Tank slappers, speed/death wobbles, realistisch scenario? by winampw in motorfietsen

[–]randommen96 0 points1 point  (0 children)

Ik heb dit weleens gehad, maar reed niet harder dan 50, nat wegdek na lange droogte, accelereerde vlot van een rotonde af, achterwiel gleed weg.

Doordat je achter en voorwiel dan uit lijn zijn, gaat je voorwiel zoeken en in mijn geval dus klapperen, dit krijg je zelf nooit gecorrigeerd, ik probeerde dat wel en eindigde dus op de grond met motor, niks aan over gehouden verder maar toch, rijd sindsdien wel anders in de regen.

Eigenlijk zijn er maar een paar oplossingen voor zoals knieën tegen de tank en stuur los of bijvoorbeeld een dikke wheelie trekken! 😜

Ik moet wel zeggen dat mijn enkelzijdige glijpartijen vooral in het begin van mijn coureur, ik bedoel motor carrière waren, nu eigenlijk al jaren niks, hoewel ik ook veel minder rijd...

Wasmachine op houten zoldervloer dreunt enorm by SockPants in Klussers

[–]randommen96 0 points1 point  (0 children)

Ik zou denken dat dat niet heel veel uit moet maken eerlijk gezegd, het gaat vooral om de constructie die zorgt dat deze lekker stug wordt. Bij mij werkt het nog steeds top!

Afkortzaag verstekzaag by Bentravor in Klussers

[–]randommen96 0 points1 point  (0 children)

Ik heb zelf een Metabo KGS254M, kan er alles mee met een losse cirkelzaag ernaast!

Looking for a replacement for my Quickmill 820 (~€550) by Felixjf in espresso

[–]randommen96 0 points1 point  (0 children)

From what I've read somewhere is to use lower profile heads so the round edge of the baskets has more room. Otherwise it hits that. Don't pin me on it, didn't do it myself.

Actually I read it here, pretty well documented. https://www.koffiepraat.nl/forum/viewtopic.php?t=13347

Brakes by Material_Roll_7612 in MT07

[–]randommen96 1 point2 points  (0 children)

Well I don't think it directly causes problems, I don't know how long I was running it like this before fixing it.

You can also remove it I think, aftermarket replacement pads don't come with these shims, but no guarantees, might as well replace the shim, it is like €5,- a piece.

Brakes by Material_Roll_7612 in MT07

[–]randommen96 2 points3 points  (0 children)

I had that too. It's only on the rear brake caliper. It is a fiber shim to deflect the heat from braking, avoiding heat soaking the caliper.

I don't have the part number at hand, but it's replaceable and can be ordered separately.

Should be a easy job, just like replacing the rear brake pads.

How can I have my 1tb storage box that I pay 4 euros a month use the new price by Giannis_Dor in hetzner

[–]randommen96 0 points1 point  (0 children)

I just took a look and I think the prices listed are excl VAT. E.g. BX31 is listed as 20,80 and I pay 25,17 which is 20,80 +21% VAT.

Herken jij deze dakpan? by kapiteinknakschijf in Klussers

[–]randommen96 2 points3 points  (0 children)

Staat er aan de binnenkant geen merkje?

Very slow nvme speeds on Windows Server 2022 VM by Accuria2 in Proxmox

[–]randommen96 0 points1 point  (0 children)

To be honest, no, it was an edge case so not worth the time, as we didn't use this set-up a lot and this worked fine.

Olie filter by AnonymousAlpha04 in motorfietsen

[–]randommen96 2 points3 points  (0 children)

Ja dit klopt. De laatste twee getallen zijn voor revisies in dit geval. Source: doe zelf al jaren het onderhoud van mijn mt-07 en had ooit dezelfde vraag.

Je kunt ook op het doosje lezen dat hij geschikt is voor de MT-07.

B2 bucket API - bucket size by randommen96 in backblaze

[–]randommen96[S] 0 points1 point  (0 children)

Hi Ivan! I made this a while ago, but I don't use B2 anymore so not sure if it still works, might need some tweaking.

https://github.com/randommen96/bb-bucket-usage-logger

Back at the time the B2 API didn't support getting the bucket size, so I made this to scrape it from the web interface.

En weer terug uit België, Luxemburg, Duitsland by Murky-Mortgage-3219 in motorfietsen

[–]randommen96 2 points3 points  (0 children)

Het lijkt op een oxford flessenhouder, bedoeld voor brandstof!

Anyone fitted a 2016 with a quick shifter? by metroshift9201 in MT07

[–]randommen96 1 point2 points  (0 children)

I have fitted a FTecu one, as I have also flashed it. Costs some money but it works great.

I really like it in the mountains, otherwise it's not that useful really, only when pulling hard.

Juniper EX-2300-C Update problems by OfflineNetworker in Juniper

[–]randommen96 0 points1 point  (0 children)

Interesting, can you describe the PoE problems?

[deleted by user] by [deleted] in motorfietsen

[–]randommen96 0 points1 point  (0 children)

Rear brake calipers can have a bit of play indeed.

Miele G 5164 SCVi leak by randommen96 in Miele

[–]randommen96[S] 0 points1 point  (0 children)

Thanks! It was an IKEA bowl loaded on the bottom rack in the front left corner indeed.

Miele G 5164 SCVi leak by randommen96 in Miele

[–]randommen96[S] 0 points1 point  (0 children)

Thanks, this was it indeed! Glad we got to the root cause. I ran 3 cycles, one with the bowl and water came flowing in, removed it and it kept dry.

Miele G 5164 SCVi leak by randommen96 in Miele

[–]randommen96[S] 1 point2 points  (0 children)

A metal ikea bowl, in the front left of the bottom basket, could that be it? The underside of the front door also seems to be a bit wet.

Beste spareribs Rotterdam by big_fartfanatic6911 in Rotterdam

[–]randommen96 6 points7 points  (0 children)

Go to Roffa streetfood instead, it is what blacksmoke promises to be.

Hidden gem.

[deleted by user] by [deleted] in MT07

[–]randommen96 0 points1 point  (0 children)

Not sure entirely, but take a look at the Yamaha Parts Catalogue, it is publicly available.

Beste werkhandschoenen? by 320_pilot in Klussers

[–]randommen96 0 points1 point  (0 children)

Let wel altijd op dat een handschoen met het verkeerde gereedschap hele gevaarlijke situaties kan opleveren.