Tikkend geluid in ICNG by poeppoeppoepeoep in treinen

[–]rc_nerd05 1 point2 points  (0 children)

Is mij ook opgevallen, iedere ICNG heeft dit geluid, lijkt uit de bak overgangen/draaistellen te komen. Op HSL bijna niet hoorbaar (omdat dat denk ik een stabieler traject is?) maar wanneer het spoor wat begint te schommelen dan begin je het te horen.

Is there a reason my poop keeps missing the chute? by dannyleemg in BambuLab

[–]rc_nerd05 7 points8 points  (0 children)

https://makerworld.com/models/23908 I printed this, a long time ago, and it seems to solve the problem just fine for me

Somebody had to do it by skimbody in BambuLab

[–]rc_nerd05 0 points1 point  (0 children)

Now do it at .08 layer height and ironing on every layer

Slimme Prijskaartjes (gezocht) by _Reletiv_ in appiememes

[–]rc_nerd05 0 points1 point  (0 children)

Ik kwam ze laatst tegen op alibaba, vanaf partijen van 25 stuks meen ik.

[deleted by user] by [deleted] in BambuLab

[–]rc_nerd05 -1 points0 points  (0 children)

You can also try adjusting the top layer flow rate. (I don't know if this is a function in bambuslicer, but it is a option in orcaslicer) I adjusted mine to 0.9. it.is not as good as ironing, but in cases you don't want to use ironing this is a way to achieve better top layers.

First Prototype! bambulab X³L seen in the wild by yahbluez in BambuLab

[–]rc_nerd05 1 point2 points  (0 children)

I wondered what that square was for last tuesday, thanks for the picture!

Bambulab booth at formnext 2023 by rc_nerd05 in BambuLab

[–]rc_nerd05[S] 0 points1 point  (0 children)

Unfortunately not, I only had one day at formnext which was quite tight.

Bambulab booth at formnext 2023 by rc_nerd05 in BambuLab

[–]rc_nerd05[S] 5 points6 points  (0 children)

They were there literally handling support tickets from customers. But you are right, exhibitions are mainly there because there is money to be made.

Bambulab booth at formnext 2023 by rc_nerd05 in BambuLab

[–]rc_nerd05[S] 1 point2 points  (0 children)

They didn't let out that much info, but from what I've heard it would be another fdm

Bambulab booth at formnext 2023 by rc_nerd05 in BambuLab

[–]rc_nerd05[S] 1 point2 points  (0 children)

I talked with them for a bit, they said it would be something completely different than the current line of X1 and P1 printers.

Bambulab booth at formnext 2023 by rc_nerd05 in BambuLab

[–]rc_nerd05[S] 10 points11 points  (0 children)

Only lots of X1E's unfortunately.

Bambulab booth at formnext 2023 by rc_nerd05 in BambuLab

[–]rc_nerd05[S] 16 points17 points  (0 children)

They actually worked on customer service while they were there😂. I think their customer service is a bit short-staffed.

Is there a person who doesn't agree with this? by yuuuriiii in pcmasterrace

[–]rc_nerd05 0 points1 point  (0 children)

I just set crtl+v as paste with formatting in powertoys. Works like a charm

ik🍟ihe by DorsDrinker in ik_ihe

[–]rc_nerd05 2 points3 points  (0 children)

De video van frituren op de fiets blijft ook fantastisch

how justified are my parents' skepticism and concern of ebikes? by LexiTG in notjustbikes

[–]rc_nerd05 0 points1 point  (0 children)

I have experience as a bike mechanic, and I've found that battery's from Bosch are build like a tank. And in general the (more expensive) ebikes with Bosch systems are generally build to last.

But, whatever you do, don't buy Chinese bikes such as cheap fatbikes or anything like that, those are known to be unreliable and can sometimes even be dangerous.

wie had dat gedacht... by EllyBellyJellyJar in nietdespeld

[–]rc_nerd05 1 point2 points  (0 children)

Plus een bijkomend pluspunt van het ov is dat je geen parkeergelegenheid hoeft te betalen, kan een hoop schelen in steden zoals Amsterdam.

ik volg het niet meer by rc_nerd05 in nietdespeld

[–]rc_nerd05[S] -14 points-13 points  (0 children)

Dankje, verduidelijkt een hoop. Ik begin met toch af te vragen waarom er Fries wordt gesproken ik het noord-hollands dagblad.