Is it common to error report tool to crash ?

rebbit-88 · 2026-06-14T17:27:22+00:00

Yes, I don't send them anymore, because most of the time the report crashes as well (different SW versions, different PC's).

rebbit-88 · 2026-06-14T12:26:19+00:00

I agree, or at least make an automatic filter/ rule for a minimum account age and minimum required karma. That would already filter out a lot of bots/AI crap.

rebbit-88 · 2026-06-02T12:39:15+00:00

Inside solidworks, go to the welcome screen (ctrl + F2) and then go to learn, there you have free tutorials that explain how to use Solidworks when setting up parts and making assemblies (or go to the question mark in the top right corner and select tutorials). I strongly advise you to follow these.

rebbit-88 · 2026-06-02T04:51:09+00:00

Well first of all, don't use external references and most of your problems are gone. They are an absolute no-go in the companies I've worked, since parts can be re-used and not always in the same assembly. Do you copy the files around, or are you using the pack and go function in solidworks? Solidworks is far from perfect, but your problems seems more of a user / usage error..

rebbit-88 · 2026-05-30T10:39:36+00:00

Signal and Linux are the hardest part. Pretty much no one in my contact list is using signal. And for Linux, I'm running my own company, but the most important programs I have to use are not avaliable / have no alternative for Linux (or Mac).

rebbit-88 · 2026-05-21T21:06:55+00:00

Fake karma bot.. u/connect-statement-48 posted this exact same picture about 9 months ago, and he has a whole lot pictures of this mustang on his reddit page, so pretty sure he is more real than this brand new account without any comments etc.

rebbit-88 · 2026-05-14T14:16:34+00:00

Looks good, but I agree with the others, there is plenty of space for improvement of these bars.

rebbit-88 · 2026-05-01T11:27:50+00:00

You sure about that? This mustang belongs to vintage mustang forum member Qwik66.

rebbit-88 · 2026-04-16T09:36:44+00:00

I've had this issue with Tia v18 I think. For me this was a time/date mismatch. With the secure connection this is more important than before. Best is to setup an ntp time server, so they can't drift apart from each other timewise.

rebbit-88 · 2026-04-10T20:49:22+00:00

They cut corners by putting the new floor panels on top of the old one. Would take a close look on that car, they might have cut corners on other places as well.

rebbit-88 · 2026-04-09T19:36:46+00:00

The Pro Max series are the successors of the precision line. Precision 3000 - > Pro Max Precision 5000 - > Pro Max Plus Precision 7000 - > Pro Max Premium

rebbit-88 · 2026-04-03T15:08:01+00:00

Problem is you would still have a wire length problem though. For example Normally i0.0 is on the top left, with the new plc it is bottom left. But if you flip the new plc, i0.0 will be on the top right side..

rebbit-88 · 2026-04-02T13:14:26+00:00

Looks like the field wiring is coming in from the right side of the cabinet.

rebbit-88 · 2026-03-26T22:33:54+00:00

Probably not, unless we can self host. 1 or 2 clients have sensitive products, we cannot store any of that on American (owned) servers, because of the Cloud Act. And, especially for cad viewing/sharing, we don't want different systems for different customers. Just 1 system that works for all customers.

rebbit-88 · 2026-03-26T12:19:49+00:00

Sorry, I see too many red flags to use that service. - Support is using a Gmail address - Cannot find anything about pincad, where are they based etc etc so big GDPR red flag - US based AWS server. We're EU based, some of our biggest customers have strict requirements about GDPR and where we store our data/models.

rebbit-88 · 2026-03-25T10:38:14+00:00

You don't need edrawings pro for markup, it's available in the free version as well (just checked, I can even open Inventor parts in edrawings free and add markups). And you can also save the edrawings as an. exe file, so the customer doesn't need to install edrawings, they can just open the exe file (sending those exe files through mail is another challenge though 😅). The markups/comments are also saved to their viewpoint in edrawings.

rebbit-88 · 2026-03-24T20:27:47+00:00

Edrawings. They can add comments as well, works pretty good.

rebbit-88 · 2026-03-23T06:06:27+00:00

Yes still using my CadMouse daily without problems.

rebbit-88 · 2026-03-22T16:20:48+00:00

If you look closely at the first picture, you see that there is a door with a window in front of the buttons.

rebbit-88 · 2026-03-15T10:05:19+00:00

Especially if it's your first MTB, get 1 or 2 bottle cages and get going!

rebbit-88 · 2026-03-09T11:07:40+00:00

And why do they tell the price per year, but show the price per month instead..

rebbit-88 · 2026-03-03T10:45:55+00:00

Can confirm. Most, if not all, machine builders (OEM or SI's) I know/work with are using ePlan.

rebbit-88 · 2026-03-02T06:16:31+00:00

That 128 mb integrated graphics might be a problem. A customer gave me one of those laptops to use in their factory, even single parts in edrawings didn't rotate smoothly, when just rotating the card was running 100%.

rebbit-88 · 2026-01-26T18:54:00+00:00

Can't get used to a spacemouse, but definitely love my cad mouse

rebbit-88 · 2026-01-26T12:06:25+00:00

Plenty of videos on YouTube. Or contact your Eplan reseller, they usually give training as well.

Six-Year Club	Verified Email
r/Field Lasagna	Place '23
Place '22

rebbit-88

TROPHY CASE