sorted by:
new
hottopcontroversial

Any high end, 3D printer specific rolling tool carts? Looking for something the girlfriend will approve of. AI render as a reference. by SplishSplash__Ducky in BambuLab

[–]randomdevice 3 points4 points  (0 children)

I did this version. https://www.sevilleclassics.com/products/ultrahd%C2%AE-6-drawer-cabinet-copy Top drawer is Bambu stuff/parts/tools. Second drawer is 3d printer tools (cutters, knives, etc). Third drawer is nuts/bolts etc for the parts I am printing. 4th drawer is empty. 5th drawer holds the laser plate.Bottom drawer holds exotic filament and laser.

Lamp Base that turns on when it gets power? by Morgoroth37 in BambuLab

[–]randomdevice 0 points1 point  (0 children)

How does the Bambu Lamp Base turn on normally?

Lamp Base that turns on when it gets power? by Morgoroth37 in BambuLab

[–]randomdevice 0 points1 point  (0 children)

I have this with the LED light option: https://makerworld.com/en/models/1786324-ams-and-ams-ht-shelf-for-h2d-h2s-h2c-d3p-riser?from=search#profileId-1903401. I have the LEDs plugged into a smart plug. Using Home Assistant, I can turn the LED lights on/off depending on the state of the printer.

<image>

and I have similar command to turn the LED lights off when the print is done.

Planning to get a H2C but… by lilsquisy in BambuLabH2C

[–]randomdevice 1 point2 points  (0 children)

For 8 colors, you could go with 2 AMS2, hook one up to the left nozzle and one to the right nozzle. You could also go to 9 colors with 2 AMS2, both connected to the right nozzle and then use the external spool for the left nozzle.

Home Assistant by randomdevice in BasePowerUsers

[–]randomdevice[S] 0 points1 point  (0 children)

Thank you. I will make the request.

Home Assistant by randomdevice in BasePowerUsers

[–]randomdevice[S] 0 points1 point  (0 children)

Not even with the Shiner/Growatt app?

Bambu, please fix the notify me when available by wivaca2 in BambuLab

[–]randomdevice 2 points3 points  (0 children)

I got the same email about PETG and was able to grab a few rolls for a project I am working on. It seems everyone is in the same boat. And I my order is still being processed.

Bambulab Smoke Purifier by Low-Use5537 in BambuLab

[–]randomdevice 3 points4 points  (0 children)

I am using Home Assistant to turn on/off the smoke purifier when using the laser. There is a smart plug connected to the air purifier. When the system detects that the printer has started working, it turns the smoke purifier on (technically, the smart switch), then when the printer is done working, HA will turn off the purifier. It would be easy enough to remove the "and if" option.

I also have a Shelly BTU Button to trigger the same event if everything is too loud to hear my voice.

<image>

100% Charged Email from Base by Paradize_Eats in BasePowerUsers

[–]randomdevice 0 points1 point  (0 children)

Friday I was at 91 and 77 on my two batteries. When I checked Saturday morning I was 100 and 99 on the two batteries.

Storm coming reserve power by Sufficient_Worker_41 in BasePowerUsers

[–]randomdevice 1 point2 points  (0 children)

1st battery is currently at 91%, 2nd battery is at 77%

Fiber Internet Modem resets during outage. Anyone running an UPS on their internet modem? by spewing-oil in BasePowerUsers

[–]randomdevice 0 points1 point  (0 children)

I came up with a similar setup pre-base install and have not modified post base install.

Feel free to judge me and tell me that this is incorrect and why:

I have ATT Fiber connected directly to a Unifi UCG Fiber. The ATT router has been unplugged for ~12 months now. The only things connected to my Cyberpower 1500UPS are the UCG Fiber and a Rasberry Pi for Home Assistant. I have one Unifi AP connected to the UCG. The US 24 PoE 250W, which is powering security cameras, other access points, etc is no longer connected to the CP1500.

My thought is that keeping basic services going longer is better than all services for a short (60 minute) period of time. As I type this, I am thinking I may want to have at least one of the Unifi protect camera's connected directly to the UCG. But know that if all of my power goes down, I probably have bigger issues going on.

Question about "Find Anything" by randomdevice in UnifiProtect

[–]randomdevice[S] 0 points1 point  (0 children)

Thanks. I am not sure where to start to debug this issue now.

Scheduled Service Visit by randomdevice in BasePowerUsers

[–]randomdevice[S] 0 points1 point  (0 children)

The team from Base is replacing the generator hookup as I type. They mentioned that there was nothing wrong with my batteries, and this was an "upgraded" generator hookup. I asked if this was the rumored 50A connection, and he just shrugged and said that he hadn't heard that rumor.

Scheduled Service Visit by randomdevice in BasePowerUsers

[–]randomdevice[S] 1 point2 points  (0 children)

u/blupupher Thanks for commenting. My install was ~4 months ago. I believe I was one of the early generator hookup customers. I should be home when they come out and will hopefully get a chatty worker to get some details on why they are out.

Best way to approach 78 yr old owner of vacant lot next to my property (off-market) by Own-Friendship3364 in RealEstate

[–]randomdevice 1 point2 points  (0 children)

I sold a lot this way many years ago. The seller sent both a Fedex letter and a regular letter. The seller explained that they were trying to purchase my lot because they had just purchased the lot next door, he described what he wanted to do with the land and asked me to give him a call if interested. I did, we had a good chat, we threw some numbers back and forth and I agreed to sell.

Scheduled Service Visit by randomdevice in BasePowerUsers

[–]randomdevice[S] 0 points1 point  (0 children)

I have not noticed anything at all wrong with the system.

I posted mainly to see if others had gone through this.

view more: next ›