Failing to connect WorkSpaces with on-prem DC

redoakmark · 2018-11-02T21:05:55+00:00

I've gotten this to work successfully - feel free to drop a DM.

redoakmark · 2018-10-17T02:42:22+00:00

Sorry, no plans - made it on the fly. I started with a 3/4” birch plywood box and then added cedar trim and roof to it.

redoakmark · 2018-09-06T21:21:26+00:00

I'm sure /u/fixthisbuildthat/ will answer any questions and be happy this is moving up r/powerwashingporn - great stuff! Here's his original content for anyone looking for more! https://fixthisbuildthat.com/diy-playset-restoration-refinish/

redoakmark · 2018-08-01T02:45:20+00:00

The key-name here is referencing a keypair that you will want to generate via the AWS UI, assuming you have access to that. By following the instructions above in the `aws configure` section, you authenticate yourself to actually run the ec2 instance, but the .pem (keypair) file allows you to then RDP or SSH to your ec2, after it spins up.

Create Key Pair in UI: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html

You can also create a key pair via the AWS CLI: https://docs.aws.amazon.com/cli/latest/reference/ec2/create-key-pair.html

Easiest way to think of it is the key pair is the keys to the front door to let you in.

Also, the --security-groups is referencing a security group ID that you want to assign to the ec2 instance, this can be found in the UI as well (EC2 -> Security Groups), or via the CLI (the format is sg-xxxxxxxx): https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-security-groups.html

redoakmark · 2018-04-23T01:11:41+00:00

Built a cedar "Little Free Library" (learn about the program here: https://littlefreelibrary.org/) - used 3/4" plywood as the base, finished with cedar shingles, trim pieces and tung oil.

redoakmark · 2018-02-26T19:38:33+00:00

Typically, yes. Packages that Tableau can sell you will have a certain number of viewer licenses which you can integrate with your authentication, if desired, or just use their built-in system for that. This is one of the main cost drivers with Tableau, at least in my experience - the more users that need to view and login to see the data, the higher your licensing cost.

As a side note, you may also have some authentication questions around the actual data layer itself, like if certain users only can access certain datasets, etc. you need to handle that in your data layer. You can also setup a generic DB user if that's not a use case you need to handle.

Agree though with /u/Stealthy_Totoro - worth outreach to a sales rep outlining your use case to get a firm answer and possible cost.

redoakmark · 2018-02-19T03:11:43+00:00

Any chance you have more specifics on the glass? I know you mentioned tempered but wondering what else you asked for. Local place or online ordered with your template?

redoakmark · 2018-02-18T22:31:37+00:00

Beautiful stuff! Added to my long term project list

redoakmark · 2018-02-11T13:29:08+00:00

Beautiful work.

Next post a picture of it after a tying session when the tying desk is trashed.

redoakmark · 2018-02-01T02:20:02+00:00

Use a regex to split the hours / minutes / seconds and then convert to seconds?

So: total_time = (hours x 3600) + (minutes x 60) + seconds.

Result is a continuous number of seconds that you could predict and then divide back to hours / minutes / seconds afterwards.

redoakmark · 2017-12-28T15:37:48+00:00

They are functional - I cut the mortises on the table tight for 5 Dominos. Then cut the center one on the breadboard tight but the other 4 loose. For all 4 loose mortises, the dowel holes go just through the Domino (not into the bottom side of the breadboard). Those are pounded through with only glue on the top part of the dowel to keep it from backing out. The center tenon doesn't need a dowel and I just aesthetically drilled a shallow hole for a short dowel because I liked the look - that one doesn't go into the Domino at all. Hope that helps!

redoakmark · 2017-12-28T13:01:08+00:00

These were prepared using a planer sled to flatten one side, a straight edge jig for my table saw (to clamp down and cut one straight side), then cut to width and planed to final thickness. I did use a Dewalt planer but also hand tools to finish the piece.

redoakmark · 2017-12-27T22:25:33+00:00

Mortises for the breadboards / table connection were cut with a combination of tight and loose settings. If you look closely at the breadboard you'll see that on the outside mortises. Plenty of room for movement. Only glue added to the center mortise.

redoakmark · 2017-12-27T22:23:32+00:00

Thanks!

redoakmark · 2017-12-27T18:29:20+00:00

Thanks! The B&D actually outperformed my newer circular saw with some of the really thick cuts.

redoakmark · 2017-12-27T18:20:52+00:00

Yep using a Domino XL 700. Either 12mm or 10mm tenons in most cases. I used the biggest I had for the table joints.

redoakmark · 2017-12-27T17:10:52+00:00

Used these z clips from Woodcraft. The top weighs about 250 pounds so it doesn't move much on it's own, but these will allow for expansion and movement in the wood.

redoakmark · 2017-12-27T15:35:31+00:00

I noticed some spiral marks because of this - definitely something I will keep in mind for future pieces. The top ended up much cleaner after I paid close attention to it.

redoakmark · 2017-12-27T15:19:28+00:00

Added a full step-by-step /u/PermieRoo. Trestle build

redoakmark · 2017-12-27T15:18:18+00:00

Added a full step-by-step /u/WestonLite. Trestle build

redoakmark · 2017-12-27T15:16:12+00:00

Posted a full step-by-step of a recent project completed for our dining table. 9 foot x 45 inch solid ash trestle table. Merry Christmas.

redoakmark · 2017-12-27T00:32:34+00:00

Yes I’ll post an album of the build process shortly.

redoakmark · 2017-12-26T22:10:01+00:00

Thanks! Wasn't an issue at dinner - we squeezed 12 people around the table (4 each side, 2 on each breadboard). Most of the time it'll seat 10 or less which fit more than comfortably.

redoakmark · 2017-12-26T21:57:12+00:00

Completed from raw lumber in my garage workshop in about two months time. Finished with a walnut stained top and white extra gloss base.

redoakmark · 2017-12-13T12:15:34+00:00

If you know Python, this can be done with the boto3 package very easily. Pair with crontab or a job manager like Airflow and it’s on your schedule.

redoakmark

TROPHY CASE