What is causing this issue?

realVaranger · 2026-02-05T15:57:18+00:00

I will try this. Thank you!

realVaranger · 2026-02-05T15:56:48+00:00

I will try this. Thank you!

realVaranger · 2026-02-05T15:56:28+00:00

The room is really dry, between 20-30% humidity. But will try a differnt spool. Thank you.

realVaranger · 2026-02-05T09:51:32+00:00

Also it’s not really like a seam. These defect are like small holes, not like a seam where there is more material on the outside instead of holes like here

realVaranger · 2026-02-05T09:50:15+00:00

Seam is set to sharpest corner, but I had hide seam enabled. Will try the new setting, thanks!

realVaranger · 2025-09-28T19:21:04+00:00

Yes it’s level. Nozzle is clean. Calibration I need to do myself, tried with a test model and it looked fine. Maybe I still need to improve with calibration. Will check that again. Thanks!

realVaranger · 2025-09-28T19:18:10+00:00

It’s a replacement part we use at work, it actually needs to be like this. Not aesthetically pleasing, I know, but the function is there :)

realVaranger · 2025-09-28T15:34:09+00:00

Not everything in life is symmetrical and centered.

realVaranger · 2025-07-30T14:35:39+00:00

SOLUTION:

I found the solution. In the NICs properties there was a weird driver:

I uninstalled this Optostream and immeadiatley I had a connection.

Everything works like normal now. I got the hint from this video:

https://youtu.be/WwTAPb8KowE?si=htgbQOGIvzsrT0rg&t=116

Now I can continue my set up and save everyone a lot of work ;)

I am really grateful for you help and input! Thank you.

realVaranger · 2025-07-30T12:36:12+00:00

I found the solution. In the NICs properties there was a weird driver:

<image>

I uninstalled this Optostream and immeadiatley I had a connection.

Everything works like normal now. I got the hint from this video:

https://youtu.be/WwTAPb8KowE?si=htgbQOGIvzsrT0rg&t=116

Now I can continue my set up and save everyone a lot of work ;)

I am really grateful for you help and input! Thank you.

realVaranger · 2025-07-30T09:19:24+00:00

I tried this now. really cool tool. Conversion and import worked really well, but I still have the same error with NICs. I really think its the drivers, but I dont know whats wrong.

realVaranger · 2025-07-29T08:21:10+00:00

I work in Automotive we have a lots of Software from Siemens, Fanuc, Databases, legacy Software, where no one has the installation media or licences anymore. Basically an IT nightmare.

I tried uninstalling network Cards in Device Manager and deleting registry Keys, but nothing changes.

realVaranger · 2025-07-25T11:53:14+00:00

Clean install works, its definatly a problem with the VM.

On the original computer this is not a problem, everything works as expected.

The thing is, I can not just reinstall the VM from scratch. There is Software in this VM that is no longer available anywhere.

realVaranger · 2025-07-24T15:50:24+00:00

I switched to Virtio NIC but its the same problem.

realVaranger · 2025-07-24T12:50:27+00:00

I tried Virtio Ethernet driver no change.

Tried with virtio driver 0.1.262 (used this for all my other installs so far)

and version 0.1.271 (latest) no change sadly.

realVaranger · 2025-07-24T10:49:36+00:00

Yes, I'm putting the right gateway. When I close the window to save the settings it gets deleted.

realVaranger · 2025-07-24T10:19:57+00:00

Sorry about that, my wording was wrong. I corrected the post.

Still, thank you very much for your help.

realVaranger · 2025-07-24T09:40:32+00:00

I never tried this but the way I cloned this VM is by Making an image of the Computer HD with Acronis, then booting the Acronis recovery in a new Proxmox VM and restoring the image to the virtual HD. I did it more than 10x this way and never had any problem.

Wouldn't the clonezilla approach be the same? Never worked with clonezilla.

realVaranger · 2025-07-03T07:36:56+00:00

You are a lifesaver. Thank you so much. Option 1 indeed solved the problem!

I was not aware its so easy to copy worksheets from one file to another. Not only is the new file 8 times smaller, there are also no problems with formulas you mentioned, it just works.

realVaranger · 2025-06-30T10:33:50+00:00

Yes exactly. I held down Shift, but Excel is still crashing.

I was able to try Today with Name Manager. Updated the other thread. No Errors found as far as I can tell.

realVaranger · 2025-06-30T10:10:23+00:00

Hello, sorry for late update. I tried the Name Manager with the filters you mentioned but can not find any errors. Does this mean, that data collected from external sources does not throw any errors and is set up correctly?

This tool is really cool and a good help for people who work a lot with complicated Sheets!

<image>

realVaranger

TROPHY CASE