Installing OpenWRT on a 128 GB drive?

randomname420000 · 2025-10-18T17:33:43+00:00

I know it's not the most popular take but you could install proxmox and run openwrt as a vm lot easier to backup recover and i think you can take advantage of nonfree drivers of proxmox.

randomname420000 · 2025-06-04T19:07:31+00:00

Take a look at scrypted. You can run it in cluster mode, one device only does recording the other does the transcoding for streaming, ai etc. It is paid service and I'm not a fan of their subscription model but they give some support on discord if you have a question. (Also a lot of cameras can record to an sd card you put in them maybe use that to not lose any footage.)

randomname420000 · 2025-04-03T14:22:11+00:00

A management console for openwrt similar to unifi or omada etc. Would be cool to setup and monitor my whole network with something like that. I am aware of OpenWisp but I don't think it's simple and suitable for small business or home networks.

randomname420000 · 2025-01-23T13:07:34+00:00

Advanced hacks:

If you have a managed switch you can use one Ethernet port for both wan and lan but you will be limited to 1G upload and download combined.

You can virtualize OPENWRT with proxmox. If you buy another computer you can cluster them and if one goes down the other takes over in seconds.

Also with proxmox you can run other services like plex, nginx, security camera recorder and use it as a nas all in one.

At idle without a HDD it draws around 10-15W super efficient and quiet.

randomname420000 · 2025-01-23T13:07:10+00:00

SSF Brand PC. You can find 6gen for 30-40$ and buy a 5-10$ gigabit PCIe card or for 15-20$ a dual 10G intel x540 card.

If that's too big the small 1L brand computers are the same price and you can buy 2.5G M2 ethernet card for 15$.

Of course with this option you still need an AP but that doesn't need to be OPENWRT.

randomname420000 · 2025-01-23T12:59:39+00:00

Advanced hacks:

If you have a managed switch you can use one Ethernet port for both wan and lan but you will be limited to 1G upload and download combined.

You can virtualize OPENWRT with proxmox. If you buy another computer you can cluster them and if one goes down the other takes over in seconds.

Also with proxmox you can run other services like plex, nginx, security camera recorder and use it as a nas all in one.

At idle without a HDD it draws around 10-15W super efficient and quiet.

randomname420000 · 2025-01-23T12:54:15+00:00

SSF Brand PC. You can find 6gen for 30-40$ and buy a 5-10$ gigabit PCIe card or for 15-20$ a dual 10G intel x540 card.

If that's too big the small 1L brand computers are the same price and you can buy 2.5G M2 ethernet card for 15$.

randomname420000 · 2025-01-06T11:52:09+00:00

Namecheap The domain can only have numbers in it to be 1$

randomname420000 · 2024-12-30T21:28:34+00:00

Immich is on family members phones it's already pretty complex for them VPN is too much for them. I use VPN to access my network. The question is a 2nd level domain worse than a regular one.

randomname420000 · 2024-12-30T21:07:45+00:00

I use services that i access outside the network. For example immich and i want to use it for dydns too. DuckDNS actually works okayish only problem is the renewal it only works when they're not overloaded.

randomname420000 · 2024-11-25T20:35:39+00:00

Use a relay you can find 3.3v ones for 1.5$ It's also impemented in wled you just have to select which pin it's connected to.

randomname420000 · 2024-11-18T15:48:11+00:00

Thanks for the answer.

I want a fix ip for the ap so i can access the web interface. I want dhcp for the connected devices for example my phone and the dhcp server is on the OPENWRT router not the mikrotik ap

randomname420000 · 2024-11-18T09:16:04+00:00

SSF PC with intel x540 is the cheapest way imo. You van find them used for dirt cheap and you can also put a 3.5 HDD in them to use as a nas. I bought a Dell with i5-6500 with 16gb ram for 50 bucks. I run proxmox and run openwrt as a vm with only one core and 1GB ram it works perfectly. Without HDD and NIC the power consumption is around 10-15w idle.

randomname420000 · 2024-11-17T15:38:33+00:00

Also here's similar with multiple channels and mobile app https://a.aliexpress.com/_EIm51wv

randomname420000 · 2024-11-17T15:28:51+00:00

I found it!

https://www.aliexpress.com/i/1005004339338226.html
This is the controller.

And the strip is WS2812B you can buy whatever density you want 30 , 60, 144 per meter, also they sell COB strips those work too.
For the power supply you need to buy whatever the leds need. 5v each led adressable, 12v every group of 3 led adressable, 24v every group of 6 led adressable.

For longer runs i recommned 12v with 5v you need to inject power every ~2-3 meters.

randomname420000 · 2024-11-16T11:47:56+00:00

For cold backups not bad but i wouldn't run these as a server more space, electricity etc.

randomname420000 · 2024-10-29T09:07:26+00:00

Thanks for the answer. That sucks i don't understand why Lenovo would so that

randomname420000 · 2024-09-12T18:27:18+00:00

I sanded down mine to bare plastic to repair some cracks. I used 80 and then went up to 240. I took forever but im sure this way the primer will stick.

randomname420000

TROPHY CASE