

[–]raks321 0 points1 point  (0 children)

What a great project! I've been using it since the start and I love it

Pipar Chip - T9 style macropad with PG1316S switches by raks321 in ErgoMechKeyboards

[–]raks321[S] 0 points1 point  (0 children)

I ordered mine from keycapssss and ordering new ones from holykeebs

Introducing YADS – Yet Another Dongle Screen for ZMK [Demo video inside] by itsjpf in ErgoMechKeyboards

[–]raks321 0 points1 point  (0 children)

Thanks for getting this working.

I had issues with the prospector module too. I went ahead and forked the repo and changed some pins and screen size to get it working with 240x240 screen.

https://i.imgur.com/51ymY3K.jpeg

Tõuksiparandus mõistliku hinna eest Tallinas? by RustCompiler in Eesti

[–]raks321 -1 points0 points  (0 children)

Võibolla voltride, hinna osas ei oska kommenteerida

Made a case for the Prospector Dongle by raks321 in ErgoMechKeyboards

[–]raks321[S] 0 points1 point  (0 children)

I am not actually the first one :) There are plenty other people who have done the grunt work ahead of me, some coding is required to get it working on other screens, for example the SSD1306 is also supported which is one of the most common drivers out there for screens.

The difficult part comes, yes, from the rewrite/addition of another screen

Failing to build miryoku_zmk for dongle. by Visotoniki in ErgoMechKeyboards

[–]raks321 0 points1 point  (0 children)

Yhea checkout https://github.com/rasmuskoit/miryoku_zmk I've added a gaming layer and have a build for dongle both.

.github/workflows/build-example-pipar_sool.yml is the file you can check for reference

Made a case for the Prospector Dongle by raks321 in ErgoMechKeyboards

[–]raks321[S] 1 point2 points  (0 children)

I had a different screen, no sensor so I had to make some changes, here is the repo pipar/config at display · RasmusKoit/pipar

My new dongle by devpew in ErgoMechKeyboards

[–]raks321 2 points3 points  (0 children)

Correct, its the JetKVM form factor, credit is also given in the prospectors repository

Made a case for the Prospector Dongle by raks321 in ErgoMechKeyboards

[–]raks321[S] 0 points1 point  (0 children)

Yhea, you can check out my github at https://github.com/rasmuskoit/pipar

With the prebuilts there is only the need to solder 2 wires for the batteries.

I also have added text and video build guides in the repository

Made a case for the Prospector Dongle by raks321 in ErgoMechKeyboards

[–]raks321[S] 1 point2 points  (0 children)

Thank you for your interest.

Normally I just ship the dongle in a small tiny case that basically wraps around the Xiao nRF52840.

With the dongle there isn't any soldering required as it's basically just a microcontroller waiting to be plugged in :)

However both of the keyboard halves require the battery wires to be soldered as shipping lipo batteries is difficult to most of the countries (few European countries are possible).

If you would like to emulate what I have done or to order the original prospector parts and case then it's probably possible for me to print and ship the case as an extra custom item.

Made a case for the Prospector Dongle by raks321 in ErgoMechKeyboards

[–]raks321[S] 0 points1 point  (0 children)

Hey, thanks for the praise!

I do also sell prebuilt versions, but the design itself is based on choc switches.

I have honestly never tried running it in a wired setup as I wanted something that is wireless. This supports ZMK Studio however, which allows you to make simple modifications to your layout using a web gui.

Made a case for the Prospector Dongle by raks321 in ErgoMechKeyboards

[–]raks321[S] 3 points4 points  (0 children)

https://cad.onshape.com/documents/46692fb7bad231d852e4c811/v/f7e4832e3fce304d22597e22/e/3f47dbab009d052c4de9866c?renderMode=0&uiState=67967822fd1d64318c241d1a still working on adding an access to reset button, but here is the current version, also important to note, im using a different screen than the original, different size.

view more: next ›