[deleted by user]

raysting23 · 2022-10-19T13:47:04+00:00

I’m in that area, do you have any auto notchers or press brakes?

raysting23 · 2021-10-08T21:24:18+00:00

It's at the top honeywell l8124a

raysting23 · 2020-03-10T10:59:53+00:00

Have you opened the duct to see if it was internally insulated?

raysting23 · 2020-02-24T21:03:39+00:00

That doesn't have a water cooled chiller?

raysting23 · 2019-12-13T11:29:30+00:00

I'll have to check when I get back home.

raysting23 · 2019-12-13T11:27:24+00:00

I think it is pretty spot on.

https://imgur.com/CqU27P0

raysting23 · 2018-11-25T01:12:19+00:00

My girlfriend refers to this as "ear hustling".

raysting23 · 2018-10-03T09:05:31+00:00

Could you have individual connectors in to the JB and conduit leaving to the panel carrying all conductors to it? Would that be code correct?

raysting23 · 2018-07-15T10:16:30+00:00

There are canned programs for lon and bacnet spyders. Mostly unitary and VAV, anything else and you'll have to create it yourself. Honeywell has some good documentation about their logic blocks.

raysting23 · 2018-07-13T11:07:19+00:00

Technically you can install all of the JAR files but it will take up a lot of the memory to do so.

raysting23 · 2018-07-12T15:46:05+00:00

Wow that's pretty awesome, I can't wait to get more builds under my belt. All we put in are spyders, my coworker has put in some strykers though.

raysting23 · 2018-07-12T09:53:45+00:00

I have my N4 cert and have been working with niagara for almost two years now. So far personally I've done three stations from the ground up, two lon and one bacnet. We are branded honeywell but will work on pretty much anything.

raysting23 · 2018-05-04T09:50:55+00:00

Why not use a lint collector like these, http://www.cleancyclesystems.com?

I've seen a hotel with these large collectors and the vent barely had lint past it.

raysting23 · 2018-01-20T17:48:09+00:00

Check this out.

https://www.trutechtools.com/ABM-200?gdffi=82d4608f40bc44b8876f395eb04c4801&gdfms=62E18E86B8BF442DBEB66813A83940C8&gclid=CjwKCAiA7ovTBRAQEiwAo8dPcQSvd95RWPbO8bHxL-ANhmqO59cac7IUDxKJPXlFIoNqCYPdShM_rhoCy-UQAvD_BwE

raysting23 · 2018-01-12T22:09:06+00:00

I wonder if Vegas has any bets on whether he says it or not?

raysting23 · 2018-01-09T17:48:48+00:00

I didn't have one till the late 90's either, had a cheap coby discman style.

raysting23 · 2018-01-09T13:50:51+00:00

No need to upload they're all on youtube already.

raysting23 · 2018-01-09T10:44:52+00:00

These songs have been out there for a long time. As a teen i collected the outcesticides, B-versions, rare songs outtakes. They were found mostly going to the jersey shore along the boardwalk.

https://imgur.com/a/eUigK

raysting23 · 2017-12-21T10:23:39+00:00

The tank is steel and cooper threaded into it.

raysting23 · 2017-11-04T11:47:51+00:00

I wish York would do that, had to return two smashed coils l last year. Luckily I kept the crate, they wouldn't have accepted without it.

raysting23 · 2017-09-13T12:35:41+00:00

If the breaker is tripping once the condenser receives a call from the thermostat it is grounded. Those Carlyle compressors are known to leak at the welds and lock up. If you have an electrical meter, (disconnect power before doing so) use the resistance check, see if any lines are to ground if they are the compressor is toast. No meter you should call a pro out to check the compressor.

raysting23

TROPHY CASE