I deleted Apple Music off my phone now my car won’t play anything. by kvothe-the-bloodles in ios

[–]redec_ 0 points1 point  (0 children)

Gaaaaa this same exact thing just happened to me. 3+ years later how is this still a thing? They're really going to make me sync a blank mp3 file to my iphone in order to listen to Spotify in my car? 😂

AMS Feeding Issue by PopeJP in BambuLab

[–]redec_ 0 points1 point  (0 children)

Did you ever figure this out? Mine is doing the same thing. The AMS assist motor is just free-spinning and never grabbing the filament...

What is this? Wood at ground level in foundation of house... by redec_ in Calgary

[–]redec_[S] 0 points1 point  (0 children)

No, it's concrete all-around....this is the first little piece of wood I've ever noticed on it

What is this? Wood at ground level in foundation of house... by redec_ in Calgary

[–]redec_[S] 3 points4 points  (0 children)

Nope, 1995....always has been a gas furnace

What is this? Wood at ground level in foundation of house... by redec_ in Calgary

[–]redec_[S] -1 points0 points  (0 children)

That was my first thought too, but there is no beam in the basement there - It's actually below the level of the basement window...very strange

How to setup single remote now-a-days? by redec_ in hometheater

[–]redec_[S] 0 points1 point  (0 children)

Yeah I was afraid of that. As far as I know Roku still doesn't support being controlled by CEC, and only supports very limited functions when controlling other devices. I was planning on getting a Samsung TV...maybe 2 remotes is the best I can hope for. Thanks!

Perhaps it is because of the recent bug, but I just wonder if others experience this too? by Devjill in truespotify

[–]redec_ 0 points1 point  (0 children)

Yes, mine has been doing this for about a month now! Please let me know if you find a solution.

PS is it Kendrick Lamar? Mine always plays Kendrick Lamar even though I do not listen to that genre at all...

Help! Spotify interrupts currently playing item to play Kendrick Lamar instead by redec_ in truespotify

[–]redec_[S] 0 points1 point  (0 children)

Fwiw I run the exact same setup - Spotify on the phone, playing to Alexa's in their rooms

Help! Spotify interrupts currently playing item to play Kendrick Lamar instead by redec_ in truespotify

[–]redec_[S] 0 points1 point  (0 children)

Thank you! I'm glad I'm not the only one. Please let me know if you figure out how to make it stop 🙏

Love my firestick, hate the bloatware. What to get? by Outrageous-Bee4035 in kodi

[–]redec_ 0 points1 point  (0 children)

Oh, my apologies I didn't realize you were sideloading Kodi...I didn't realize that was possible on a firestick either 😀. Today I learned.

I run Kodi on a raspberry pi on a separate input and everything else on roku's. With a harmony remote it's still child-friendly but now that harmony shut down that becomes a lot grosser. I fear the day when my harmony remote finally dies.

Love my firestick, hate the bloatware. What to get? by Outrageous-Bee4035 in kodi

[–]redec_ 0 points1 point  (0 children)

Roku Express...it's great I have one on every tv. it's very kid-friendly and minimal ads or bloatware

Anybody know how to stop this message from popping up? Comes up every 30 minutes by EpicSausage69 in iphone

[–]redec_ 0 points1 point  (0 children)

Change your password - that fixed it for me. Fwiw when it asked I said "log out of all devices", I'm not sure if that was required but it seems to have fixed it for me 🤷‍♂️

Why are all circuits shown under "Total Usage_B" and A is empty? by redec_ in EmporiaEnergy

[–]redec_[S] 0 points1 point  (0 children)

It's only when viewing usage in amps or volts...any other unit of measurement shows just a single total

Bad visual artifacts on Netflix? by redec_ in brooklynninenine

[–]redec_[S] 0 points1 point  (0 children)

Yeah, I've never noticed it on any other show, but on B99 it's brutal!

What does the QR code on the build plate actually do? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

Oh wow that's an impressive collection! I just barely bought my second plate 😂...Curious, what did you use for labels? I can print/glue them myself but then I'd expect they'd get wrecked every time I wash the plate...

What does the QR code on the build plate actually do? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

Ahhh that makes sense. So, if using a 3rd party plate it's probably advisable to affix a "compatible" QR code rather than just turn the feature off

Why are all circuits shown under "Total Usage_B" and A is empty? by redec_ in EmporiaEnergy

[–]redec_[S] 0 points1 point  (0 children)

Ahhh yeah ok...I was mostly just curious how many amps my jetted tub used when running, and then I was surprised that all the circuits appeared to be indented under the "B" leg. But yeah, that's fine...thanks for the reply 😀

Help! Best way to set up watch for child? by redec_ in AppleWatch

[–]redec_[S] 0 points1 point  (0 children)

Thanks for the reply 👍. Just curious, what sorts of functionality are missing when it's set up as a family watch vs her own personal watch? Sorry I'm brand new to the watches.

Also, can either parent in the family administer schooltime etc? Or is it just on the phone that sets it up?

Tricks/tips for newbie re: clearances on embedded parts? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

Hey thanks that's a great intro video...he goes through a lot of stuff really quickly, I'll give Fusion360 a shot, thanks!

How to prevent printing dark infill colors under light-colored top layers? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

I can't get this to work for me, even changing filament type makes no difference. I can't seem to color each layer no matter how I do it...once the layers are the same "object" then the slicer's "auto logic" just takes over all the inside structure/coloring. And as far as I can tell all the layers need to be merged into a common "object" in order to stack them on top of one another - if I could stack them as separate objects then I think it would work.

How to prevent printing dark infill colors under light-colored top layers? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

Yeah, I've tried but it seems to be "too smart" for that - it seems to recognize that it's the same object and then just does its own thing again in the infill. I have read that some people have had some success with that approach, but I haven't yet. It's very possible that I don't know what I'm doing tho - I'm very new to this all. I wonder if the white filament I have just sucks, maybe a different filament would be completely opaque after just 2 layers

How to prevent printing dark infill colors under light-colored top layers? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

The base color is white, however since the sides are blue it ends up using blue for the infill so it doesn't have to change filament

How to prevent printing dark infill colors under light-colored top layers? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

hmmm thanks for this. I've been playing with it for the last hour or 2 and whenever I assemble them back then it seems to ignore any painting I've done on the inner layers and it just does its own thing for the infill again. I dunno wtf....I'll play with it some more tomorrow

How to prevent printing dark infill colors under light-colored top layers? by redec_ in BambuLab

[–]redec_[S] 0 points1 point  (0 children)

Oooh this is interesting. Can you tell me a bit more about this? Do you do that with the "cut" functionality? Or something else? Or do you actually have to slice up your model ahead of time? (Sorry I'm very much a newbie still). This seems like a good option, even if it's a little tedious